devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Walker Chen <walker.chen@starfivetech.com>
To: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
	Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor.dooley@microchip.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
	Walker Chen <walker.chen@starfivetech.com>
Cc: <dmaengine@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v5 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA
Date: Tue, 14 Mar 2023 16:35:36 +0800	[thread overview]
Message-ID: <20230314083537.22571-3-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230314083537.22571-1-walker.chen@starfivetech.com>

Add DMA reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.

Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
 .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 40 ++++++++++++++++---
 drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  1 +
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 4169e1d7d5ca..4390c91af522 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -21,10 +21,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_dma.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
@@ -46,6 +48,10 @@
 	DMA_SLAVE_BUSWIDTH_32_BYTES	| \
 	DMA_SLAVE_BUSWIDTH_64_BYTES)
 
+#define AXI_DMA_FLAG_HAS_APB_REGS	BIT(0)
+#define AXI_DMA_FLAG_HAS_RESETS		BIT(1)
+#define AXI_DMA_FLAG_USE_CFG2		BIT(2)
+
 static inline void
 axi_dma_iowrite32(struct axi_dma_chip *chip, u32 reg, u32 val)
 {
@@ -86,7 +92,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
 
 	cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
 		  config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
-	if (chan->chip->dw->hdata->reg_map_8_channels) {
+	if (chan->chip->dw->hdata->reg_map_8_channels &&
+	    !chan->chip->dw->hdata->use_cfg2) {
 		cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
 			 config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
 			 config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
@@ -1140,7 +1147,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 	axi_chan_disable(chan);
 
 	ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
-					!(val & chan_active), 1000, 10000);
+					!(val & chan_active), 1000, 200000);
 	if (ret == -ETIMEDOUT)
 		dev_warn(dchan2dev(dchan),
 			 "%s failed to stop\n", axi_chan_name(chan));
@@ -1367,10 +1374,11 @@ static int parse_device_properties(struct axi_dma_chip *chip)
 
 static int dw_probe(struct platform_device *pdev)
 {
-	struct device_node *node = pdev->dev.of_node;
 	struct axi_dma_chip *chip;
 	struct dw_axi_dma *dw;
 	struct dw_axi_dma_hcfg *hdata;
+	struct reset_control *resets;
+	unsigned int flags;
 	u32 i;
 	int ret;
 
@@ -1398,12 +1406,25 @@ static int dw_probe(struct platform_device *pdev)
 	if (IS_ERR(chip->regs))
 		return PTR_ERR(chip->regs);
 
-	if (of_device_is_compatible(node, "intel,kmb-axi-dma")) {
+	flags = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	if (flags & AXI_DMA_FLAG_HAS_APB_REGS) {
 		chip->apb_regs = devm_platform_ioremap_resource(pdev, 1);
 		if (IS_ERR(chip->apb_regs))
 			return PTR_ERR(chip->apb_regs);
 	}
 
+	if (flags & AXI_DMA_FLAG_HAS_RESETS) {
+		resets = devm_reset_control_array_get_exclusive(&pdev->dev);
+		if (IS_ERR(resets))
+			return PTR_ERR(resets);
+
+		ret = reset_control_deassert(resets);
+		if (ret)
+			return ret;
+	}
+
+	chip->dw->hdata->use_cfg2 = !!(flags & AXI_DMA_FLAG_USE_CFG2);
+
 	chip->core_clk = devm_clk_get(chip->dev, "core-clk");
 	if (IS_ERR(chip->core_clk))
 		return PTR_ERR(chip->core_clk);
@@ -1554,8 +1575,15 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
 };
 
 static const struct of_device_id dw_dma_of_id_table[] = {
-	{ .compatible = "snps,axi-dma-1.01a" },
-	{ .compatible = "intel,kmb-axi-dma" },
+	{
+		.compatible = "snps,axi-dma-1.01a"
+	}, {
+		.compatible = "intel,kmb-axi-dma",
+		.data = (void *)AXI_DMA_FLAG_HAS_APB_REGS,
+	}, {
+		.compatible = "starfive,jh7110-axi-dma",
+		.data = (void *)(AXI_DMA_FLAG_HAS_RESETS | AXI_DMA_FLAG_USE_CFG2),
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index e9d5eb0fd594..eb267cb24f67 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -33,6 +33,7 @@ struct dw_axi_dma_hcfg {
 	/* Register map for DMAX_NUM_CHANNELS <= 8 */
 	bool	reg_map_8_channels;
 	bool	restrict_axi_burst_len;
+	bool	use_cfg2;
 };
 
 struct axi_dma_chan {
-- 
2.17.1


  parent reply	other threads:[~2023-03-14  8:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-14  8:35 [PATCH v5 0/3] Add DMA driver for StarFive JH7110 SoC Walker Chen
2023-03-14  8:35 ` [PATCH v5 1/3] dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma Walker Chen
2023-03-17 21:09   ` Rob Herring
2023-03-14  8:35 ` Walker Chen [this message]
2023-03-17 17:36   ` [PATCH v5 2/3] dmaengine: dw-axi-dmac: Add support for StarFive JH7110 DMA Vinod Koul
2023-03-14  8:35 ` [PATCH v5 3/3] riscv: dts: starfive: add dma controller node Walker Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230314083537.22571-3-walker.chen@starfivetech.com \
    --to=walker.chen@starfivetech.com \
    --cc=Eugeniy.Paltsev@synopsys.com \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).