From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: "Marek Vasut" <marex@denx.de>, "Abel Vesa" <abel.vesa@nxp.com>,
"Dong Aisheng" <aisheng.dong@nxp.com>,
"Fabio Estevam" <festevam@gmail.com>,
"Guido Günther" <agx@sigxcpu.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lucas Stach" <l.stach@pengutronix.de>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Richard Cochran" <richardcochran@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Shawn Guo" <shawnguo@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: imx8mn: Add display pipeline components
Date: Mon, 3 Apr 2023 21:27:03 +0200 [thread overview]
Message-ID: <20230403192703.243929-1-marex@denx.de> (raw)
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Nano.
This makes the DSI display pipeline available on this SoC.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abel.vesa@nxp.com>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 57 +++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 7b58660d9ef49..6426f04bfb101 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1062,6 +1062,63 @@ aips4: bus@32c00000 {
#size-cells = <1>;
ranges;
+ lcdif: lcdif@32e00000 {
+ compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif";
+ reg = <0x32e00000 0x10000>;
+ clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+ <&clk IMX8MN_CLK_DISP_AXI>,
+ <&clk IMX8MN_CLK_DISP_APB>;
+ assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>,
+ <&clk IMX8MN_SYS_PLL2_1000M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
+ status = "disabled";
+
+ port {
+ lcdif_to_dsim: endpoint {
+ remote-endpoint = <&dsim_from_lcdif>;
+ };
+ };
+ };
+
+ mipi_dsi: dsi@32e10000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+ reg = <0x32e10000 0x400>;
+ clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+ <&clk IMX8MN_CLK_DSI_PHY_REF>;
+ clock-names = "bus_clk", "sclk_mipi";
+ assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+ <&clk IMX8MN_CLK_DSI_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+ <&clk IMX8MN_CLK_24M>;
+ assigned-clock-rates = <266000000>, <24000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsim_from_lcdif: endpoint {
+ remote-endpoint = <&lcdif_to_dsim>;
+ };
+ };
+ };
+ };
+
disp_blk_ctrl: blk-ctrl@32e28000 {
compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
reg = <0x32e28000 0x100>;
--
2.39.2
reply other threads:[~2023-04-03 19:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230403192703.243929-1-marex@denx.de \
--to=marex@denx.de \
--cc=abel.vesa@nxp.com \
--cc=agx@sigxcpu.org \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).