From: Walker Chen <walker.chen@starfivetech.com>
To: Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Walker Chen <walker.chen@starfivetech.com>
Cc: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>
Subject: [PATCH v3 3/3] riscv: dts: starfive: add tdm node and sound card
Date: Sat, 6 May 2023 17:01:16 +0800 [thread overview]
Message-ID: <20230506090116.9206-4-walker.chen@starfivetech.com> (raw)
In-Reply-To: <20230506090116.9206-1-walker.chen@starfivetech.com>
Add the tdm controller node and sound card for the StarFive JH7110 SoC.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
---
arch/riscv/boot/dts/starfive/Makefile | 3 +
.../jh7110-starfive-visionfive-2-wm8960.dtso | 70 +++++++++++++++++++
.../jh7110-starfive-visionfive-2.dtsi | 40 +++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 21 ++++++
4 files changed, 134 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 170956846d49..644cc29b5be3 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -4,3 +4,6 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+jh7110-starfive-visionfive-2-wm8960-dtbs := jh7110-starfive-visionfive-2-v1.3b.dtb jh7110-starfive-visionfive-2-wm8960.dtbo
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-wm8960.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso
new file mode 100644
index 000000000000..67897f000883
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ * Author: Walker Chen <walker.chen@starfivetech.com>
+ *
+ * Requires ReSpeaker 2-Mics Pi HAT plugged in 40-pin GPIO header.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+ compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
+
+ wm8960_mclk: wm8960-mclk {
+ compatible = "fixed-clock";
+ clock-output-names = "wm8960_mclk";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ simple-audio-card,name = "Starfive-TDM-Sound-Card";
+ simple-audio-card,widgets = "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing = "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Speaker", "SPK_LP",
+ "Speaker", "SPK_LN",
+ "LINPUT1", "Mic Jack",
+ "LINPUT3", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "RINPUT2", "Mic Jack";
+
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
+ format = "dsp_a";
+ bitclock-master = <&dailink_master>;
+ frame-master = <&dailink_master>;
+
+ cpu {
+ sound-dai = <&tdm>;
+ };
+ dailink_master: codec {
+ sound-dai = <&wm8960>;
+ clocks = <&wm8960_mclk>;
+ };
+ };
+ };
+};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8960: codec@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ wlf,shared-lrclk;
+ #sound-dai-cells = <0>;
+ };
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..19b5954ee72d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -214,6 +214,40 @@
slew-rate = <0>;
};
};
+
+ tdm0_pins: tdm0-pins {
+ tdm0-pins-tx {
+ pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+ GPOEN_ENABLE,
+ GPI_NONE)>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ tdm0-pins-rx {
+ pinmux = <GPIOMUX(61, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_RXD)>;
+ input-enable;
+ };
+
+ tdm0-pins-sync {
+ pinmux = <GPIOMUX(63, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_SYNC)>;
+ input-enable;
+ };
+
+ tdm0-pins-pcmclk {
+ pinmux = <GPIOMUX(38, GPOUT_HIGH,
+ GPOEN_DISABLE,
+ GPI_SYS_TDM_CLK)>;
+ input-enable;
+ };
+ };
};
&uart0 {
@@ -221,3 +255,9 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&tdm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&tdm0_pins>;
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 866313570a7e..cfda6fb0d91b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -366,6 +366,27 @@
status = "disabled";
};
+ tdm: tdm@10090000 {
+ compatible = "starfive,jh7110-tdm";
+ reg = <0x0 0x10090000 0x0 0x1000>;
+ clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+ <&syscrg JH7110_SYSCLK_TDM_APB>,
+ <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+ <&syscrg JH7110_SYSCLK_TDM_TDM>,
+ <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+ <&tdm_ext>;
+ clock-names = "tdm_ahb", "tdm_apb",
+ "tdm_internal", "tdm",
+ "mclk_inner", "tdm_ext";
+ resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+ <&syscrg JH7110_SYSRST_TDM_APB>,
+ <&syscrg JH7110_SYSRST_TDM_CORE>;
+ dmas = <&dma 20>, <&dma 21>;
+ dma-names = "rx","tx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
stgcrg: clock-controller@10230000 {
compatible = "starfive,jh7110-stgcrg";
reg = <0x0 0x10230000 0x0 0x10000>;
--
2.17.1
next prev parent reply other threads:[~2023-05-06 9:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-06 9:01 [PATCH v3 0/3] Add TDM audio on StarFive JH7110 Walker Chen
2023-05-06 9:01 ` [PATCH v3 1/3] dt-bindings: sound: Add TDM for " Walker Chen
2023-05-08 1:30 ` Mark Brown
2023-05-08 2:44 ` Walker Chen
2023-05-06 9:01 ` [PATCH v3 2/3] ASoC: starfive: Add JH7110 TDM driver Walker Chen
2023-05-06 13:47 ` Shengyu Qu
2023-05-08 0:09 ` Mark Brown
2023-05-08 1:41 ` Walker Chen
2023-05-09 4:33 ` Claudiu.Beznea
2023-05-09 7:07 ` Walker Chen
2023-05-06 9:01 ` Walker Chen [this message]
2023-05-09 12:52 ` [PATCH v3 3/3] riscv: dts: starfive: add tdm node and sound card Walker Chen
2023-05-09 18:05 ` Conor Dooley
2023-05-10 8:33 ` Emil Renner Berthing
2023-05-10 9:21 ` Walker Chen
2023-05-10 20:22 ` Conor Dooley
2023-05-11 3:21 ` Walker Chen
2023-05-11 5:10 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230506090116.9206-4-walker.chen@starfivetech.com \
--to=walker.chen@starfivetech.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).