From: Philipp Zabel <p.zabel@pengutronix.de>
To: Jacky Huang <ychuang570808@gmail.com>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
lee@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
gregkh@linuxfoundation.org, jirislaby@kernel.org,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
arnd@arndb.de, schung@nuvoton.com, mjchen@nuvoton.com,
Jacky Huang <ychuang3@nuvoton.com>
Subject: Re: [PATCH v6 10/12] reset: Add Nuvoton ma35d1 reset driver support
Date: Mon, 24 Apr 2023 22:02:53 +0200 [thread overview]
Message-ID: <20230424200253.GC30248@pengutronix.de> (raw)
In-Reply-To: <20230328021912.177301-11-ychuang570808@gmail.com>
Hi Jacky,
On Tue, Mar 28, 2023 at 02:19:10AM +0000, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@nuvoton.com>
>
> This driver supports individual IP reset for ma35d1. The reset
> control registers is a subset of system control registers.
>
> Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
> ---
> drivers/reset/Kconfig | 6 ++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-ma35d1.c | 152 +++++++++++++++++++++++++++++++++++
> 3 files changed, 159 insertions(+)
> create mode 100644 drivers/reset/reset-ma35d1.c
>
[...]
> diff --git a/drivers/reset/reset-ma35d1.c b/drivers/reset/reset-ma35d1.c
> new file mode 100644
> index 000000000000..221299e7b873
> --- /dev/null
> +++ b/drivers/reset/reset-ma35d1.c
> @@ -0,0 +1,152 @@
[...]
> +static int ma35d1_reset_update(struct reset_controller_dev *rcdev,
> + unsigned long id, bool assert)
> +{
> + unsigned int reg;
> + int ret;
> + int offset = (id / RST_PRE_REG) * 4;
> + struct ma35d1_reset_data *data =
> + container_of(rcdev, struct ma35d1_reset_data, rcdev);
> +
> + ret = regmap_read(data->regmap, REG_SYS_IPRST0 + offset, ®);
> + if (ret < 0)
> + return ret;
> + if (assert)
> + reg |= 1 << (id % RST_PRE_REG);
> + else
> + reg &= ~(1 << (id % RST_PRE_REG));
> +
> + return regmap_write(data->regmap, REG_SYS_IPRST0 + offset, reg);
This should use regmap_update_bits().
[...]
> +static int ma35d1_reset_status(struct reset_controller_dev *rcdev,
> + unsigned long id)
> +{
> + int reg, ret;
> + int offset = id / RST_PRE_REG;
Should this be
int offset = (id / RST_PRE_REG) * 4;
?
> +static int ma35d1_reset_probe(struct platform_device *pdev)
> +{
> + int err;
> + struct device *dev = &pdev->dev;
> + struct device_node *parent;
> + struct ma35d1_reset_data *reset_data;
> + struct ma35d1_reboot_data *reboot_data;
> +
> + if (!pdev->dev.of_node) {
> + dev_err(&pdev->dev, "Device tree node not found\n");
> + return -EINVAL;
> + }
> +
> + reset_data = devm_kzalloc(dev, sizeof(*reset_data), GFP_KERNEL);
> + if (!reset_data)
> + return -ENOMEM;
> +
> + reboot_data = devm_kzalloc(dev, sizeof(*reboot_data), GFP_KERNEL);
> + if (!reboot_data)
> + return -ENOMEM;
These structures could be combined into one.
regards
Philipp
next prev parent reply other threads:[~2023-04-24 20:03 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 2:19 [PATCH v6 00/12] Introduce Nuvoton ma35d1 SoC Jacky Huang
2023-03-28 2:19 ` [PATCH v6 01/12] arm64: Kconfig.platforms: Add config for Nuvoton MA35 platform Jacky Huang
2023-03-28 2:19 ` [PATCH v6 02/12] arm64: defconfig: Add support for Nuvoton MA35 family SoCs Jacky Huang
2023-03-28 2:19 ` [PATCH v6 03/12] dt-bindings: clock: nuvoton: add binding for ma35d1 clock controller Jacky Huang
2023-03-29 8:14 ` Krzysztof Kozlowski
2023-03-28 2:19 ` [PATCH v6 04/12] dt-bindings: reset: nuvoton: add binding for ma35d1 IP reset control Jacky Huang
2023-03-28 17:48 ` Stephen Boyd
2023-03-29 8:53 ` Jacky Huang
2023-03-29 8:17 ` Krzysztof Kozlowski
2023-03-29 9:12 ` Jacky Huang
2023-03-29 9:27 ` Krzysztof Kozlowski
2023-03-29 9:33 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 05/12] dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible Jacky Huang
2023-04-05 15:27 ` Lee Jones
2023-03-28 2:19 ` [PATCH v6 06/12] dt-bindings: arm: Add initial bindings for Nuvoton platform Jacky Huang
2023-03-28 15:41 ` kernel test robot
2023-03-29 8:19 ` Krzysztof Kozlowski
2023-03-29 8:32 ` Jacky Huang
2023-03-29 13:07 ` Rob Herring
2023-03-30 10:41 ` Jacky Huang
2023-03-30 13:25 ` Krzysztof Kozlowski
2023-03-31 2:15 ` Jacky Huang
2023-04-03 20:33 ` Rob Herring
2023-04-06 2:09 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 07/12] dt-bindings: serial: Document ma35d1 uart controller Jacky Huang
2023-03-29 8:20 ` Krzysztof Kozlowski
2023-03-29 8:44 ` Jacky Huang
2023-03-30 7:33 ` Krzysztof Kozlowski
2023-03-30 10:52 ` Jacky Huang
2023-03-30 13:12 ` Rob Herring
2023-03-31 2:03 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 08/12] arm64: dts: nuvoton: Add initial ma35d1 device tree Jacky Huang
2023-03-28 17:57 ` Stephen Boyd
2023-03-29 2:03 ` Jacky Huang
2023-03-29 2:19 ` Stephen Boyd
2023-03-29 2:39 ` Jacky Huang
2023-03-29 2:46 ` Stephen Boyd
2023-03-29 3:13 ` Jacky Huang
2023-03-29 3:25 ` Stephen Boyd
2023-03-29 3:43 ` Jacky Huang
2023-03-29 3:54 ` Stephen Boyd
2023-03-29 6:02 ` Jacky Huang
2023-03-29 17:52 ` Stephen Boyd
2023-03-29 8:21 ` Krzysztof Kozlowski
2023-03-29 8:36 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 09/12] clk: nuvoton: Add clock driver for ma35d1 clock controller Jacky Huang
2023-03-28 18:18 ` Stephen Boyd
2023-03-30 10:36 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 10/12] reset: Add Nuvoton ma35d1 reset driver support Jacky Huang
2023-04-24 20:02 ` Philipp Zabel [this message]
2023-04-25 1:22 ` Jacky Huang
2023-03-28 2:19 ` [PATCH v6 11/12] tty: serial: Add Nuvoton ma35d1 serial " Jacky Huang
2023-03-28 9:23 ` Jiri Slaby
2023-03-29 8:06 ` Jacky Huang
2023-03-31 0:29 ` kernel test robot
2023-03-28 2:19 ` [PATCH v6 12/12] MAINTAINERS: Add entry for NUVOTON MA35 Jacky Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230424200253.GC30248@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mjchen@nuvoton.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=schung@nuvoton.com \
--cc=ychuang3@nuvoton.com \
--cc=ychuang570808@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).