devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Tero Kristo <kristo@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Julien Panis <jpanis@baylibre.com>, <bb@ti.com>, <d-gole@ti.com>,
	Nishanth Menon <nm@ti.com>
Subject: [PATCH V3 2/2] arm64: dts: ti: k3-am62: Add watchdog nodes
Date: Mon, 20 Mar 2023 11:51:23 -0500	[thread overview]
Message-ID: <20230320165123.80561-3-nm@ti.com> (raw)
In-Reply-To: <20230320165123.80561-1-nm@ti.com>

From: Julien Panis <jpanis@baylibre.com>

Add nodes for watchdogs :
- 5 in main domain
- 1 in MCU domain
- 1 in wakeup domain

Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since v2:
- s/main_rti4/main_rti15 to matchup with TRM naming convention
- Picked up reviewed by

V2: https://lore.kernel.org/all/20230315170706.1598977-3-nm@ti.com/
V1: https://lore.kernel.org/r/20230311105850.21811-3-nm@ti.com

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi   | 45 ++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi    | 11 ++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 11 ++++++
 3 files changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index a143ea5e78a5..16e14863d7df 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -758,6 +758,51 @@ main_mcan0: can@20701000 {
 		status = "disabled";
 	};
 
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
 	epwm0: pwm@23000000 {
 		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
 		#pwm-cells = <3>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index a427231527c3..076601a41e84 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -130,4 +130,15 @@ mcu_gpio0: gpio@4201000 {
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
 	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index fec81546fbbd..7726ebae2539 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -50,4 +50,15 @@ wkup_rtc0: rtc@2b1f0000 {
 		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
 		wakeup-source;
 	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
 };
-- 
2.40.0


  parent reply	other threads:[~2023-03-20 20:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-20 16:51 [PATCH V3 0/2] arm64: dts: ti: k3-am62: Add watchdog and rtc nodes Nishanth Menon
2023-03-20 16:51 ` [PATCH V3 1/2] arm64: dts: ti: k3-am62-wakeup: Introduce RTC node Nishanth Menon
2023-03-21  4:37   ` Dhruva Gole
2023-03-21 12:59     ` Nishanth Menon
2023-03-20 16:51 ` Nishanth Menon [this message]
2023-03-20 22:58 ` [PATCH V3 0/2] arm64: dts: ti: k3-am62: Add watchdog and rtc nodes Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230320165123.80561-3-nm@ti.com \
    --to=nm@ti.com \
    --cc=bb@ti.com \
    --cc=d-gole@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jpanis@baylibre.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).