From: richard.leitner@linux.dev
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Ladislav Michl <ladis@linux-mips.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Benjamin Bara <benjamin.bara@skidata.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Richard Leitner <richard.leitner@skidata.com>
Subject: [PATCH 3/3] ASoC: maxim,max9867: add "mclk" support
Date: Thu, 02 Mar 2023 12:55:03 +0100 [thread overview]
Message-ID: <20230302-max9867-v1-3-aa9f7f25db5e@skidata.com> (raw)
In-Reply-To: <20230302-max9867-v1-0-aa9f7f25db5e@skidata.com>
From: Benjamin Bara <benjamin.bara@skidata.com>
Add basic support for the codecs mclk by enabling it during probing.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
---
sound/soc/codecs/max9867.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/max9867.c b/sound/soc/codecs/max9867.c
index e161ab037bf7..b92dd61bb2b2 100644
--- a/sound/soc/codecs/max9867.c
+++ b/sound/soc/codecs/max9867.c
@@ -6,6 +6,7 @@
// Copyright 2018 Ladislav Michl <ladis@linux-mips.org>
//
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
@@ -16,6 +17,7 @@
#include "max9867.h"
struct max9867_priv {
+ struct clk *mclk;
struct regmap *regmap;
const struct snd_pcm_hw_constraint_list *constraints;
unsigned int sysclk, pclk;
@@ -663,8 +665,18 @@ static int max9867_i2c_probe(struct i2c_client *i2c)
dev_info(&i2c->dev, "device revision: %x\n", reg);
ret = devm_snd_soc_register_component(&i2c->dev, &max9867_component,
max9867_dai, ARRAY_SIZE(max9867_dai));
- if (ret < 0)
+ if (ret < 0) {
dev_err(&i2c->dev, "Failed to register component: %d\n", ret);
+ return ret;
+ }
+
+ max9867->mclk = devm_clk_get(&i2c->dev, "mclk");
+ if (IS_ERR(max9867->mclk))
+ return PTR_ERR(max9867->mclk);
+ ret = clk_prepare_enable(max9867->mclk);
+ if (ret < 0)
+ dev_err(&i2c->dev, "Failed to enable MCLK: %d\n", ret);
+
return ret;
}
--
2.39.2
next prev parent reply other threads:[~2023-03-02 11:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-02 11:55 [PATCH 0/3] Add "mclk" support for maxim,max9867 richard.leitner
2023-03-02 11:55 ` [PATCH 1/3] ASoC: dt-bindings: maxim,max9867: convert txt bindings to yaml richard.leitner
2023-03-02 13:05 ` Rob Herring
2023-03-02 14:34 ` Richard Leitner
2023-03-02 13:31 ` Krzysztof Kozlowski
2023-03-02 13:48 ` Richard Leitner
2023-03-02 11:55 ` [PATCH 2/3] ASoC: dt-bindings: maxim,max9867: add "mclk" property richard.leitner
2023-03-02 13:31 ` Krzysztof Kozlowski
2023-03-02 14:56 ` Richard Leitner
2023-03-02 11:55 ` richard.leitner [this message]
2023-03-02 12:20 ` [PATCH 3/3] ASoC: maxim,max9867: add "mclk" support Mark Brown
2023-03-02 12:45 ` Richard Leitner
2023-03-02 12:45 ` Claudiu.Beznea
2023-03-02 14:46 ` Richard Leitner
2023-03-03 10:00 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230302-max9867-v1-3-aa9f7f25db5e@skidata.com \
--to=richard.leitner@linux.dev \
--cc=alsa-devel@alsa-project.org \
--cc=benjamin.bara@skidata.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=ladis@linux-mips.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=richard.leitner@skidata.com \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).