[PATCH v3 1/6] dt-bindings: mfd: Add the Lantiq PEF2256 E1/T1/J1 framer

[Herve Codina <herve.codina@bootlin.com>]

The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 .../bindings/mfd/lantiq,pef2256.yaml          | 205 ++++++++++++++++++
 1 file changed, 205 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml

diff --git a/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
new file mode 100644
index 000000000000..affbf20df0a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lantiq,pef2256.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/lantiq,pef2256.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq PEF2256
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and
+  line interface component designed to fulfill all required interfacing between
+  an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.
+
+properties:
+  compatible:
+    items:
+      - const: lantiq,pef2256
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Master clock
+      - description: Receive System Clock
+      - description: Transmit System Clock
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: sclkr
+      - const: sclkx
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO used to reset the device.
+    maxItems: 1
+
+  pinctrl:
+    $ref: /schemas/pinctrl/pinctrl.yaml#
+
+    patternProperties:
+      '-pins$':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml#
+
+        properties:
+          pins:
+            enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ]
+
+          function:
+            enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS,
+                    SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT,
+                    GPI, GPOH, GPOL ]
+
+        additionalProperties: false
+
+        required:
+          - pins
+          - function
+
+    additionalProperties: false
+
+  lantiq,line-interface:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [e1, t1j1]
+    default: e1
+    description: |
+      The line interface type
+        - e1: E1 line
+        - t1j1: T1/J1 line
+
+  lantiq,frame-format:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The line interface frame format.
+
+  lantiq,data-rate-bps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2048000, 4096000, 8192000, 16384000]
+    default: 2048000
+    description:
+      Data rate (bit per seconds) on the system highway.
+
+  lantiq,clock-falling-edge:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data is sent on falling edge of the clock (and received on the rising
+      edge). If 'clock-falling-edge' is not present, data is sent on the
+      rising edge (and received on the falling edge).
+
+  lantiq,channel-phase:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 0
+    description:
+      The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit
+      time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data
+      rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000
+      bit/s, the data (all 32 8bit) present in the frame are interleave with
+      unused time-slots. The lantiq,channel-phase property allows to set the
+      correct alignment of the interleave mechanism.
+      For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and
+      lantiq,channel-phase = 2, the interleave schema with unused time-slots
+      (nu) and used time-slots (XX) for TSi is
+        nu nu XX nu nu nu XX nu nu nu XX nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the
+      interleave schema is
+        nu XX nu nu nu XX nu nu nu XX nu nu
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+      With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and
+      lantiq,channel-phase = 1, the interleave schema is
+        nu    XX    nu    XX    nu    XX
+        <-- TSi --> <- TSi+1 -> <- TSi+2 ->
+
+  lantiq,subordinate:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, the pef2256 works in subordinate mode. In this mode it
+      synchronizes on line interface clock signals. Otherwise, it synchronizes
+      on internal clocks.
+
+patternProperties:
+  '^codec([0-9]|[1-2][0-9]|3[0-1])?$':
+    $ref: /schemas/sound/lantiq,pef2256-codec.yaml
+
+allOf:
+  - if:
+      properties:
+        lantiq,line-interface:
+          contains:
+            const: e1
+    then:
+      properties:
+        lantiq,frame-format:
+          enum: [doubleframe, crc4-multiframe, auto-multiframe]
+          default: doubleframe
+          description: |
+            The E1 line interface frame format
+              - doubleframe: Doubleframe format
+              - crc4-multiframe: CRC4 multiframe format
+              - auto-multiframe: CRC4 multiframe format with interworking
+                                 capabilities (ITU-T G.706 Annex B)
+
+    else:
+      # T1/J1 line
+      properties:
+        lantiq,frame-format:
+          enum: [4frame, 12frame, 24frame, 72frame]
+          default: 12frame
+          description: |
+            The T1/J1 line interface frame format
+              - 4frame: 4-frame multiframe format (F4)
+              - 12frame: 12-frame multiframe format (F12, D3/4)
+              - 24frame: 24-frame multiframe format (ESF)
+              - 72frame: 72-frame multiframe format (F72, remote switch mode)
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    framer@2000000 {
+      compatible = "lantiq,pef2256", "simple-mfd";
+      reg = <0x2000000 0x100>;
+      interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+      interrupt-parent = <&intc>;
+      clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>;
+      clock-names = "mclk", "sclkr", "sclkx";
+      reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+      lantiq,data-rate-bps = <4096000>;
+
+      pinctrl {
+        pef2256_rpa_sypr: rpa-pins {
+          pins = "RPA";
+          function = "SYPR";
+        };
+        pef2256_xpa_sypx: xpa-pins {
+          pins = "XPA";
+          function = "SYPX";
+        };
+      };
+
+      codec {
+        compatible = "lantiq,pef2256-codec";
+        #sound-dai-cells = <0>;
+      };
+    };
-- 
2.39.2