From: Thejasvi Konduru <t-konduru@ti.com>
To: Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Andrew Davis <afd@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Apurva Nandan <a-nandan@ti.com>, Udit Kumar <u-kumar1@ti.com>,
Thejasvi Konduru <t-konduru@ti.com>
Subject: [PATCH] arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets
Date: Wed, 3 May 2023 14:01:43 +0530 [thread overview]
Message-ID: <20230503083143.32369-1-t-konduru@ti.com> (raw)
The wkup_pmx register region in j784s4 has multiple non-addressable
regions, hence the existing wkup_pmx region is split as follows to
avoid the non-addressable regions. The pinctrl node offsets are
also corrected as per the newly split wkup_pmx* nodes.
wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
wkup_pmx1 -> 11 pins (WKUP_PADCONFIG 14 - 24)
wkup_pmx2 -> 72 pins (WKUP_PADCONFIG 26 - 97)
wkup_pmx3 -> 1 pin (WKUP_PADCONFIG 100)
Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Signed-off-by: Thejasvi Konduru <t-konduru@ti.com>
---
arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 30 +++++++++----------
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 29 +++++++++++++++++-
2 files changed, 43 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f33815953e77..490d0b8624f3 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -141,28 +141,28 @@
};
};
-&wkup_pmx0 {
+&wkup_pmx2 {
mcu_cpsw_pins_default: mcu-cpsw-pins-default {
pinctrl-single,pins = <
- J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
- J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
- J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
- J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
- J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
- J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
- J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
- J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
- J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
- J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
- J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
- J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+ J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+ J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+ J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+ J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+ J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+ J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+ J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+ J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+ J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+ J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+ J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+ J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
>;
};
mcu_mdio_pins_default: mcu-mdio-pins-default {
pinctrl-single,pins = <
- J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
- J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+ J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index f04fcb614cbe..ed2b40369c59 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -50,7 +50,34 @@
wkup_pmx0: pinctrl@4301c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
- reg = <0x00 0x4301c000 0x00 0x178>;
+ reg = <0x00 0x4301c000 0x00 0x034>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx1: pinctrl@4301c038 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c038 0x00 0x02c>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx2: pinctrl@4301c068 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c068 0x00 0x120>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ wkup_pmx3: pinctrl@4301c190 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c190 0x00 0x004>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
--
2.17.1
next reply other threads:[~2023-05-03 8:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-03 8:31 Thejasvi Konduru [this message]
2023-05-03 11:46 ` [PATCH] arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets Nishanth Menon
2023-05-04 9:06 ` Thejasvi Konduru
2023-05-04 11:52 ` Nishanth Menon
2023-05-04 12:10 ` Thejasvi Konduru
2023-05-04 14:22 ` Nishanth Menon
2023-05-09 9:49 ` Thejasvi Konduru
2023-06-01 11:48 ` Thejasvi Konduru
2023-06-02 21:24 ` Nishanth Menon
2023-06-15 13:28 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230503083143.32369-1-t-konduru@ti.com \
--to=t-konduru@ti.com \
--cc=a-nandan@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).