[PATCH v4 1/4] arm64: dts: qcom: sa8155p-adp: Make compatible the first property

[Andrew Halaney <ahalaney@redhat.com>]

As stated at the below link in another review, compatible is always the
first property.

Follow suit here to avoid copying incorrectly in the future.

Link: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@redhat.com/T/#ma76b4116bbb9e49ee4bcf699e40935d80965b3f3
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v3:
    * None
Changes since v2:
    * Collect tags
Changes since v1:
    * None

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 339fea522509..029b23198b3a 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -352,19 +352,18 @@ &ethernet {
 	max-speed = <1000>;
 
 	mdio {
+		compatible = "snps,dwmac-mdio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
 
-		compatible = "snps,dwmac-mdio";
-
 		/* Micrel KSZ9031RNZ PHY */
 		rgmii_phy: phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x7>;
 
 			interrupt-parent = <&tlmm>;
 			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
 			device_type = "ethernet-phy";
-			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
-- 
2.40.0