From: haibo.chen@nxp.com
To: adrian.hunter@intel.com, ulf.hansson@linaro.org,
linux-mmc@vger.kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
s.hauer@pengutronix.de
Cc: linux-imx@nxp.com, haibo.chen@nxp.com, kernel@pengutronix.de,
festevam@gmail.com, cniedermaier@dh-electronics.com,
devicetree@vger.kernel.org, kernel@dh-electronics.com
Subject: [PATCH v2 2/4] mmc: sdhci-esdhc-imx: remove redundant write protect code
Date: Sat, 6 May 2023 15:40:35 +0800 [thread overview]
Message-ID: <20230506074037.522961-3-haibo.chen@nxp.com> (raw)
In-Reply-To: <20230506074037.522961-1-haibo.chen@nxp.com>
From: Haibo Chen <haibo.chen@nxp.com>
The logic of the esdhc_pltfm_get_ro() is just the same with common
code sdhci_check_ro(). So remove this redundant code, depends on
mmc_of_parse() and sdhci_check_ro() to cover the write protect
logic.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 47 +-----------------------------
1 file changed, 1 insertion(+), 46 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index c7db742f729c..54531aab70f0 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -201,22 +201,8 @@
/* ERR004536 is not applicable for the IP */
#define ESDHC_FLAG_SKIP_ERR004536 BIT(17)
-enum wp_types {
- ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
- ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
- ESDHC_WP_GPIO, /* external gpio pin for WP */
-};
-
-/*
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_type: type of write_protect method (see wp_types enum above)
- */
-
+/* struct esdhc_platform_data - platform data for esdhc on i.MX */
struct esdhc_platform_data {
- enum wp_types wp_type;
int max_bus_width;
unsigned int delay_line;
unsigned int tuning_step; /* The delay cell steps in tuning procedure */
@@ -994,25 +980,6 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
}
-static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)
-{
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
- struct esdhc_platform_data *boarddata = &imx_data->boarddata;
-
- switch (boarddata->wp_type) {
- case ESDHC_WP_GPIO:
- return mmc_gpio_get_ro(host->mmc);
- case ESDHC_WP_CONTROLLER:
- return !(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
- SDHCI_WRITE_PROTECT);
- case ESDHC_WP_NONE:
- break;
- }
-
- return -ENOSYS;
-}
-
static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
{
u32 ctrl;
@@ -1380,7 +1347,6 @@ static struct sdhci_ops sdhci_esdhc_ops = {
.get_max_clock = esdhc_pltfm_get_max_clock,
.get_min_clock = esdhc_pltfm_get_min_clock,
.get_max_timeout_count = esdhc_get_max_timeout_count,
- .get_ro = esdhc_pltfm_get_ro,
.set_timeout = esdhc_set_timeout,
.set_bus_width = esdhc_pltfm_set_bus_width,
.set_uhs_signaling = esdhc_set_uhs_signaling,
@@ -1588,17 +1554,6 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
struct esdhc_platform_data *boarddata = &imx_data->boarddata;
int ret;
- if (of_property_read_bool(np, "fsl,wp-controller"))
- boarddata->wp_type = ESDHC_WP_CONTROLLER;
-
- /*
- * If we have this property, then activate WP check.
- * Retrieveing and requesting the actual WP GPIO will happen
- * in the call to mmc_of_parse().
- */
- if (of_property_read_bool(np, "wp-gpios"))
- boarddata->wp_type = ESDHC_WP_GPIO;
-
of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
of_property_read_u32(np, "fsl,tuning-start-tap",
&boarddata->tuning_start_tap);
--
2.34.1
next prev parent reply other threads:[~2023-05-06 7:38 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-06 7:40 [PATCH v2 0/4] cd/wp code clean up for i.MX USDHC haibo.chen
2023-05-06 7:40 ` [PATCH v2 1/4] mmc: sdhci-esdhc-imx: remove unused enum cd_types haibo.chen
2023-05-19 10:37 ` Adrian Hunter
2023-05-06 7:40 ` haibo.chen [this message]
2023-05-19 10:36 ` [PATCH v2 2/4] mmc: sdhci-esdhc-imx: remove redundant write protect code Adrian Hunter
2023-06-01 7:50 ` Bough Chen
2023-05-06 7:40 ` [PATCH v2 3/4] dt-bindings: mmc: fsl-imx-esdhc: remove property "fsl,wp-controller" haibo.chen
2023-05-06 10:59 ` Krzysztof Kozlowski
2023-05-23 2:03 ` Peng Fan
2023-06-08 17:44 ` Rob Herring
2023-05-06 7:40 ` [PATCH v2 4/4] arm: dts: imx: remove "fsl,wp-controller" since it is dropped haibo.chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230506074037.522961-3-haibo.chen@nxp.com \
--to=haibo.chen@nxp.com \
--cc=adrian.hunter@intel.com \
--cc=cniedermaier@dh-electronics.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@dh-electronics.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-imx@nxp.com \
--cc=linux-mmc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).