[PATCH v2 11/22] arm64: dts: qcom: sc8280xp*: use pmk8350.dtsi

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Employ PMIC_LABEL and switch sc8280xp-pmics to use pmk8350.dtsi in order
to reduce duplication and possible discrepancies.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 67 ++------------------
 1 file changed, 4 insertions(+), 63 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 254337345e45..6c183b6c9207 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -51,70 +51,11 @@ trip1 {
 	};
 };
 
-&spmi_bus {
-	pmk8280: pmic@0 {
-		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmk8280_pon: pon@1300 {
-			compatible = "qcom,pmk8350-pon";
-			reg = <0x1300>, <0x800>;
-
-			pmk8280_pon_pwrkey: pwrkey {
-				compatible = "qcom,pmk8350-pwrkey";
-				interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
-				linux,code = <KEY_POWER>;
-				status = "disabled";
-			};
-
-			pmk8280_pon_resin: resin {
-				compatible = "qcom,pmk8350-resin";
-				interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
-				status = "disabled";
-			};
-		};
-
-		pmk8280_vadc: adc@3100 {
-			compatible = "qcom,spmi-adc7";
-			reg = <0x3100>;
-			interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-			status = "disabled";
-		};
-
-		pmk8280_adc_tm: adc-tm@3400 {
-			compatible = "qcom,spmi-adc-tm5-gen2";
-			reg = <0x3400>;
-			interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#thermal-sensor-cells = <1>;
-			status = "disabled";
-		};
-
-		pmk8280_rtc: rtc@6100 {
-			compatible = "qcom,pmk8350-rtc";
-			reg = <0x6100>, <0x6200>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
-			wakeup-source;
-			status = "disabled";
-		};
-
-		pmk8280_sdam_6: nvram@8500 {
-			compatible = "qcom,spmi-sdam";
-			reg = <0x8500>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x8500 0x100>;
-			status = "disabled";
-		};
-	};
+/* SID 0 */
+#define PMIC_LABEL pmk8280
+#include "pmk8350.dtsi"
 
+&spmi_bus {
 	pmc8280_1: pmic@1 {
 		compatible = "qcom,pm8350", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
-- 
2.30.2