devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 0/3] Add the Renesas X9250 potentiometers IIO support
Date: Tue,  9 May 2023 18:08:49 +0200	[thread overview]
Message-ID: <20230509160852.158101-1-herve.codina@bootlin.com> (raw)

Hi,

The Renesas X9250 integrated four digitally controlled potentiometers.
On each potentiometer, the X9250T has a 100 kOhms total resistance and
the X9250U has a 50 kOhms total resistance.

Compare to the previous iteration
  https://lore.kernel.org/linux-kernel/20230421085245.302169-1-herve.codina@bootlin.com/
This v4 series updates the binding, introduced the power-supply
regulators and the write-protect gpio, uses spi_write_then_read(),
removes spi_get_device_id(spi)->name, removes spi_set_drvdata() call.

Best regards,
Herve Codina

Changes v3 -> v4
  - Patch 1
    Remove iio.yaml.
    Add 'vcc-supply', 'avp-supply' and 'avn-supply'.
    Add 'wp-gpios'

  - Patch 2
    Get and enable the regulators.
    Manage the write-protect gpio.
    Use spi_write_then_read().
    Remove the unneeded spi_setup() call.
    Get name from field added in struct x9250_cfg instead of
    spi_get_device_id(spi)->name.

  - Patch 3
    No changes

Changes v2 -> v3
  - Patch 1
    Remove the reg property description
    Use 'potentiometer' for the node name in the example.

  - Patch 2 and 3
    No changes

Changes v1 -> v2
  - Patch 1
    No changes

  - Patch 2
    Use a define for the 0x50 value used multiple times.

  - Patch 3
    No changes

Herve Codina (3):
  dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers
  iio: potentiometer: Add support for the Renesas X9250 potentiometers
  MAINTAINERS: add the Renesas X9250 driver entry

 .../iio/potentiometer/renesas,x9250.yaml      |  78 ++++++
 MAINTAINERS                                   |   7 +
 drivers/iio/potentiometer/Kconfig             |  10 +
 drivers/iio/potentiometer/Makefile            |   1 +
 drivers/iio/potentiometer/x9250.c             | 223 ++++++++++++++++++
 5 files changed, 319 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
 create mode 100644 drivers/iio/potentiometer/x9250.c

-- 
2.40.1


             reply	other threads:[~2023-05-09 16:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-09 16:08 Herve Codina [this message]
2023-05-09 16:08 ` [PATCH v4 1/3] dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers Herve Codina
2023-05-09 17:34   ` Krzysztof Kozlowski
2023-05-09 16:08 ` [PATCH v4 2/3] iio: potentiometer: Add support for " Herve Codina
2023-05-13 18:35   ` Jonathan Cameron
2023-05-14 14:32     ` Herve Codina
2023-05-14 17:19       ` Jonathan Cameron
2023-05-15  6:44         ` Herve Codina
2023-05-20 16:30           ` Jonathan Cameron
2023-05-29 15:57             ` andy.shevchenko
2023-06-04 12:57               ` Jonathan Cameron
2023-05-28 22:35   ` andy.shevchenko
2023-05-09 16:08 ` [PATCH v4 3/3] MAINTAINERS: add the Renesas X9250 driver entry Herve Codina
2023-05-13 18:35 ` [PATCH v4 0/3] Add the Renesas X9250 potentiometers IIO support Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230509160852.158101-1-herve.codina@bootlin.com \
    --to=herve.codina@bootlin.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).