Re: [PATCH V3 1/2] dt-bindings: interrupt-controller: Add Loongson EIOINTC

[Rob Herring <robh@kernel.org>]

On Thu, Apr 20, 2023 at 09:00:42PM +0800, Binbin Zhou wrote:
> On Thu, Apr 20, 2023 at 4:09 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
> >
> > On 19/04/2023 09:17, Binbin Zhou wrote:
> > > Add Loongson Extended I/O Interrupt controller binding with DT schema
> > > format using json-schema.
> > >
> > > Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
> > > ---
> > >  .../loongson,eiointc.yaml                     | 74 +++++++++++++++++++
> > >  1 file changed, 74 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
> > > new file mode 100644
> > > index 000000000000..4ab4efb061e1
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
> > > @@ -0,0 +1,74 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Loongson Extended I/O Interrupt Controller
> > > +
> > > +maintainers:
> > > +  - Binbin Zhou <zhoubinbin@loongson.cn>
> > > +
> > > +description: |
> > > +  This interrupt controller is found on the Loongson-3 family chips and
> > > +  Loongson-2K series chips and is used to distribute interrupts directly to
> > > +  individual cores without forwarding them through the HT's interrupt line.
> > > +
> > > +allOf:
> > > +  - $ref: /schemas/interrupt-controller.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - loongson,ls2k0500-eiointc
> > > +      - loongson,ls2k2000-eiointc
> > > +
> > > +  reg:
> > > +    items:
> > > +      - description: Interrupt enable registers
> > > +      - description: Interrupt status registers
> > > +      - description: Interrupt clear registers
> > > +      - description: Interrupt routing configuration registers
> > > +
> > > +  reg-names:
> > > +    items:
> > > +      - const: enable
> > > +      - const: status
> > > +      - const: clear
> > > +      - const: route
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  interrupt-controller: true
> > > +
> > > +  '#interrupt-cells':
> > > +    const: 1
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - interrupts
> > > +  - interrupt-controller
> > > +  - '#interrupt-cells'
> > > +
> > > +unevaluatedProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    eiointc: interrupt-controller@1fe11600 {
> > > +      compatible = "loongson,ls2k0500-eiointc";
> > > +      reg = <0x1fe11600 0x10>,
> > > +            <0x1fe11700 0x10>,
> > > +            <0x1fe11800 0x10>,
> > > +            <0x1fe114c0 0x4>;
> >
> > Binding is OK, but are you sure you want to split the address space like
> > this? It looks like two address spaces (enable+clear+status should be
> > one). Are you sure this is correct?
> >
> Hi Krzysztof:
> 
> These registers are all in the range of chip configuration registers,
> in the case of LS2K0500, which has a base address of 0x1fe10000.

Where is the schema for this? Either it should be the 
interrupt-controller itself or this binding should be a child node of 
it. Which way really depends on whether the eiointc is reused on 
multiple chips with different register offsets or parent block.

Can't really give better advice without a complete picture of the 'chip 
configuration registers'. So please provide that.

Rob