From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Avri Altman <avri.altman@wdc.com>,
Bart Van Assche <bvanassche@acm.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-scsi@vger.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
Date: Fri, 31 Mar 2023 21:59:18 +0200 [thread overview]
Message-ID: <20230331195920.582620-4-brgl@bgdev.pl> (raw)
In-Reply-To: <20230331195920.582620-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add QMP PHY config for sa8775p and add support for the new compatible.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 +++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 994ddd5d4a81..126bd47c3fa0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -823,6 +823,41 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
+
+static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
+ .lanes = 2,
+
+ .offsets = &qmp_ufs_offsets,
+
+ .tbls = {
+ .serdes = sm8350_ufsphy_serdes,
+ .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes),
+ .tx = sm8350_ufsphy_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx),
+ .rx = sm8350_ufsphy_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx),
+ .pcs = sm8350_ufsphy_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs),
+ },
+ .tbls_hs_b = {
+ .serdes = sm8350_ufsphy_hs_b_serdes,
+ .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
+ },
+ .tbls_hs_g4 = {
+ .tx = sm8350_ufsphy_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+ .rx = sm8350_ufsphy_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+ .pcs = sm8350_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+ },
+ .clk_list = sm8450_ufs_phy_clk_l,
+ .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = ufsphy_v5_regs_layout,
+};
+
static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
.lanes = 2,
@@ -1542,6 +1577,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
}, {
.compatible = "qcom,msm8998-qmp-ufs-phy",
.data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,sa8775p-qmp-ufs-phy",
+ .data = &sa8775p_ufsphy_cfg,
}, {
.compatible = "qcom,sc8180x-qmp-ufs-phy",
.data = &sm8150_ufsphy_cfg,
--
2.37.2
next prev parent reply other threads:[~2023-03-31 19:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-31 19:59 [PATCH 0/5] arm64: qcom: sa8775p: add support for UFS Bartosz Golaszewski
2023-03-31 19:59 ` [PATCH 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p Bartosz Golaszewski
2023-04-01 19:23 ` Krzysztof Kozlowski
2023-03-31 19:59 ` [PATCH 2/5] dt-bindings: phy: qmp-ufs: describe the UFS PHY " Bartosz Golaszewski
2023-04-01 19:25 ` Krzysztof Kozlowski
2023-03-31 19:59 ` Bartosz Golaszewski [this message]
2023-03-31 19:59 ` [PATCH 4/5] arm64: dts: qcom: sa8775p: add UFS nodes Bartosz Golaszewski
2023-04-04 18:38 ` Konrad Dybcio
2023-03-31 19:59 ` [PATCH 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS Bartosz Golaszewski
2023-04-04 18:38 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230331195920.582620-4-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=agross@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=andersson@kernel.org \
--cc=avri.altman@wdc.com \
--cc=bartosz.golaszewski@linaro.org \
--cc=bvanassche@acm.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).