[PATCH v1 2/4] arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board

[Andrejs Cainikovs <andrejs.cainikovs@gmail.com>]

From: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>

Each carrier board device tree except the eval board one already override
iomuxc pinctrl property to configure unused pins as gpio.
So move also the pinctrl property to eval board device tree.
Leave the pin group definition in imx8x-colibri.dtsi to avoid duplication
and simplify configuration of gpio.

Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi | 6 ++++++
 arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi         | 4 ----
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index 7264d784ae72..9af769ab8ceb 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -33,6 +33,12 @@ rtc_i2c: rtc@68 {
 	};
 };
 
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_lpspi2_cs2>;
+};
+
 /* Colibri SPI */
 &lpspi2 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index 6f88c11f16e1..b0d6f632622c 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -363,10 +363,6 @@ &usdhc2 {
 /* TODO VPU Encoder/Decoder */
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
-		    <&pinctrl_lpspi2_cs2>;
-
 	/* On-module touch pen-down interrupt */
 	pinctrl_ad7879_int: ad7879intgrp {
 		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21>;
-- 
2.34.1