From: Tianling Shen <cnsztl@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Peter Geis <pgwipeout@gmail.com>, Andy Yan <andyshrk@163.com>,
Tianling Shen <cnsztl@gmail.com>,
Brian Norris <briannorris@chromium.org>,
Chris Morgan <macromorgan@hotmail.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Andrew Lunn <andrew@lunn.ch>,
Michael Riesch <michael.riesch@wolfvision.net>,
Maya Matuszczyk <maccraft123mc@gmail.com>,
Andrew Powers-Holmes <aholmes@omnom.net>,
Sascha Hauer <s.hauer@pengutronix.de>,
Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/5] arm64: dts: rockchip: Add FriendlyARM NanoPi R5C
Date: Sat, 18 Mar 2023 16:37:43 +0800 [thread overview]
Message-ID: <20230318083745.6181-4-cnsztl@gmail.com> (raw)
In-Reply-To: <20230318083745.6181-1-cnsztl@gmail.com>
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.
Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125)
- HDMI 2.0
- MIPI DSI/CSI
- USB Type C 5V
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3568-nanopi-r5c.dts | 112 ++++++++++++++++++
2 files changed, 113 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ade66d846a20..a315a8117b0f 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
new file mode 100644
index 000000000000..f70ca9f0470a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi R5C";
+ compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&reset_button_pin>;
+
+ button-reset {
+ debounce-interval = <50>;
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
+
+ led-lan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_led: led-power {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-wan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-wlan {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20_reset_pin>;
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pcie3x1 {
+ num-lanes = <1>;
+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pcie3x2 {
+ num-lanes = <1>;
+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ gpio-leds {
+ lan_led_pin: lan-led-pin {
+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ power_led_pin: power-led-pin {
+ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_pin: wan-led-pin {
+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wlan_led_pin: wlan-led-pin {
+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie20_reset_pin: pcie20-reset-pin {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rockchip-key {
+ reset_button_pin: reset-button-pin {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
--
2.40.0
next prev parent reply other threads:[~2023-03-18 8:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-18 8:37 [PATCH v2 0/5] arm64: dts: rockchip: improve support for NanoPi R5 series Tianling Shen
2023-03-18 8:37 ` [PATCH v2 1/5] arm64: dts: rockchip: create common dtsi " Tianling Shen
2023-03-18 8:37 ` [PATCH v2 2/5] dt-bindings: Add doc for FriendlyARM NanoPi R5C Tianling Shen
2023-03-18 8:37 ` Tianling Shen [this message]
2023-03-18 8:37 ` [PATCH v2 4/5] arm64: dts: rockchip: fix gmac support for NanoPi R5S Tianling Shen
2023-03-18 8:37 ` [PATCH v2 5/5] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 series Tianling Shen
2023-03-22 23:40 ` [PATCH v2 0/5] arm64: dts: rockchip: improve support for " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230318083745.6181-4-cnsztl@gmail.com \
--to=cnsztl@gmail.com \
--cc=aholmes@omnom.net \
--cc=anarsoul@gmail.com \
--cc=andrew@lunn.ch \
--cc=andyshrk@163.com \
--cc=briannorris@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@amarulasolutions.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maccraft123mc@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=michael.riesch@wolfvision.net \
--cc=pgwipeout@gmail.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).