Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node

[Varadarajan Narayanan <quic_varada@quicinc.com>]

On Fri, May 05, 2023 at 12:29:54PM +0300, Dmitry Baryshkov wrote:
> On Fri, 5 May 2023 at 11:23, Varadarajan Narayanan
> <quic_varada@quicinc.com> wrote:
> >
> > Add LDO regulator node
>
> As this LDO is provided by the PMIC, it would be nice to know why it
> is modelled as an always-on regulator instead of the proper PMIC
> regulator. Up to now we were doing this only for the outstanding power
> rails like CX/MX or EBI.

These are always ON because USB phy doesn't support power
collapse, and there is a chance that other IP blocks might be
sharing the rail.

Thanks
Varada

> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> >  Changes in v10:
> >         - Add LDO regulator node
> > ---
> >  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > index bdc1434..1f5d14f 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > @@ -60,6 +60,13 @@
> >                         regulator-min-microvolt = <725000>;
> >                         regulator-max-microvolt = <1075000>;
> >                 };
> > +
> > +               mp5496_l2: l2 {
> > +                       regulator-min-microvolt = <1800000>;
> > +                       regulator-max-microvolt = <1800000>;
> > +                       regulator-boot-on;
> > +                       regulator-always-on;
> > +               };
> >         };
> >  };
> >
> > --
> > 2.7.4
> >
>
>
> --
> With best wishes
> Dmitry