From: <patrice.chotard@foss.st.com>
To: <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<alexandre.torgue@foss.st.com>
Cc: <linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
Patrice Chotard <patrice.chotard@foss.st.com>
Subject: [PATCH] ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family
Date: Fri, 31 Mar 2023 09:19:07 +0200 [thread overview]
Message-ID: <20230331071907.4127388-1-patrice.chotard@foss.st.com> (raw)
From: Patrice Chotard <patrice.chotard@foss.st.com>
Add QSPI support on STM32MP13x SoC family
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
---
arch/arm/boot/dts/stm32mp131.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 5949473cbbfd..544c755b6e67 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -1137,6 +1137,21 @@ mdma: dma-controller@58000000 {
dma-requests = <48>;
};
+ qspi: spi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ reg-names = "qspi", "qspi_mm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+ <&mdma 26 0x2 0x10100008 0x0 0x0>;
+ dma-names = "tx", "rx";
+ clocks = <&rcc QSPI_K>;
+ resets = <&rcc QSPI_R>;
+ status = "disabled";
+ };
+
sdmmc1: mmc@58005000 {
compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x20253180>;
--
2.25.1
next reply other threads:[~2023-03-31 7:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-31 7:19 patrice.chotard [this message]
2023-04-03 9:23 ` [PATCH] ARM: dts: stm32: Add QSPI support on STM32MP13x SoC family Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230331071907.4127388-1-patrice.chotard@foss.st.com \
--to=patrice.chotard@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).