devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Om Parikh <hack3r-0m@proton.me>
To: daniel.baluta@nxp.com
Cc: hack3r-0m@proton.me, Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Oleksij Rempel <linux@rempel-privat.de>,
	Olof Johansson <olof@lixom.net>,
	linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
Date: Mon, 03 Apr 2023 00:42:35 +0000	[thread overview]
Message-ID: <20230403004138.326482-1-hack3r-0m@proton.me> (raw)

this patch replaces the txt file and adds YAML bindings file
adhering to the json-schema for alphascale-asm9260. It is a
demo patch for potential further contributions to the GSOC
project.

(see: https://wiki.linuxfoundation.org/gsoc/2023-gsoc-device-tree-bindings)

Signed-off-by: Om Parikh <hack3r-0m@proton.me>
---
 .../watchdog/alphascale,asm9260-wdt.yaml      | 76 +++++++++++++++++++
 .../bindings/watchdog/alphascale-asm9260.txt  | 35 ---------
 2 files changed, 76 insertions(+), 35 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt

diff --git a/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
new file mode 100644
index 000000000000..1f7baaf6b0f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/alphascale,asm9260-wdt.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/alphascale,asm9260-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alphascale asm9260 Watchdog timer
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Oleksij Rempel <linux@rempel-privat.de>
+  - Olof Johansson <olof@lixom.net>
+
+properties:
+  compatible:
+    enum:
+      - alphascale,asm9260
+      - alphascale,asm9260devkit
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: source clock, used for tick counter
+      - description: ahb gate
+
+  clock-names:
+    items:
+      - const: mod
+      - const: ahb
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: phandle pointing to the system reset controller with line
+                     index for the watchdog.
+
+  reset-names:
+    items:
+      - const: wdt_rst
+
+  timeout-sec: true
+
+  alphascale,mode:
+    description: to specify the reset mode of operation
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hw, sw, debug]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/alphascale,asm9260.h>
+    watchdog0: watchdog@80048000 {
+      compatible = "alphascale,asm9260-wdt";
+      reg = <0x80048000 0x10>;
+      clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
+      clock-names = "mod", "ahb";
+      interrupts = <55>;
+      timeout-sec = <30>;
+      alphascale,mode = "hw";
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt b/Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt
deleted file mode 100644
index 75b265a04047..000000000000
--- a/Documentation/devicetree/bindings/watchdog/alphascale-asm9260.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Alphascale asm9260 Watchdog timer
-
-Required properties:
-
-- compatible : should be "alphascale,asm9260-wdt".
-- reg : Specifies base physical address and size of the registers.
-- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
-- clock-names : should be set to
-	"mod" - source for tick counter.
-	"ahb" - ahb gate.
-- resets : phandle pointing to the system reset controller with
-	line index for the watchdog.
-- reset-names : should be set to "wdt_rst".
-
-Optional properties:
-- timeout-sec : shall contain the default watchdog timeout in seconds,
-	if unset, the default timeout is 30 seconds.
-- alphascale,mode : three modes are supported
-	"hw" - hw reset (default).
-	"sw" - sw reset.
-	"debug" - no action is taken.
-
-Example:
-
-watchdog0: watchdog@80048000 {
-	compatible = "alphascale,asm9260-wdt";
-	reg = <0x80048000 0x10>;
-	clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
-	clock-names = "mod", "ahb";
-	interrupts = <55>;
-	resets = <&rst WDT_RESET>;
-	reset-names = "wdt_rst";
-	timeout-sec = <30>;
-	alphascale,mode = "hw";
-};
-- 
2.40.0



             reply	other threads:[~2023-04-03  0:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-03  0:42 Om Parikh [this message]
2023-04-03  9:31 ` [PATCH] dt-bindings: watchdog: alphascale-asm9260: convert to DT schema Krzysztof Kozlowski
2023-04-03 13:10 ` Rob Herring
2023-04-04  2:21 ` Om Parikh
2023-04-04  2:32   ` hack3r-0m
2023-04-04  5:48     ` Krzysztof Kozlowski
2023-04-04  5:49   ` Krzysztof Kozlowski
2023-04-06 16:03   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230403004138.326482-1-hack3r-0m@proton.me \
    --to=hack3r-0m@proton.me \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=linux@roeck-us.net \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).