* [PATCH v2 0/4] SM8150 Kumano updates
@ 2023-04-11 18:14 Konrad Dybcio
2023-04-11 18:14 ` [PATCH v2 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs Konrad Dybcio
` (4 more replies)
0 siblings, 5 replies; 7+ messages in thread
From: Konrad Dybcio @ 2023-04-11 18:14 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski
Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel,
Konrad Dybcio, Konrad Dybcio
v1 -> v2:
- no-emmc -> no-mmc [4/4]
- drop superfluous input-enable [3/4]
v1: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v1-0-f1852c2a2378@linaro.org
Add gpio-line-names, set up fixed camera regulators and enable SDHCI2
on Xperia 1 / 5.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Konrad Dybcio (4):
arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs
arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM
arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators
arm64: dts: qcom: sm8150-kumano: Enable SDHCI2
.../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 335 +++++++++++++++++++++
1 file changed, 335 insertions(+)
---
base-commit: 009795d283d1f9f043e5a4ff97d4140cde17e2d3
change-id: 20230315-topic-kumano_dts0-e6c1725cf25b
Best regards,
--
Konrad Dybcio <konrad.dybcio@linaro.org>
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v2 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs 2023-04-11 18:14 [PATCH v2 0/4] SM8150 Kumano updates Konrad Dybcio @ 2023-04-11 18:14 ` Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM Konrad Dybcio ` (3 subsequent siblings) 4 siblings, 0 replies; 7+ messages in thread From: Konrad Dybcio @ 2023-04-11 18:14 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Griffin and Bahamut device trees to better document the hardware. They are the same on both devices! Very nice! Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 47e2430991ca..6753c65d75bc 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -456,6 +456,17 @@ &i2c10 { }; &pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "", + "NC", + "NC", + "", + "NC", + "SUPWC_PWR_EN", + "", + "NC", + "NC"; /* GPIO_10 */ + vol_down_n: vol-down-n-state { pins = "gpio1"; function = "normal"; @@ -466,6 +477,19 @@ vol_down_n: vol-down-n-state { }; &pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "TS_VDDH_EN", + "LCD_ID", + "", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; + snapshot_n: snapshot-n-state { pins = "gpio1"; function = "normal"; @@ -483,6 +507,21 @@ focus_n: focus-n-state { }; }; +&pm8150l_gpios { + gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ + "NC", + "MAIN_CAM_PWR_VMDR_EN", + "NC", + "", + "NC", + "NC", + "FP_LDO_EN", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; +}; + &pon_pwrkey { status = "okay"; }; -- 2.40.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM 2023-04-11 18:14 [PATCH v2 0/4] SM8150 Kumano updates Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs Konrad Dybcio @ 2023-04-11 18:14 ` Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators Konrad Dybcio ` (2 subsequent siblings) 4 siblings, 0 replies; 7+ messages in thread From: Konrad Dybcio @ 2023-04-11 18:14 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the common DTSI to better document the hardware. The pin assignment for TLMM is identical on both devices. Great job! Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 175 +++++++++++++++++++++ 1 file changed, 175 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index 6753c65d75bc..d1a3ab836019 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -541,6 +541,181 @@ &qupv3_id_1 { &tlmm { gpio-reserved-ranges = <126 4>; + gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", + "NFC_ESE_SPI_CS_N", + "NC", + "NC", + "DISP_RESET_N", + "DEBUG_GPIO0", + "MDP_VSYNC_P", + "TS_I2C_SDA", + "TS_I2C_SCL", /* GPIO_10 */ + "CAM_SOF", + "CAM2_RST_N", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "NC", + "MAIN_CAM_PWR_EN", + "CAM3_RST_N", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "NC", + "CAM0_RST_N", + "RGBC_IR_PWR_EN", + "CAM1_RST_N", /* GPIO_30 */ + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "NC", + "DEBUG_GPIO1", + "RGBC_IR_INT", + "USB_CC_DIR", + "NC", + "NC", /* GPIO_40 */ + "NFC_EN", + "NFC_ESE_PWR_REQ", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "NFC_IRQ", + "NFC_DWL_REQ", + "UIM2_DETECT_EN", + "WLAN_SW_CTRL", /* GPIO_50 */ + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "TS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "HW_ID_0", + "NC", /* GPIO_60 */ + "QLINK_REQUEST", + "QLINK_ENABLE", + "WMSS_RESET_N", + "SDM_GRFC_8", + "WDOG_DISABLE", + "NC", + "NC", + "PA_INDICATOR_OR", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", /* GPIO_70 */ + "SDM_RFFE0_DATA", + "SDM_RFFE0_CLK", + "SDM_RFFE1_DATA", + "SDM_RFFE1_CLK", + "SDM_RFFE2_DATA", + "SDM_RFFE2_CLK", + "SDM_RFFE3_DATA", + "SDM_RFFE3_CLK", + "SUB_CAM_PWR_EN", + "FP_RESET_N", /* GPIO_80 */ + "NC", + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DVDT_WRT_DET_AND", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "UDON_SWITCH_SEL", + "SD_CARD_DET_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "USB_AUDIO_EN1", /* GPIO_100 */ + "DISP_ERR_FG", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_DET", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NFC_CLK_REQ", + "SW_SERVICE", + "NC", + "RF_ID_EXTENSION", + "ALS_PROX_INT_N", + "FP_INT", + "DVDT_WRT_DET_OR", + "BAROMETER_INT", /* GPIO_120 */ + "ACC_COVER_OPEN", + "TS_INT_N", + "CODEC_INT1_N", + "CODEC_INT2_N", + "TX_GTR_THRES_IN", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "NC", /* GPIO_130 */ + "DVDT_ENABLE", + "ACCEL_INT", + "NC", + "MAG_INT_N", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "HW_ID_1", + "NC", /* GPIO_140 */ + "NC", + "NC", + "CODEC_RST_N", + "CDC_SPI_MISO", + "CDC_SPI_MOSI", + "CDC_SPI_SCLK", + "CDC_SPI_CS_N", + "NC", + "LPASS_SLIMBUS_CLK", + "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ + "LPASS_SLIMBUS_DATA1", + "USB_AUDIO_EN2", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "COMPASS_I2C_SDA", + "COMPASS_I2C_SCL", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", /* GPIO_160 */ + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "SSC_UART_1_TX", + "SSC_UART_1_RX", + "WL_CMD_CLK_CHAIN0", + "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ + "WL_CMD_CLK_CHAIN1", + "WL_CMD_DATA_CHAIN1", + "WL_BT_COEX_CLK", + "WL_BT_COEX_DATA"; }; &uart2 { -- 2.40.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators 2023-04-11 18:14 [PATCH v2 0/4] SM8150 Kumano updates Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM Konrad Dybcio @ 2023-04-11 18:14 ` Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 Konrad Dybcio 2023-05-25 4:54 ` [PATCH v2 0/4] SM8150 Kumano updates Bjorn Andersson 4 siblings, 0 replies; 7+ messages in thread From: Konrad Dybcio @ 2023-04-11 18:14 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio Sony - as per usual - used a whole bunch of GPIO-gated fixed voltage regulators for camera sensors on Kumano. Describe them and the corresponding pins. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 110 +++++++++++++++++++++ 1 file changed, 110 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index d1a3ab836019..ad402f3a90c3 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8150.dtsi" #include "pm8150.dtsi" @@ -81,6 +82,66 @@ key-vol-down { }; }; + cam0_vdig_vreg: cam0-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera0_vdig_vreg"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam1_vdig_vreg: cam1-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera1_vdig_vreg"; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&sub_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam2_vdig_vreg: cam2-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera2_vdig_vreg"; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam3_vdig_vreg: cam3-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera3_vdig_vreg"; + gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&supwc_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vmdr_vreg: cam-vmdr-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera_vmdr_vreg"; + gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_vmdr_en>; + pinctrl-names = "default"; + }; + + rgbcir_vreg: rgbcir-regulator { + compatible = "regulator-fixed"; + regulator-name = "rgbcir_vreg"; + gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rgbc_ir_pwr_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -474,6 +535,15 @@ vol_down_n: vol-down-n-state { bias-pull-up; input-enable; }; + + supwc_pwr_en: supwc-pwr-en-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <1>; + power-source = <1>; + drive-push-pull; + output-low; + }; }; &pm8150b_gpios { @@ -520,6 +590,15 @@ &pm8150l_gpios { "NC", /* GPIO_10 */ "NC", "NC"; + + main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { + pins = "gpio3"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; }; &pon_pwrkey { @@ -716,6 +795,37 @@ &tlmm { "WL_CMD_DATA_CHAIN1", "WL_BT_COEX_CLK", "WL_BT_COEX_DATA"; + + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sub_cam_pwr_en: sub-cam-pwr-en-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart2 { -- 2.40.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 2023-04-11 18:14 [PATCH v2 0/4] SM8150 Kumano updates Konrad Dybcio ` (2 preceding siblings ...) 2023-04-11 18:14 ` [PATCH v2 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators Konrad Dybcio @ 2023-04-11 18:14 ` Konrad Dybcio 2023-04-14 7:29 ` Marijn Suijten 2023-05-25 4:54 ` [PATCH v2 0/4] SM8150 Kumano updates Bjorn Andersson 4 siblings, 1 reply; 7+ messages in thread From: Konrad Dybcio @ 2023-04-11 18:14 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski Cc: Marijn Suijten, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio, Konrad Dybcio From: Konrad Dybcio <konrad.dybcio@somainline.org> Set up and enable SDHCI2 to enable the microSD slot on Kumano devices. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index ad402f3a90c3..baafea53770b 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -618,6 +618,17 @@ &qupv3_id_1 { status = "okay"; }; +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <126 4>; gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ -- 2.40.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 2023-04-11 18:14 ` [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 Konrad Dybcio @ 2023-04-14 7:29 ` Marijn Suijten 0 siblings, 0 replies; 7+ messages in thread From: Marijn Suijten @ 2023-04-14 7:29 UTC (permalink / raw) To: Konrad Dybcio Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, devicetree, linux-kernel, Konrad Dybcio On 2023-04-11 20:14:44, Konrad Dybcio wrote: > From: Konrad Dybcio <konrad.dybcio@somainline.org> > > Set up and enable SDHCI2 to enable the microSD slot on Kumano > devices. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Thanks for finally sending this and fixing the no-emmc -> no-emmc property, I've been testing/using this out-of-tree patch for too long: Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi > index ad402f3a90c3..baafea53770b 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi > @@ -618,6 +618,17 @@ &qupv3_id_1 { > status = "okay"; > }; > > +&sdhc_2 { > + vmmc-supply = <&vreg_l9c_2p9>; > + vqmmc-supply = <&vreg_l6c_2p9>; > + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + bus-width = <4>; > + no-sdio; > + no-mmc; > + > + status = "okay"; > +}; > + > &tlmm { > gpio-reserved-ranges = <126 4>; > gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ > > -- > 2.40.0 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/4] SM8150 Kumano updates 2023-04-11 18:14 [PATCH v2 0/4] SM8150 Kumano updates Konrad Dybcio ` (3 preceding siblings ...) 2023-04-11 18:14 ` [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 Konrad Dybcio @ 2023-05-25 4:54 ` Bjorn Andersson 4 siblings, 0 replies; 7+ messages in thread From: Bjorn Andersson @ 2023-05-25 4:54 UTC (permalink / raw) To: Krzysztof Kozlowski, Rob Herring, Andy Gross, Konrad Dybcio Cc: linux-kernel, linux-arm-msm, devicetree, Konrad Dybcio, Marijn Suijten On Tue, 11 Apr 2023 20:14:40 +0200, Konrad Dybcio wrote: > v1 -> v2: > - no-emmc -> no-mmc [4/4] > - drop superfluous input-enable [3/4] > > v1: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v1-0-f1852c2a2378@linaro.org > > Add gpio-line-names, set up fixed camera regulators and enable SDHCI2 > on Xperia 1 / 5. > > [...] Applied, thanks! [1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs commit: 20fd55b2b0acd496cc6d3cb98832fe2438939ac4 [2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM commit: b949d8032fa287633faf895dc3669a7fd6720071 [3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators commit: 7a740ec3045bfa3b476ea94dd2d70bc3ac5d0a0f [4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 commit: 644ab8bb42b596f16d01fb140088afb616f67cd8 Best regards, -- Bjorn Andersson <andersson@kernel.org> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-05-25 4:54 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-04-11 18:14 [PATCH v2 0/4] SM8150 Kumano updates Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 1/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for PMIC GPIOs Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 2/4] arm64: dts: qcom: sm8150-kumano: Add GPIO line names for TLMM Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 3/4] arm64: dts: qcom: sm8150-kumano: Set up camera fixed regulators Konrad Dybcio 2023-04-11 18:14 ` [PATCH v2 4/4] arm64: dts: qcom: sm8150-kumano: Enable SDHCI2 Konrad Dybcio 2023-04-14 7:29 ` Marijn Suijten 2023-05-25 4:54 ` [PATCH v2 0/4] SM8150 Kumano updates Bjorn Andersson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).