[PATCH v2 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v2 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals
@ 2023-05-01 10:58 Bhupesh Sharma
  2023-05-01 10:58 ` [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states Bhupesh Sharma
                   ` (2 more replies)
  0 siblings, 3 replies; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-01 10:58 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
	bhupesh.sharma, robh+dt, krzysztof.kozlowski, devicetree

Changes since v1:
-----------------
- v1 can be seen here: https://lore.kernel.org/linux-arm-msm/20230501102035.1180701-2-bhupesh.sharma@linaro.org/
- Converted the SDHC2 CD gpio fix into a separate patch as
  suggested by Krzysztof.

Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

While at it also fix the Card-Detect (CD) gpio for SDHC2 which
allows the uSD card to be detected on the board.

Also enable the adsp and cdsp remoteproc nodes on QRB4210-RB2 board.

Bhupesh Sharma (3):
  arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes

 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 27 +++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

-- 
2.38.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  2023-05-01 10:58 [PATCH v2 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals Bhupesh Sharma
@ 2023-05-01 10:58 ` Bhupesh Sharma
  2023-05-01 11:31   ` Krzysztof Kozlowski
  2023-05-02 11:57   ` Konrad Dybcio
  2023-05-01 10:58 ` [PATCH v2 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2 Bhupesh Sharma
  2023-05-01 10:58 ` [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes Bhupesh Sharma
  2 siblings, 2 replies; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-01 10:58 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
	bhupesh.sharma, robh+dt, krzysztof.kozlowski, devicetree

Add the default and sleep pinctrl states for SDHC1 & 2 controllers
on QRB4210 RB2 board.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..5a5294cc6e45 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
 };
 
 &sdhc_1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+
 	vmmc-supply = <&vreg_l24a_2p96>;
 	vqmmc-supply = <&vreg_l11a_1p8>;
 	no-sdio;
@@ -200,6 +204,10 @@ &sdhc_1 {
 
 &sdhc_2 {
 	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+
 	vmmc-supply = <&vreg_l22a_2p96>;
 	vqmmc-supply = <&vreg_l5a_2p96>;
 	no-sdio;
@@ -216,6 +224,13 @@ &tlmm {
 			       <49 1>, <52 1>, <54 1>,
 			       <56 3>, <61 2>, <64 1>,
 			       <68 1>, <72 8>, <96 1>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
 
 &uart4 {
-- 
2.38.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  2023-05-01 10:58 ` [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states Bhupesh Sharma
@ 2023-05-01 11:31   ` Krzysztof Kozlowski
  2023-05-02 11:57   ` Konrad Dybcio
  1 sibling, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-05-01 11:31 UTC (permalink / raw)
  To: Bhupesh Sharma, linux-arm-msm
  Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
	robh+dt, devicetree

On 01/05/2023 12:58, Bhupesh Sharma wrote:
> Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> on QRB4210 RB2 board.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  2023-05-01 10:58 ` [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states Bhupesh Sharma
  2023-05-01 11:31   ` Krzysztof Kozlowski
@ 2023-05-02 11:57   ` Konrad Dybcio
  2023-05-04 17:17     ` Bhupesh Sharma
  1 sibling, 1 reply; 12+ messages in thread
From: Konrad Dybcio @ 2023-05-02 11:57 UTC (permalink / raw)
  To: Bhupesh Sharma, linux-arm-msm
  Cc: agross, andersson, linux-kernel, bhupesh.linux, robh+dt,
	krzysztof.kozlowski, devicetree



On 1.05.2023 12:58, Bhupesh Sharma wrote:
> Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> on QRB4210 RB2 board.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> index dc80f0bca767..5a5294cc6e45 100644
> --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> @@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
>  };
>  
>  &sdhc_1 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc1_state_on>;
> +	pinctrl-1 = <&sdc1_state_off>;
property-n
property-names

Other than that:
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> +
>  	vmmc-supply = <&vreg_l24a_2p96>;
>  	vqmmc-supply = <&vreg_l11a_1p8>;
>  	no-sdio;
> @@ -200,6 +204,10 @@ &sdhc_1 {
>  
>  &sdhc_2 {
>  	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
> +	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
> +
>  	vmmc-supply = <&vreg_l22a_2p96>;
>  	vqmmc-supply = <&vreg_l5a_2p96>;
>  	no-sdio;
> @@ -216,6 +224,13 @@ &tlmm {
>  			       <49 1>, <52 1>, <54 1>,
>  			       <56 3>, <61 2>, <64 1>,
>  			       <68 1>, <72 8>, <96 1>;
> +
> +	sdc2_card_det_n: sd-card-det-n-state {
> +		pins = "gpio88";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-pull-up;
> +	};
>  };
>  
>  &uart4 {

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states
  2023-05-02 11:57   ` Konrad Dybcio
@ 2023-05-04 17:17     ` Bhupesh Sharma
  0 siblings, 0 replies; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-04 17:17 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: linux-arm-msm, agross, andersson, linux-kernel, bhupesh.linux,
	robh+dt, krzysztof.kozlowski, devicetree

On Tue, 2 May 2023 at 17:27, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 1.05.2023 12:58, Bhupesh Sharma wrote:
> > Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> > on QRB4210 RB2 board.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > index dc80f0bca767..5a5294cc6e45 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > @@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
> >  };
> >
> >  &sdhc_1 {
> > +     pinctrl-names = "default", "sleep";
> > +     pinctrl-0 = <&sdc1_state_on>;
> > +     pinctrl-1 = <&sdc1_state_off>;
> property-n
> property-names
>
> Other than that:
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Sure, let me fix this in v3.

Thanks,
Bhupesh

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v2 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  2023-05-01 10:58 [PATCH v2 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals Bhupesh Sharma
  2023-05-01 10:58 ` [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states Bhupesh Sharma
@ 2023-05-01 10:58 ` Bhupesh Sharma
  2023-05-01 11:31   ` Krzysztof Kozlowski
  2023-05-01 10:58 ` [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes Bhupesh Sharma
  2 siblings, 1 reply; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-01 10:58 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
	bhupesh.sharma, robh+dt, krzysztof.kozlowski, devicetree

Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same.
This allows the uSD card to be properly detected on the board.

Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index 5a5294cc6e45..bff6ba1d689f 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -203,7 +203,7 @@ &sdhc_1 {
 };
 
 &sdhc_2 {
-	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
 	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
-- 
2.38.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2
  2023-05-01 10:58 ` [PATCH v2 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2 Bhupesh Sharma
@ 2023-05-01 11:31   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2023-05-01 11:31 UTC (permalink / raw)
  To: Bhupesh Sharma, linux-arm-msm
  Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
	robh+dt, devicetree

On 01/05/2023 12:58, Bhupesh Sharma wrote:
> Card-Detect (CD) gpio for SDHC2 is an active GPIO line. Fix the same.
> This allows the uSD card to be properly detected on the board.
> 
> Fixes: 8d58a8c0d930 ("arm64: dts: qcom: Add base qrb4210-rb2 board dts")
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  2023-05-01 10:58 [PATCH v2 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals Bhupesh Sharma
  2023-05-01 10:58 ` [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states Bhupesh Sharma
  2023-05-01 10:58 ` [PATCH v2 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2 Bhupesh Sharma
@ 2023-05-01 10:58 ` Bhupesh Sharma
  2023-05-02 11:58   ` Konrad Dybcio
  2 siblings, 1 reply; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-01 10:58 UTC (permalink / raw)
  To: linux-arm-msm
  Cc: agross, andersson, konrad.dybcio, linux-kernel, bhupesh.linux,
	bhupesh.sharma, robh+dt, krzysztof.kozlowski, devicetree

Enable the aDSP and cDSP remoteproc nodes on Qualcomm QRB4210 RB2 board.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index bff6ba1d689f..3ab46499d3fa 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -34,6 +34,16 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm6115/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm6115/cdsp.mdt";
+};
+
 &rpm_requests {
 	regulators {
 		compatible = "qcom,rpm-pm6125-regulators";
-- 
2.38.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  2023-05-01 10:58 ` [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes Bhupesh Sharma
@ 2023-05-02 11:58   ` Konrad Dybcio
  2023-05-02 12:23     ` Dmitry Baryshkov
  2023-05-04 17:15     ` Bhupesh Sharma
  0 siblings, 2 replies; 12+ messages in thread
From: Konrad Dybcio @ 2023-05-02 11:58 UTC (permalink / raw)
  To: Bhupesh Sharma, linux-arm-msm
  Cc: agross, andersson, linux-kernel, bhupesh.linux, robh+dt,
	krzysztof.kozlowski, devicetree



On 1.05.2023 12:58, Bhupesh Sharma wrote:
> Enable the aDSP and cDSP remoteproc nodes on Qualcomm QRB4210 RB2 board.
> 
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> index bff6ba1d689f..3ab46499d3fa 100644
> --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> @@ -34,6 +34,16 @@ &qupv3_id_0 {
>  	status = "okay";
>  };
>  
> +&remoteproc_adsp {
> +	status = "okay";
> +	firmware-name = "qcom/sm6115/adsp.mdt";
status last
also, don't we want to use .mbn (squashed binary)?

Konrad
> +};
> +
> +&remoteproc_cdsp {
> +	status = "okay";
> +	firmware-name = "qcom/sm6115/cdsp.mdt";
> +};
> +
>  &rpm_requests {
>  	regulators {
>  		compatible = "qcom,rpm-pm6125-regulators";

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  2023-05-02 11:58   ` Konrad Dybcio
@ 2023-05-02 12:23     ` Dmitry Baryshkov
  2023-05-04 17:16       ` Bhupesh Sharma
  2023-05-04 17:15     ` Bhupesh Sharma
  1 sibling, 1 reply; 12+ messages in thread
From: Dmitry Baryshkov @ 2023-05-02 12:23 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: Bhupesh Sharma, linux-arm-msm, agross, andersson, linux-kernel,
	bhupesh.linux, robh+dt, krzysztof.kozlowski, devicetree

On Tue, 2 May 2023 at 14:58, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 1.05.2023 12:58, Bhupesh Sharma wrote:
> > Enable the aDSP and cDSP remoteproc nodes on Qualcomm QRB4210 RB2 board.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > index bff6ba1d689f..3ab46499d3fa 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > @@ -34,6 +34,16 @@ &qupv3_id_0 {
> >       status = "okay";
> >  };
> >
> > +&remoteproc_adsp {
> > +     status = "okay";
> > +     firmware-name = "qcom/sm6115/adsp.mdt";
> status last
> also, don't we want to use .mbn (squashed binary)?

Yes, please. Also, just to make sure, are sm6115 and qrb4210 binaries
fully compatible? We already have a mess of sdm845 vs sda845.

>
> Konrad
> > +};
> > +
> > +&remoteproc_cdsp {
> > +     status = "okay";
> > +     firmware-name = "qcom/sm6115/cdsp.mdt";
> > +};
> > +
> >  &rpm_requests {
> >       regulators {
> >               compatible = "qcom,rpm-pm6125-regulators";



-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  2023-05-02 12:23     ` Dmitry Baryshkov
@ 2023-05-04 17:16       ` Bhupesh Sharma
  0 siblings, 0 replies; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-04 17:16 UTC (permalink / raw)
  To: Dmitry Baryshkov
  Cc: Konrad Dybcio, linux-arm-msm, agross, andersson, linux-kernel,
	bhupesh.linux, robh+dt, krzysztof.kozlowski, devicetree

On Tue, 2 May 2023 at 17:53, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Tue, 2 May 2023 at 14:58, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> >
> > On 1.05.2023 12:58, Bhupesh Sharma wrote:
> > > Enable the aDSP and cDSP remoteproc nodes on Qualcomm QRB4210 RB2 board.
> > >
> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > > ---
> > >  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 10 ++++++++++
> > >  1 file changed, 10 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > > index bff6ba1d689f..3ab46499d3fa 100644
> > > --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > > +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > > @@ -34,6 +34,16 @@ &qupv3_id_0 {
> > >       status = "okay";
> > >  };
> > >
> > > +&remoteproc_adsp {
> > > +     status = "okay";
> > > +     firmware-name = "qcom/sm6115/adsp.mdt";
> > status last
> > also, don't we want to use .mbn (squashed binary)?
>
> Yes, please. Also, just to make sure, are sm6115 and qrb4210 binaries
> fully compatible? We already have a mess of sdm845 vs sda845.

That's a fair point. Let's use qrb4210 naming instead of sm6115 here.
I will send a fixed version shortly.

Thanks,
Bhupesh

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes
  2023-05-02 11:58   ` Konrad Dybcio
  2023-05-02 12:23     ` Dmitry Baryshkov
@ 2023-05-04 17:15     ` Bhupesh Sharma
  1 sibling, 0 replies; 12+ messages in thread
From: Bhupesh Sharma @ 2023-05-04 17:15 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: linux-arm-msm, agross, andersson, linux-kernel, bhupesh.linux,
	robh+dt, krzysztof.kozlowski, devicetree

On Tue, 2 May 2023 at 17:28, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> On 1.05.2023 12:58, Bhupesh Sharma wrote:
> > Enable the aDSP and cDSP remoteproc nodes on Qualcomm QRB4210 RB2 board.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > index bff6ba1d689f..3ab46499d3fa 100644
> > --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> > @@ -34,6 +34,16 @@ &qupv3_id_0 {
> >       status = "okay";
> >  };
> >
> > +&remoteproc_adsp {
> > +     status = "okay";
> > +     firmware-name = "qcom/sm6115/adsp.mdt";
> status last
> also, don't we want to use .mbn (squashed binary)?

Ok, let me fix this in the next version.

Thanks,
Bhupesh

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2023-05-04 17:17 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-05-01 10:58 [PATCH v2 0/3] arm64: dts: qcom: QRB4210-RB2 board: Enable more peripherals Bhupesh Sharma
2023-05-01 10:58 ` [PATCH v2 1/3] arm64: dts: qcom: qrb4210-rb2: Add SD pinctrl states Bhupesh Sharma
2023-05-01 11:31   ` Krzysztof Kozlowski
2023-05-02 11:57   ` Konrad Dybcio
2023-05-04 17:17     ` Bhupesh Sharma
2023-05-01 10:58 ` [PATCH v2 2/3] arm64: dts: qcom: qrb4210-rb2: Fix CD gpio for SDHC2 Bhupesh Sharma
2023-05-01 11:31   ` Krzysztof Kozlowski
2023-05-01 10:58 ` [PATCH v2 3/3] arm64: dts: qcom: qrb4210-rb2: Enable aDSP and cDSP remoteproc nodes Bhupesh Sharma
2023-05-02 11:58   ` Konrad Dybcio
2023-05-02 12:23     ` Dmitry Baryshkov
2023-05-04 17:16       ` Bhupesh Sharma
2023-05-04 17:15     ` Bhupesh Sharma

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).