From: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>,
<kernel@axis.com>
Subject: [PATCH v3 0/2] Support for Texas Instruments OPT4001 Ambient Light Sensor
Date: Wed, 26 Apr 2023 13:57:28 +0200 [thread overview]
Message-ID: <20230323-add-opt4001-driver-v3-0-62e121dab294@axis.com> (raw)
This series adds support for Texas Instruments OPT4001 Ambient light sensor.
The light sensor has a i2c interface and supports continuous, oneshot and
interruptdriven measurements and has configurable conversion time and range.
This driver uses the sensors continuous mode so it always has a updated light
value available. The conversion time which is
(integration time + time to set registers) which is used to configure
integration time through sysfs. The chip also has a configurable light
range which this driver sets to Auto where the chip chooses range itself
depending on previously read values.
Since the OPT4001 has different constants used to calculate lux values
depeding on packaging of the chip but uses the same device id, two compatible
string are used depending on the packaging, these are "ti,opt4001-picostar"
and "ti,opt4001-sot-5x3".
Signed-off-by: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
---
Changes in v3:
- Removed unneccesary description from devicetree
- Use correct subject prefix for devicetree bindings
- No error on device id miss match
- Removed opt4001_settings as there was only one needed property int_time
- Link to v2: https://lore.kernel.org/r/20230323-add-opt4001-driver-v2-0-0bae0398669d@axis.com
Changes in v2:
- Added text about differences of sot-5x3 and picostar
- Added irq and regulator to devicetree bindings
- Added regulator support to driver
- Switched from using .remove to devm_action_or_reset
- Removed own mutex and reenabled regmaps
- Updated name in sysfs
- Added i2c_device_id
- Rename package_const to chip_info
- Link to v1: https://lore.kernel.org/r/20230323-add-opt4001-driver-v1-0-1451dcc1bc8a@axis.com
---
Stefan Windfeldt-Prytz (2):
dt-bindings: iio: light: Document TI OPT4001 light sensor
iio: light: Add support for TI OPT4001 light sensor
.../devicetree/bindings/iio/light/ti,opt4001.yaml | 68 +++
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/opt4001.c | 467 +++++++++++++++++++++
4 files changed, 547 insertions(+)
---
base-commit: 60c5238813fdfbe167eb579d58172106916b8db0
change-id: 20230323-add-opt4001-driver-99b9aad69319
Best regards,
--
Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
next reply other threads:[~2023-04-26 11:57 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-26 11:57 Stefan Windfeldt-Prytz [this message]
2023-04-26 11:57 ` [PATCH v3 1/2] dt-bindings: iio: light: Document TI OPT4001 light sensor Stefan Windfeldt-Prytz
2023-04-27 16:42 ` Rob Herring
2023-04-26 11:57 ` [PATCH v3 2/2] iio: light: Add support for " Stefan Windfeldt-Prytz
2023-04-30 17:28 ` [PATCH v3 0/2] Support for Texas Instruments OPT4001 Ambient Light Sensor Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230323-add-opt4001-driver-v3-0-62e121dab294@axis.com \
--to=stefan.windfeldt-prytz@axis.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kernel@axis.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).