From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Conor Dooley <conor@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: Walker Chen <walker.chen@starfivetech.com>,
Changhuang Liang <changhuang.liang@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-riscv@lists.infradead.org>
Subject: [PATCH v2 0/6] Add JH7110 AON PMU support
Date: Tue, 18 Apr 2023 20:48:26 -0700 [thread overview]
Message-ID: <20230419034833.43243-1-changhuang.liang@starfivetech.com> (raw)
This patchset adds aon power domain driver for the StarFive JH7110 SoC.
It is used to turn on/off dphy rx/tx power switch. The series has been
tested on the VisionFive 2 board.
This patchset should be applied after the patchset [1]:
[1] https://lore.kernel.org/all/20230414024157.53203-1-xingyu.wu@starfivetech.com/
changes since v1:
- Updated commit message.
- Changed "starfive,jh7110-pmu-dphy" to "starfive,jh7110-aon-pmu".
- Put if condition under allOf in .yaml file.
- Updated spelling error.
- Dropped patch 4: Add pmu type operation.
- Changed "jh71xx_pmu_general_set_state" to "jh7110_pmu_set_state" and moved it in call back.
- Changed "jh7110_pmu_general_parse_dt" to "jh7110_pmu_parse_dt" and moved it in call back.
- Used pmu_status save the pmu status offset.
- Changed "JH71XX_PMU_DPHY_SWITCH" to "JH71XX_AON_PMU_SWITCH"
- Changed copyright to "2022-2023"
v1: https://lore.kernel.org/all/20230411064743.273388-1-changhuang.liang@starfivetech.com/
Changhuang Liang (6):
dt-bindings: power: Add JH7110 AON PMU support
soc: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
soc: starfive: Modify ioremap to regmap
soc: starfive: Extract JH7110 pmu private operations
soc: starfive: Add JH7110 AON PMU support
riscv: dts: starfive: jh7110: Add AON PMU node
.../bindings/power/starfive,jh7110-pmu.yaml | 15 +-
MAINTAINERS | 1 +
arch/riscv/boot/dts/starfive/jh7110.dtsi | 5 +
drivers/soc/starfive/Kconfig | 4 +-
drivers/soc/starfive/jh71xx_pmu.c | 200 +++++++++++++-----
.../dt-bindings/power/starfive,jh7110-pmu.h | 3 +
6 files changed, 174 insertions(+), 54 deletions(-)
base-commit: 197b6b60ae7bc51dd0814953c562833143b292aa
prerequisite-patch-id: 388b8adbb0fe2daf4d07a21eafd4f1bd50ce2403
prerequisite-patch-id: 1117ecaa40a353c667b71802ab34ecf9568d8bb2
prerequisite-patch-id: b00c6b21fbd0353d88b7c9b09093ba30b765f45b
prerequisite-patch-id: 08ec9027e8a5c6fdf201726833168c7464a9b94d
prerequisite-patch-id: fb5120248e48fe1faf053ae0b490c92507ec2b44
prerequisite-patch-id: 4b93d8d590b0a2abe7b4be5287232c494c35be4a
prerequisite-patch-id: 89f049f951e5acf75aab92541992f816fd0acc0d
prerequisite-patch-id: c09c4c68af017b8e5c97b515cb50b70c18a2e705
prerequisite-patch-id: 0df8ccb0e848c2df4c2da95026494bebecede92d
prerequisite-patch-id: 315303931e4b6499de7127a88113763f86e97e16
prerequisite-patch-id: 40cb8212ddb024c20593f73d8b87d9894877e172
prerequisite-patch-id: a1673a9e9f19d6fab5a51abb721e54e36636f067
prerequisite-patch-id: d57cc467fb036241b9276320ff076c4a30d376d6
prerequisite-patch-id: 6e563d68bc5dbf951d4ced17897f9cc4d56169fe
prerequisite-patch-id: 61ec2caa21fd0fc60e57977f7d16d3f72b135745
prerequisite-patch-id: 1387a7e87b446329dfc21f3e575ceae7ebcf954c
prerequisite-patch-id: 258ea5f9b8bf41b6981345dcc81795f25865d38f
prerequisite-patch-id: 8b6f2c9660c0ac0ee4e73e4c21aca8e6b75e81b9
prerequisite-patch-id: dbb0c0151b8bdf093e6ce79fd2fe3f60791a6e0b
prerequisite-patch-id: 9007c8610fdcd387592475949864edde874c20a2
prerequisite-patch-id: d57e95d31686772abc4c4d5aa1cadc344dc293cd
prerequisite-patch-id: 0a0ac5a8a90655b415f6b62e324f3db083cdaaee
prerequisite-patch-id: c9bb2bf387954769731a627a195a2e957506d7c0
prerequisite-patch-id: 3b13e6bd0cb1fede74841bada2a50d30c8049198
prerequisite-patch-id: 3dc2fe994cb83e5bd1faac17b9e40e4d9adf9863
prerequisite-patch-id: 4c4d536c34d6cb607d4d00d4c982175d217832be
prerequisite-patch-id: dd12678b9cdcd6dccdb900c45fe1f6ce11d67fd5
prerequisite-patch-id: 284b5d1b95c6d68bca08db1e82ed14930c98b777
prerequisite-patch-id: 2c2daec388f036ebc8decfaeaa216d979d792c58
--
2.25.1
next reply other threads:[~2023-04-19 3:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-19 3:48 Changhuang Liang [this message]
2023-04-19 3:48 ` [PATCH v2 1/6] dt-bindings: power: Add JH7110 AON PMU support Changhuang Liang
2023-04-19 18:00 ` Krzysztof Kozlowski
2023-04-19 3:48 ` [PATCH v2 2/6] soc: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Changhuang Liang
2023-04-19 3:48 ` [PATCH v2 3/6] soc: starfive: Modify ioremap to regmap Changhuang Liang
2023-04-19 3:48 ` [PATCH v2 4/6] soc: starfive: Extract JH7110 pmu private operations Changhuang Liang
2023-04-19 3:48 ` [PATCH v2 5/6] soc: starfive: Add JH7110 AON PMU support Changhuang Liang
2023-04-19 3:48 ` [PATCH v2 6/6] riscv: dts: starfive: jh7110: Add AON PMU node Changhuang Liang
2023-04-19 3:48 ` [PATCH v2 6/6] riscv: dts: starfive: jh7110: Add starfive,jh7110-aon-pmu node Changhuang Liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230419034833.43243-1-changhuang.liang@starfivetech.com \
--to=changhuang.liang@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hal.feng@starfivetech.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=walker.chen@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).