From: Jacky Huang <ychuang570808@gmail.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
lee@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
p.zabel@pengutronix.de, gregkh@linuxfoundation.org,
jirislaby@kernel.org
Cc: devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
arnd@arndb.de, schung@nuvoton.com, mjchen@nuvoton.com,
Jacky Huang <ychuang3@nuvoton.com>
Subject: [PATCH v6 10/12] reset: Add Nuvoton ma35d1 reset driver support
Date: Tue, 28 Mar 2023 02:19:10 +0000 [thread overview]
Message-ID: <20230328021912.177301-11-ychuang570808@gmail.com> (raw)
In-Reply-To: <20230328021912.177301-1-ychuang570808@gmail.com>
From: Jacky Huang <ychuang3@nuvoton.com>
This driver supports individual IP reset for ma35d1. The reset
control registers is a subset of system control registers.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
---
drivers/reset/Kconfig | 6 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-ma35d1.c | 152 +++++++++++++++++++++++++++++++++++
3 files changed, 159 insertions(+)
create mode 100644 drivers/reset/reset-ma35d1.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 2a52c990d4fe..58477c6ca9b8 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -143,6 +143,12 @@ config RESET_NPCM
This enables the reset controller driver for Nuvoton NPCM
BMC SoCs.
+config RESET_NUVOTON_MA35D1
+ bool "Nuvton MA35D1 Reset Driver"
+ default ARCH_NUVOTON || COMPILE_TEST
+ help
+ This enables the reset controller driver for Nuvoton MA35D1 SoC.
+
config RESET_OXNAS
bool
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 3e7e5fd633a8..fd52dcf66a99 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
+obj-$(CONFIG_RESET_NUVOTON_MA35D1) += reset-ma35d1.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_POLARFIRE_SOC) += reset-mpfs.o
diff --git a/drivers/reset/reset-ma35d1.c b/drivers/reset/reset-ma35d1.c
new file mode 100644
index 000000000000..221299e7b873
--- /dev/null
+++ b/drivers/reset/reset-ma35d1.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Chi-Fang Li <cfli0@nuvoton.com>
+ */
+
+#include <linux/device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+#define REG_SYS_IPRST0 0x020
+#define REG_SYS_IPRST1 0x024
+#define REG_SYS_IPRST2 0x028
+#define REG_SYS_IPRST3 0x02C
+
+#define RST_PRE_REG 32
+
+struct ma35d1_reset_data {
+ struct reset_controller_dev rcdev;
+ struct regmap *regmap;
+};
+
+struct ma35d1_reboot_data {
+ struct notifier_block restart_handler;
+ struct regmap *regmap;
+};
+
+static int ma35d1_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct ma35d1_reboot_data *data =
+ container_of(this, struct ma35d1_reboot_data,
+ restart_handler);
+ return regmap_write(data->regmap, REG_SYS_IPRST0, 1 << MA35D1_RESET_CHIP);
+}
+
+static int ma35d1_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ unsigned int reg;
+ int ret;
+ int offset = (id / RST_PRE_REG) * 4;
+ struct ma35d1_reset_data *data =
+ container_of(rcdev, struct ma35d1_reset_data, rcdev);
+
+ ret = regmap_read(data->regmap, REG_SYS_IPRST0 + offset, ®);
+ if (ret < 0)
+ return ret;
+ if (assert)
+ reg |= 1 << (id % RST_PRE_REG);
+ else
+ reg &= ~(1 << (id % RST_PRE_REG));
+
+ return regmap_write(data->regmap, REG_SYS_IPRST0 + offset, reg);
+}
+
+static int ma35d1_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return ma35d1_reset_update(rcdev, id, true);
+}
+
+static int ma35d1_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return ma35d1_reset_update(rcdev, id, false);
+}
+
+static int ma35d1_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int reg, ret;
+ int offset = id / RST_PRE_REG;
+ struct ma35d1_reset_data *data =
+ container_of(rcdev, struct ma35d1_reset_data, rcdev);
+
+ ret = regmap_read(data->regmap, REG_SYS_IPRST0 + offset, ®);
+ if (ret < 0)
+ return ret;
+ return !!(reg & BIT(id % RST_PRE_REG));
+}
+
+static const struct reset_control_ops ma35d1_reset_ops = {
+ .assert = ma35d1_reset_assert,
+ .deassert = ma35d1_reset_deassert,
+ .status = ma35d1_reset_status,
+};
+
+static const struct of_device_id ma35d1_reset_dt_ids[] = {
+ { .compatible = "nuvoton,ma35d1-reset" },
+ { },
+};
+
+static int ma35d1_reset_probe(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+ struct device_node *parent;
+ struct ma35d1_reset_data *reset_data;
+ struct ma35d1_reboot_data *reboot_data;
+
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "Device tree node not found\n");
+ return -EINVAL;
+ }
+
+ reset_data = devm_kzalloc(dev, sizeof(*reset_data), GFP_KERNEL);
+ if (!reset_data)
+ return -ENOMEM;
+
+ reboot_data = devm_kzalloc(dev, sizeof(*reboot_data), GFP_KERNEL);
+ if (!reboot_data)
+ return -ENOMEM;
+
+ parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+ reset_data->regmap = syscon_node_to_regmap(parent);
+ of_node_put(parent);
+ if (IS_ERR(reset_data->regmap)) {
+ dev_err(&pdev->dev, "Failed to get SYS register base\n");
+ return PTR_ERR(reset_data->regmap);
+ }
+
+ reset_data->rcdev.owner = THIS_MODULE;
+ reset_data->rcdev.nr_resets = MA35D1_RESET_COUNT;
+ reset_data->rcdev.ops = &ma35d1_reset_ops;
+ reset_data->rcdev.of_node = dev->of_node;
+
+ reboot_data->regmap = reset_data->regmap;
+ reboot_data->restart_handler.notifier_call = ma35d1_restart_handler;
+ reboot_data->restart_handler.priority = 192;
+
+ err = register_restart_handler(&reboot_data->restart_handler);
+ if (err)
+ dev_warn(&pdev->dev, "failed to register restart handler\n");
+
+ return devm_reset_controller_register(dev, &reset_data->rcdev);
+}
+
+static struct platform_driver ma35d1_reset_driver = {
+ .probe = ma35d1_reset_probe,
+ .driver = {
+ .name = "ma35d1-reset",
+ .of_match_table = ma35d1_reset_dt_ids,
+ },
+};
+
+builtin_platform_driver(ma35d1_reset_driver);
--
2.34.1
next prev parent reply other threads:[~2023-03-28 2:20 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 2:19 [PATCH v6 00/12] Introduce Nuvoton ma35d1 SoC Jacky Huang
2023-03-28 2:19 ` [PATCH v6 01/12] arm64: Kconfig.platforms: Add config for Nuvoton MA35 platform Jacky Huang
2023-03-28 2:19 ` [PATCH v6 02/12] arm64: defconfig: Add support for Nuvoton MA35 family SoCs Jacky Huang
2023-03-28 2:19 ` [PATCH v6 03/12] dt-bindings: clock: nuvoton: add binding for ma35d1 clock controller Jacky Huang
2023-03-29 8:14 ` Krzysztof Kozlowski
2023-03-28 2:19 ` [PATCH v6 04/12] dt-bindings: reset: nuvoton: add binding for ma35d1 IP reset control Jacky Huang
2023-03-28 17:48 ` Stephen Boyd
2023-03-29 8:53 ` Jacky Huang
2023-03-29 8:17 ` Krzysztof Kozlowski
2023-03-29 9:12 ` Jacky Huang
2023-03-29 9:27 ` Krzysztof Kozlowski
2023-03-29 9:33 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 05/12] dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible Jacky Huang
2023-04-05 15:27 ` Lee Jones
2023-03-28 2:19 ` [PATCH v6 06/12] dt-bindings: arm: Add initial bindings for Nuvoton platform Jacky Huang
2023-03-28 15:41 ` kernel test robot
2023-03-29 8:19 ` Krzysztof Kozlowski
2023-03-29 8:32 ` Jacky Huang
2023-03-29 13:07 ` Rob Herring
2023-03-30 10:41 ` Jacky Huang
2023-03-30 13:25 ` Krzysztof Kozlowski
2023-03-31 2:15 ` Jacky Huang
2023-04-03 20:33 ` Rob Herring
2023-04-06 2:09 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 07/12] dt-bindings: serial: Document ma35d1 uart controller Jacky Huang
2023-03-29 8:20 ` Krzysztof Kozlowski
2023-03-29 8:44 ` Jacky Huang
2023-03-30 7:33 ` Krzysztof Kozlowski
2023-03-30 10:52 ` Jacky Huang
2023-03-30 13:12 ` Rob Herring
2023-03-31 2:03 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 08/12] arm64: dts: nuvoton: Add initial ma35d1 device tree Jacky Huang
2023-03-28 17:57 ` Stephen Boyd
2023-03-29 2:03 ` Jacky Huang
2023-03-29 2:19 ` Stephen Boyd
2023-03-29 2:39 ` Jacky Huang
2023-03-29 2:46 ` Stephen Boyd
2023-03-29 3:13 ` Jacky Huang
2023-03-29 3:25 ` Stephen Boyd
2023-03-29 3:43 ` Jacky Huang
2023-03-29 3:54 ` Stephen Boyd
2023-03-29 6:02 ` Jacky Huang
2023-03-29 17:52 ` Stephen Boyd
2023-03-29 8:21 ` Krzysztof Kozlowski
2023-03-29 8:36 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 09/12] clk: nuvoton: Add clock driver for ma35d1 clock controller Jacky Huang
2023-03-28 18:18 ` Stephen Boyd
2023-03-30 10:36 ` Jacky Huang
2023-03-28 2:19 ` Jacky Huang [this message]
2023-04-24 20:02 ` [PATCH v6 10/12] reset: Add Nuvoton ma35d1 reset driver support Philipp Zabel
2023-04-25 1:22 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 11/12] tty: serial: Add Nuvoton ma35d1 serial " Jacky Huang
2023-03-28 9:23 ` Jiri Slaby
2023-03-29 8:06 ` Jacky Huang
2023-03-31 0:29 ` kernel test robot
2023-03-28 2:19 ` [PATCH v6 12/12] MAINTAINERS: Add entry for NUVOTON MA35 Jacky Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230328021912.177301-11-ychuang570808@gmail.com \
--to=ychuang570808@gmail.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mjchen@nuvoton.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).