Re: [RESEND v2 0/6] Add JH7110 AON PMU support

[Conor Dooley <conor.dooley@microchip.com>]

[-- Attachment #1: Type: text/plain, Size: 2303 bytes --]

On Tue, Apr 18, 2023 at 08:56:40PM -0700, Changhuang Liang wrote:
> This patchset adds aon power domain driver for the StarFive JH7110 SoC.
> It is used to turn on/off dphy rx/tx power switch. The series has been
> tested on the VisionFive 2 board.
> 
> This patchset should be applied after the patchset [1]:
> [1] https://lore.kernel.org/all/20230414024157.53203-1-xingyu.wu@starfivetech.com/
> 
> changes since v1:
> - Updated commit message.
> - Changed "starfive,jh7110-pmu-dphy" to "starfive,jh7110-aon-pmu".
> - Put if condition under allOf in .yaml file.
> - Updated spelling error.
> - Dropped patch 4: Add pmu type operation.
> - Changed "jh71xx_pmu_general_set_state" to "jh7110_pmu_set_state" and moved it in call back.
> - Changed "jh7110_pmu_general_parse_dt" to "jh7110_pmu_parse_dt" and moved it in call back.
> - Used pmu_status save the pmu status offset.
> - Changed "JH71XX_PMU_DPHY_SWITCH" to "JH71XX_AON_PMU_SWITCH"
> - Changed copyright to "2022-2023"

For the future, when you resend, please say why you did.

> 
> v1: https://lore.kernel.org/all/20230411064743.273388-1-changhuang.liang@starfivetech.com/
> 
> Changhuang Liang (6):
>   dt-bindings: power: Add JH7110 AON PMU support
>   soc: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
>   soc: starfive: Modify ioremap to regmap
>   soc: starfive: Extract JH7110 pmu private operations
>   soc: starfive: Add JH7110 AON PMU support
>   riscv: dts: starfive: jh7110: Add AON PMU node
> 
>  .../bindings/power/starfive,jh7110-pmu.yaml   |  15 +-
>  MAINTAINERS                                   |   1 +
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |   5 +
>  drivers/soc/starfive/Kconfig                  |   4 +-
>  drivers/soc/starfive/jh71xx_pmu.c             | 200 +++++++++++++-----
>  .../dt-bindings/power/starfive,jh7110-pmu.h   |   3 +
>  6 files changed, 174 insertions(+), 54 deletions(-)
> 
> 
> base-commit: 197b6b60ae7bc51dd0814953c562833143b292aa
> prerequisite-patch-id: 388b8adbb0fe2daf4d07a21eafd4f1bd50ce2403

Also, all of this pre-req patch id stuff is pretty useless. You've
already pointed out the patches that this is based on, so IMO this
information isn't helpful & is probably more likely confuse tooling
than anything else.

Cheers,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]