[PATCH v5 10/12] riscv: dts: starfive: visionfive-2-v1.3b: Add gmac+phy's delay configuration

[Samin Guo <samin.guo@starfivetech.com>]

v1.3B uses motorcomm YT8531(rgmii-id phy) x2, need delay and
inverse configurations.

The tx_clk of v1.3B uses an external clock and needs to be
switched to an external clock source.

Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2-v1.3b.dts    | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
index 9230cc3d8946..32fae0de9a44 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -11,3 +11,30 @@
 	model = "StarFive VisionFive 2 v1.3B";
 	compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
 };
+
+&gmac0 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+&gmac1 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+	rx-internal-delay-ps = <1900>;
+	tx-internal-delay-ps = <1500>;
+};
+
+&phy1 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+};
-- 
2.17.1