From: Neil Armstrong <neil.armstrong@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <neil.armstrong@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector
Date: Tue, 23 May 2023 09:15:44 +0200 [thread overview]
Message-ID: <20230503-topic-sm8450-graphics-dp-next-v3-0-6c43d293995f@linaro.org> (raw)
This is the final step to achieve USB-C Altmode on the HDK8350
and HDK8450 now DP controller support, USB3+DP Combo PHY and
pmic glink support have been merged for those platforms.
This patchset depends on the QMP Combo USB3+DP PHY orientation
support at [1].
The following has been successfully tested:
- USB-C PD Power Role, reported status are coherent
- USB-C dual-role data
- USB2.0 only (no-PD) as DFP or UFP
- USB2.0 + USB SuperSpeed as DFP or UFP & in both orientations
- USB2.0 + USB SuperSpeed + DisplayPort Altmode in both orientations
- DisplayPort-only Altmode in both orientations
Data role and SuperSpeed lanes were correctly switched on the PHY
side after USB-C removal/insertion.
[1] https://lore.kernel.org/all/20230510031930.1996020-1-quic_bjorande@quicinc.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v3:
- Rebased on next-230523 now PHY patches were applied
- Link to v2: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v2-0-8acbbe1e9d14@linaro.org
Changes in v2:
- rebased on next-230510 + orientation patchset v2
- define port@2 in patches 1 & 2
- Add reviewed tags
- Renamed fsa4480 node name
- Added missing blank line
- Moved status at last position
- Re-ordered node ref
- Fixed commit message of last patch
- Link to v1: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v1-0-d1ee9397f2a6@linaro.org
---
Neil Armstrong (6):
arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node
arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph
arm64: defconfig: enable FSA4480 driver as module
qcom: pmic_glink: enable altmode for SM8450
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 76 ++++++++++++++++++++++++++++++++-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 +++++++++++
arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 73 ++++++++++++++++++++++++++++++-
arch/arm64/boot/dts/qcom/sm8450.dtsi | 26 +++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/soc/qcom/pmic_glink.c | 8 +++-
6 files changed, 204 insertions(+), 6 deletions(-)
---
base-commit: 8e7eb170057ce57f049f7b6749741d7b23d09af2
change-id: 20230503-topic-sm8450-graphics-dp-next-1dab962ae67d
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
next reply other threads:[~2023-05-23 7:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 7:15 Neil Armstrong [this message]
2023-05-23 7:15 ` [PATCH v3 1/6] arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 2/6] arm64: dts: qcom: sm8450: " Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 3/6] arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 4/6] arm64: dts: qcom: sm8450-hdk: " Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 5/6] arm64: defconfig: enable FSA4480 driver as module Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 6/6] qcom: pmic_glink: enable altmode for SM8450 Neil Armstrong
2023-05-23 19:40 ` (subset) [PATCH v3 0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230503-topic-sm8450-graphics-dp-next-v3-0-6c43d293995f@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).