devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Walker Chen <walker.chen@starfivetech.com>,
	Changhuang Liang <changhuang.liang@starfivetech.com>,
	Hal Feng <hal.feng@starfivetech.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-riscv@lists.infradead.org>
Subject: [PATCH v2 4/6] soc: starfive: Extract JH7110 pmu private operations
Date: Tue, 18 Apr 2023 20:48:30 -0700	[thread overview]
Message-ID: <20230419034833.43243-5-changhuang.liang@starfivetech.com> (raw)
In-Reply-To: <20230419034833.43243-1-changhuang.liang@starfivetech.com>

Move JH7110 private operation into private data of compatible.
Convenient to expand different compatible.

Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
---
 drivers/soc/starfive/jh71xx_pmu.c | 98 +++++++++++++++++++++----------
 1 file changed, 67 insertions(+), 31 deletions(-)

diff --git a/drivers/soc/starfive/jh71xx_pmu.c b/drivers/soc/starfive/jh71xx_pmu.c
index 306218c83691..bb44cc93e822 100644
--- a/drivers/soc/starfive/jh71xx_pmu.c
+++ b/drivers/soc/starfive/jh71xx_pmu.c
@@ -51,9 +51,17 @@ struct jh71xx_domain_info {
 	u8 bit;
 };
 
+struct jh71xx_pmu;
+struct jh71xx_pmu_dev;
+
 struct jh71xx_pmu_match_data {
 	const struct jh71xx_domain_info *domain_info;
 	int num_domains;
+	unsigned int pmu_status;
+	int (*pmu_parse_dt)(struct platform_device *pdev,
+			    struct jh71xx_pmu *pmu);
+	int (*pmu_set_state)(struct jh71xx_pmu_dev *pmd,
+			     u32 mask, bool on);
 };
 
 struct jh71xx_pmu {
@@ -80,14 +88,14 @@ static int jh71xx_pmu_get_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool *is_o
 	if (!mask)
 		return -EINVAL;
 
-	regmap_read(pmu->base, JH71XX_PMU_CURR_POWER_MODE, &val);
+	regmap_read(pmu->base, pmu->match_data->pmu_status, &val);
 
 	*is_on = val & mask;
 
 	return 0;
 }
 
-static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
+static int jh7110_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
 {
 	struct jh71xx_pmu *pmu = pmd->pmu;
 	unsigned long flags;
@@ -95,22 +103,8 @@ static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
 	u32 mode;
 	u32 encourage_lo;
 	u32 encourage_hi;
-	bool is_on;
 	int ret;
 
-	ret = jh71xx_pmu_get_state(pmd, mask, &is_on);
-	if (ret) {
-		dev_dbg(pmu->dev, "unable to get current state for %s\n",
-			pmd->genpd.name);
-		return ret;
-	}
-
-	if (is_on == on) {
-		dev_dbg(pmu->dev, "pm domain [%s] is already %sable status.\n",
-			pmd->genpd.name, on ? "en" : "dis");
-		return 0;
-	}
-
 	spin_lock_irqsave(&pmu->lock, flags);
 
 	/*
@@ -169,6 +163,29 @@ static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
 	return 0;
 }
 
+static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
+{
+	struct jh71xx_pmu *pmu = pmd->pmu;
+	const struct jh71xx_pmu_match_data *match_data = pmu->match_data;
+	bool is_on;
+	int ret;
+
+	ret = jh71xx_pmu_get_state(pmd, mask, &is_on);
+	if (ret) {
+		dev_dbg(pmu->dev, "unable to get current state for %s\n",
+			pmd->genpd.name);
+		return ret;
+	}
+
+	if (is_on == on) {
+		dev_dbg(pmu->dev, "pm domain [%s] is already %sable status.\n",
+			pmd->genpd.name, on ? "en" : "dis");
+		return 0;
+	}
+
+	return match_data->pmu_set_state(pmd, mask, on);
+}
+
 static int jh71xx_pmu_on(struct generic_pm_domain *genpd)
 {
 	struct jh71xx_pmu_dev *pmd = container_of(genpd,
@@ -229,6 +246,30 @@ static irqreturn_t jh71xx_pmu_interrupt(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int jh7110_pmu_parse_dt(struct platform_device *pdev, struct jh71xx_pmu *pmu)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	pmu->base = device_node_to_regmap(np);
+	if (IS_ERR(pmu->base))
+		return PTR_ERR(pmu->base);
+
+	pmu->irq = platform_get_irq(pdev, 0);
+	if (pmu->irq < 0)
+		return pmu->irq;
+
+	ret = devm_request_irq(dev, pmu->irq, jh71xx_pmu_interrupt,
+			       0, pdev->name, pmu);
+	if (ret)
+		dev_err(dev, "failed to request irq\n");
+
+	jh71xx_pmu_int_enable(pmu, JH71XX_PMU_INT_ALL_MASK & ~JH71XX_PMU_INT_PCH_FAIL, true);
+
+	return 0;
+}
+
 static int jh71xx_pmu_init_domain(struct jh71xx_pmu *pmu, int index)
 {
 	struct jh71xx_pmu_dev *pmd;
@@ -274,23 +315,18 @@ static int jh71xx_pmu_probe(struct platform_device *pdev)
 	if (!pmu)
 		return -ENOMEM;
 
-	pmu->base = device_node_to_regmap(np);
-	if (IS_ERR(pmu->base))
-		return PTR_ERR(pmu->base);
-
-	pmu->irq = platform_get_irq(pdev, 0);
-	if (pmu->irq < 0)
-		return pmu->irq;
-
-	ret = devm_request_irq(dev, pmu->irq, jh71xx_pmu_interrupt,
-			       0, pdev->name, pmu);
-	if (ret)
-		dev_err(dev, "failed to request irq\n");
+	spin_lock_init(&pmu->lock);
 
 	match_data = of_device_get_match_data(dev);
 	if (!match_data)
 		return -EINVAL;
 
+	ret = match_data->pmu_parse_dt(pdev, pmu);
+	if (ret) {
+		dev_err(dev, "failed to parse dt\n");
+		return ret;
+	}
+
 	pmu->genpd = devm_kcalloc(dev, match_data->num_domains,
 				  sizeof(struct generic_pm_domain *),
 				  GFP_KERNEL);
@@ -310,9 +346,6 @@ static int jh71xx_pmu_probe(struct platform_device *pdev)
 		}
 	}
 
-	spin_lock_init(&pmu->lock);
-	jh71xx_pmu_int_enable(pmu, JH71XX_PMU_INT_ALL_MASK & ~JH71XX_PMU_INT_PCH_FAIL, true);
-
 	ret = of_genpd_add_provider_onecell(np, &pmu->genpd_data);
 	if (ret) {
 		dev_err(dev, "failed to register genpd driver: %d\n", ret);
@@ -360,6 +393,9 @@ static const struct jh71xx_domain_info jh7110_power_domains[] = {
 static const struct jh71xx_pmu_match_data jh7110_pmu = {
 	.num_domains = ARRAY_SIZE(jh7110_power_domains),
 	.domain_info = jh7110_power_domains,
+	.pmu_status = JH71XX_PMU_CURR_POWER_MODE,
+	.pmu_parse_dt = jh7110_pmu_parse_dt,
+	.pmu_set_state = jh7110_pmu_set_state,
 };
 
 static const struct of_device_id jh71xx_pmu_of_match[] = {
-- 
2.25.1


  parent reply	other threads:[~2023-04-19  3:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-19  3:48 [PATCH v2 0/6] Add JH7110 AON PMU support Changhuang Liang
2023-04-19  3:48 ` [PATCH v2 1/6] dt-bindings: power: " Changhuang Liang
2023-04-19 18:00   ` Krzysztof Kozlowski
2023-04-19  3:48 ` [PATCH v2 2/6] soc: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Changhuang Liang
2023-04-19  3:48 ` [PATCH v2 3/6] soc: starfive: Modify ioremap to regmap Changhuang Liang
2023-04-19  3:48 ` Changhuang Liang [this message]
2023-04-19  3:48 ` [PATCH v2 5/6] soc: starfive: Add JH7110 AON PMU support Changhuang Liang
2023-04-19  3:48 ` [PATCH v2 6/6] riscv: dts: starfive: jh7110: Add AON PMU node Changhuang Liang
2023-04-19  3:48 ` [PATCH v2 6/6] riscv: dts: starfive: jh7110: Add starfive,jh7110-aon-pmu node Changhuang Liang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230419034833.43243-5-changhuang.liang@starfivetech.com \
    --to=changhuang.liang@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hal.feng@starfivetech.com \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=walker.chen@starfivetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).