[PATCH V4] arm64: dts: add support for C3 based Amlogic AW409

[Xianwei Zhao <xianwei.zhao@amlogic.com>]

Amlogic C3 is an advanced edge AI processor designed for smart IP camera
applications.

Add basic support for the C3 based Amlogic AW409 board, which describes
the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
booting up into the serial console.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
Link: https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
Link: https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com

V3 -> V4: Move Link under the --- before the changelog.
V2 -> V3: Remove '256m' from filename;
          Keep alphabetical order of Makefile.
V1 -> V2: Remove new arch, and use ARCH_MESON;
          Modify node name, and delete superfluous blank line.
---
 arch/arm64/boot/dts/amlogic/Makefile          |  1 +
 .../dts/amlogic/amlogic-c3-c302x-aw409.dts    | 29 +++++++
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
 3 files changed, 116 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cd1c5b04890a..6f61798a109f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
new file mode 100644
index 000000000000..edce8850b338
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C302 aw409 Development Board";
+	compatible = "amlogic,aw409", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x10000000>;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 000000000000..93b335aef605
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,meson-g12a-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+		};
+	};
+};

base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
-- 
2.37.1