From: Neil Armstrong <neil.armstrong@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v3 3/6] arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
Date: Tue, 23 May 2023 09:15:47 +0200 [thread overview]
Message-ID: <20230503-topic-sm8450-graphics-dp-next-v3-3-6c43d293995f@linaro.org> (raw)
In-Reply-To: <20230503-topic-sm8450-graphics-dp-next-v3-0-6c43d293995f@linaro.org>
With support for the QMP combo phy to react to USB Type-C switch events,
introduce it as the next hop for the SuperSpeed lanes of the Type-C
connector, and connect the output of the DisplayPort controller
to the QMP combo phy.
This allows the TCPM to perform orientation switching of both USB and
DisplayPort signals.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 76 ++++++++++++++++++++++++++++++++-
1 file changed, 74 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 2ee1b121686a..d3788bd72ac3 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -58,7 +58,15 @@ port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
- remote-endpoint = <&usb_1_dwc3_ss>;
+ remote-endpoint = <&usb_1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_sbu: endpoint {
+ remote-endpoint = <&fsa4480_sbu_mux>;
};
};
};
@@ -326,6 +334,37 @@ zap-shader {
};
};
+&i2c13 {
+ clock-frequency = <100000>;
+
+ status = "okay";
+
+ typec-mux@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+
+ interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc-supply = <&vreg_bob>;
+ mode-switch;
+ orientation-switch;
+ svid = /bits/ 16 <0xff01>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ fsa4480_sbu_mux: endpoint {
+ remote-endpoint = <&pmic_glink_sbu>;
+ };
+ };
+ };
+ };
+};
+
&i2c15 {
clock-frequency = <400000>;
status = "okay";
@@ -370,6 +409,21 @@ &mdss {
status = "okay";
};
+&mdss_dp {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
+ };
+ };
+ };
+};
+
&mdss_mdp {
status = "okay";
};
@@ -416,6 +470,10 @@ &qupv3_id_0 {
status = "okay";
};
+&qupv3_id_1 {
+ status = "okay";
+};
+
&qupv3_id_2 {
status = "okay";
};
@@ -716,7 +774,7 @@ &usb_1_dwc3_hs {
};
&usb_1_dwc3_ss {
- remote-endpoint = <&pmic_glink_ss_in>;
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
};
&usb_1_hsphy {
@@ -732,6 +790,20 @@ &usb_1_qmpphy {
vdda-phy-supply = <&vreg_l6b_1p2>;
vdda-pll-supply = <&vreg_l1b_0p88>;
+
+ orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+ remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_1_qmpphy_out {
+ remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+ remote-endpoint = <&usb_1_dwc3_ss>;
};
&usb_2 {
--
2.34.1
next prev parent reply other threads:[~2023-05-23 7:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-23 7:15 [PATCH v3 0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 1/6] arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 2/6] arm64: dts: qcom: sm8450: " Neil Armstrong
2023-05-23 7:15 ` Neil Armstrong [this message]
2023-05-23 7:15 ` [PATCH v3 4/6] arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 5/6] arm64: defconfig: enable FSA4480 driver as module Neil Armstrong
2023-05-23 7:15 ` [PATCH v3 6/6] qcom: pmic_glink: enable altmode for SM8450 Neil Armstrong
2023-05-23 19:40 ` (subset) [PATCH v3 0/6] arm64: qcom: sm8[34]50: enable DP altmode on USB-C Connector Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230503-topic-sm8450-graphics-dp-next-v3-3-6c43d293995f@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).