From: Chris Morgan <macroalpha82@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
robh+dt@kernel.org, daniel@ffwll.ch, airlied@gmail.com,
sam@ravnborg.org, neil.armstrong@linaro.org, megous@megous.com,
kernel@puri.sm, agx@sigxcpu.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V3 3/3] drm/panel: st7703: Add Anbernic RG353V-V2 Panel Support
Date: Wed, 26 Apr 2023 09:32:13 -0500 [thread overview]
Message-ID: <20230426143213.4178586-4-macroalpha82@gmail.com> (raw)
In-Reply-To: <20230426143213.4178586-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the
Anbernic RG353V handheld gaming device. Add support for it.
Unfortunately it appears this controller is not able to support 120hz
or 100hz mode like the first revision panel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
---
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index fc55b5fbb67f..3aa31f3d6157 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -28,6 +28,7 @@
/* Manufacturer specific Commands send via DSI */
#define ST7703_CMD_ALL_PIXEL_OFF 0x22
#define ST7703_CMD_ALL_PIXEL_ON 0x23
+#define ST7703_CMD_SETAPID 0xB1
#define ST7703_CMD_SETDISP 0xB2
#define ST7703_CMD_SETRGBIF 0xB3
#define ST7703_CMD_SETCYC 0xB4
@@ -42,11 +43,14 @@
#define ST7703_CMD_SETSCR 0xC0
#define ST7703_CMD_SETPOWER 0xC1
#define ST7703_CMD_SETECO 0xC6
+#define ST7703_CMD_SETIO 0xC7
+#define ST7703_CMD_SETCABC 0xC8
#define ST7703_CMD_SETPANEL 0xCC
#define ST7703_CMD_SETGAMMA 0xE0
#define ST7703_CMD_SETEQ 0xE3
#define ST7703_CMD_SETGIP1 0xE9
#define ST7703_CMD_SETGIP2 0xEA
+#define ST7703_CMD_UNKNOWN_EF 0xEF
struct st7703 {
struct device *dev;
@@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = {
.init_sequence = xbd599_init_sequence,
};
+static int rg353v2_init_sequence(struct st7703 *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ /*
+ * Init sequence was supplied by the panel vendor.
+ */
+
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
+ 0xda, 0x80);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
+ 0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
+ 0xf0, 0x63);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
+ 0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
+ 0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
+ 0x00, 0x00, 0x12, 0x50, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
+ 0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
+ 0x33);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
+ 0x00, 0xff);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
+ 0x00, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
+ 0x02);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
+ 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
+ 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
+ 0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
+ 0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
+ 0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
+ 0xc0, 0x10);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
+ 0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
+ 0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
+ 0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
+ 0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
+ 0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
+ 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
+ 0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
+ 0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
+ 0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00);
+ mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
+
+ return 0;
+}
+
+static const struct drm_display_mode rg353v2_mode = {
+ .hdisplay = 640,
+ .hsync_start = 640 + 40,
+ .hsync_end = 640 + 40 + 2,
+ .htotal = 640 + 40 + 2 + 80,
+ .vdisplay = 480,
+ .vsync_start = 480 + 18,
+ .vsync_end = 480 + 18 + 2,
+ .vtotal = 480 + 18 + 2 + 28,
+ .clock = 24150,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .width_mm = 70,
+ .height_mm = 57,
+};
+
+static const struct st7703_panel_desc rg353v2_desc = {
+ .mode = &rg353v2_mode,
+ .lanes = 4,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
+ .format = MIPI_DSI_FMT_RGB888,
+ .init_sequence = rg353v2_init_sequence,
+};
+
static int st7703_enable(struct drm_panel *panel)
{
struct st7703 *ctx = panel_to_st7703(panel);
@@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
}
static const struct of_device_id st7703_of_match[] = {
+ { .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
{ /* sentinel */ }
--
2.34.1
next prev parent reply other threads:[~2023-04-26 14:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-26 14:32 [PATCH V3 0/3] drm/panel: Add Anbernic RG353V-V2 Panel Chris Morgan
2023-04-26 14:32 ` [PATCH V3 1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible Chris Morgan
2023-04-26 14:32 ` [PATCH V3 2/3] drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO Chris Morgan
2023-04-26 14:32 ` Chris Morgan [this message]
2023-04-27 11:47 ` [PATCH V3 0/3] drm/panel: Add Anbernic RG353V-V2 Panel Neil Armstrong
2023-04-27 11:49 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230426143213.4178586-4-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=agx@sigxcpu.org \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@puri.sm \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=macromorgan@hotmail.com \
--cc=megous@megous.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).