devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mike Looijmans <mike.looijmans@topic.nl>
To: devicetree@vger.kernel.org, linux-usb@vger.kernel.org
Cc: Mike Looijmans <mike.looijmans@topic.nl>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] dt-bindings: usb: misc: Add microchip USB5807 HUB driver
Date: Tue, 9 May 2023 09:46:20 +0200	[thread overview]
Message-ID: <20230509074621.29774-1-mike.looijmans@topic.nl> (raw)
In-Reply-To: 1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.73717b19-477a-47ab-9efb-48f096304ca8@emailsignatures365.codetwo.com

The USB5807 is a 7-port USB 3.1 hub that can be configured by I2C.
This driver resets the chip, optionally allows D+/D- lines to be
swapped in the devicetree config, and then sends an ATTACH command to
put the device in operational mode.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>

---

 .../devicetree/bindings/usb/usb5807.yaml      | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/usb5807.yaml

diff --git a/Documentation/devicetree/bindings/usb/usb5807.yaml b/Documentation/devicetree/bindings/usb/usb5807.yaml
new file mode 100644
index 000000000000..06b94210c281
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb5807.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb5807.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip USB 3.1 SuperSpeed Hub Controller
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - microchip,usb5807
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: |
+      Should specify the gpio for hub reset
+
+  swap-dx-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Specifies the ports which will swap the differential-pair (D+/D-),
+      default is not-swapped.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usb-hub@2d {
+        compatible = "microchip,usb5807";
+        reg = <0x2d>;
+        reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+        /* Swapped D+/D- on port 0 */
+        swap-dx-lanes = <0>;
+      };
+    };
-- 
2.17.1


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topicproducts.com
W: www.topic.nl

Please consider the environment before printing this e-mail

       reply	other threads:[~2023-05-09  7:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.73717b19-477a-47ab-9efb-48f096304ca8@emailsignatures365.codetwo.com>
2023-05-09  7:46 ` Mike Looijmans [this message]
     [not found]   ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.3007118c-795d-4ecd-9a82-6f1b4cd17152@emailsignatures365.codetwo.com>
2023-05-09  7:46     ` [PATCH 2/2] usb: misc: usb5807: Add driver Mike Looijmans
2023-05-09  8:02   ` [PATCH 1/2] dt-bindings: usb: misc: Add microchip USB5807 HUB driver Krzysztof Kozlowski
2023-05-10 15:04     ` Mike Looijmans

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230509074621.29774-1-mike.looijmans@topic.nl \
    --to=mike.looijmans@topic.nl \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).