devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sven Peter <sven@svenpeter.dev>
To: Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
	Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	linux-arm-kernel@lists.infradead.org, asahi@lists.linux.dev,
	iommu@lists.linux.dev, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/4] iommu: dart: Add support for t8103 USB4 DART
Date: Tue, 28 Feb 2023 21:21:32 +0100	[thread overview]
Message-ID: <20230228202132.4919-5-sven@svenpeter.dev> (raw)
In-Reply-To: <20230228202132.4919-1-sven@svenpeter.dev>

This variant of the regular t8103 DART is used for the two
USB4/Thunderbolt PCIe controllers. It supports 64 instead of 16 streams
which requires a slightly different MMIO layout. We also disallow bypass
support since these DARTs will only ever be used for externally facing
devices on the USB4 ports.

Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
 drivers/iommu/apple-dart.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index 7579c97a9062..b9886d40a4d1 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -81,6 +81,7 @@
 #define DART_T8020_TCR_BYPASS_DAPF      BIT(12)
 
 #define DART_T8020_TTBR       0x200
+#define DART_T8020_USB4_TTBR  0x400
 #define DART_T8020_TTBR_VALID BIT(31)
 #define DART_T8020_TTBR_ADDR_FIELD_SHIFT 0
 #define DART_T8020_TTBR_SHIFT 12
@@ -1184,6 +1185,35 @@ static const struct apple_dart_hw apple_dart_hw_t8103 = {
 	.ttbr_shift = DART_T8020_TTBR_SHIFT,
 	.ttbr_count = 4,
 };
+
+static const struct apple_dart_hw apple_dart_hw_t8103_usb4 = {
+	.type = DART_T8020,
+	.irq_handler = apple_dart_t8020_irq,
+	.invalidate_tlb = apple_dart_t8020_hw_invalidate_tlb,
+	.oas = 36,
+	.fmt = APPLE_DART,
+	.max_sid_count = 64,
+
+	.enable_streams = DART_T8020_STREAMS_ENABLE,
+	.lock = DART_T8020_CONFIG,
+	.lock_bit = DART_T8020_CONFIG_LOCK,
+
+	.error = DART_T8020_ERROR,
+
+	.tcr = DART_T8020_TCR,
+	.tcr_enabled = DART_T8020_TCR_TRANSLATE_ENABLE,
+	.tcr_disabled = 0,
+	.tcr_bypass = 0,
+
+	.ttbr = DART_T8020_USB4_TTBR,
+	.ttbr_valid = DART_T8020_TTBR_VALID,
+	.ttbr_addr_field_shift = DART_T8020_TTBR_ADDR_FIELD_SHIFT,
+	.ttbr_shift = DART_T8020_TTBR_SHIFT,
+	.ttbr_count = 4,
+
+	.disable_bypass = true,
+};
+
 static const struct apple_dart_hw apple_dart_hw_t6000 = {
 	.type = DART_T6000,
 	.irq_handler = apple_dart_t8020_irq,
@@ -1276,6 +1306,7 @@ DEFINE_SIMPLE_DEV_PM_OPS(apple_dart_pm_ops, apple_dart_suspend, apple_dart_resum
 
 static const struct of_device_id apple_dart_of_match[] = {
 	{ .compatible = "apple,t8103-dart", .data = &apple_dart_hw_t8103 },
+	{ .compatible = "apple,t8103-usb4-dart", .data = &apple_dart_hw_t8103_usb4 },
 	{ .compatible = "apple,t8110-dart", .data = &apple_dart_hw_t8110 },
 	{ .compatible = "apple,t6000-dart", .data = &apple_dart_hw_t6000 },
 	{},
-- 
2.25.1


      parent reply	other threads:[~2023-02-28 20:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-28 20:21 [PATCH v2 0/4] Apple M1 USB4/Thunderbolt DART support Sven Peter
2023-02-28 20:21 ` [PATCH v2 1/4] dt-bindings: iommu: dart: Add t8103-usb4-dart compatible Sven Peter
2023-03-08 19:31   ` Rob Herring
2023-02-28 20:21 ` [PATCH v2 2/4] iommu: dart: Add flag to override bypass support Sven Peter
2023-03-02 15:04   ` Robin Murphy
2023-02-28 20:21 ` [PATCH v2 3/4] iommu: dart: Write to all DART_T8020_STREAM_SELECT Sven Peter
2023-02-28 20:21 ` Sven Peter [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230228202132.4919-5-sven@svenpeter.dev \
    --to=sven@svenpeter.dev \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=devicetree@vger.kernel.org \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).