From: "Martin Zaťovič" <m.zatovic1@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, gregkh@linuxfoundation.org,
beanhuo@micron.com, nipun.gupta@amd.com,
linus.walleij@linaro.org, mwen@igalia.com, bvanassche@acm.org,
arnd@arndb.de, ogabbay@kernel.org, linux@zary.sk,
jacek.lawrynowicz@linux.intel.com, geert+renesas@glider.be,
benjamin.tissoires@redhat.com, masahiroy@kernel.org,
yangyicong@hisilicon.com, devicetree@vger.kernel.org,
"Martin Zaťovič" <m.zatovic1@gmail.com>,
"Rob Herring" <robh@kernel.org>
Subject: [PATCHv4 1/4] dt-bindings: wiegand: add Wiegand controller common properties
Date: Wed, 10 May 2023 18:22:40 +0200 [thread overview]
Message-ID: <20230510162243.95820-2-m.zatovic1@gmail.com> (raw)
In-Reply-To: <20230510162243.95820-1-m.zatovic1@gmail.com>
Wiegand bus is defined by a Wiegand controller node. This node
can contain one or more device nodes for devices attached to
the controller(it is advised to only connect one device as Wiegand
is a point-to-point bus).
Wiegand controller needs to specify several attributes such as
the pulse length in order to function properly. These attributes
are documented here.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Martin Zaťovič <m.zatovic1@gmail.com>
---
.../bindings/wiegand/wiegand-controller.yaml | 39 +++++++++++++++++++
MAINTAINERS | 5 +++
2 files changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
diff --git a/Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml b/Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
new file mode 100644
index 000000000000..8f36287e4fed
--- /dev/null
+++ b/Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/wiegand/wiegand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wiegand Generic Controller Common Properties
+
+maintainers:
+ - Martin Zaťovič <m.zatovic1@gmail.com>
+
+description:
+ Wiegand busses can be described with a node for the Wiegand controller device
+ and a set of child nodes for each SPI slave on the bus.
+
+properties:
+ $nodename:
+ pattern: "^wiegand(@.*|-[0-9a-f])?$"
+
+ pulse-len-us:
+ description:
+ Length of the low pulse in microseconds.
+
+ interval-len-us:
+ description:
+ Length of a whole bit (both the pulse and the high phase) in microseconds.
+
+ frame-gap-us:
+ description:
+ Length of the last bit of a frame (both the pulse and the high phase) in
+ microseconds.
+
+required:
+ - compatible
+ - pulse-len-us
+ - interval-len-us
+ - frame-gap-us
+
+additionalProperties: true
diff --git a/MAINTAINERS b/MAINTAINERS
index 7e0b87d5aa2e..55602888f084 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22697,6 +22697,11 @@ L: linux-input@vger.kernel.org
S: Maintained
F: drivers/hid/hid-wiimote*
+WIEGAND BUS DRIVER
+M: Martin Zaťovič <m.zatovic1@gmail.com>
+S: Maintained
+F: Documentation/devicetree/bindings/wiegand/wiegand-controller.yaml
+
WILOCITY WIL6210 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
S: Orphan
--
2.40.0
next prev parent reply other threads:[~2023-05-10 16:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-10 16:22 [PATCHv4 0/4] Wiegand bus driver and GPIO bitbanged Wiegand Martin Zaťovič
2023-05-10 16:22 ` Martin Zaťovič [this message]
2023-05-10 16:22 ` [PATCHv4 2/4] wiegand: add Wiegand bus driver Martin Zaťovič
2023-06-22 13:20 ` Andy Shevchenko
2023-05-10 16:22 ` [PATCHv4 3/4] dt-bindings: wiegand: add GPIO bitbanged Wiegand controller Martin Zaťovič
2023-05-10 16:33 ` Conor Dooley
2023-05-11 5:30 ` Krzysztof Kozlowski
2023-05-10 16:22 ` [PATCHv4 4/4] wiegand: add Wiegand GPIO bitbanged controller driver Martin Zaťovič
2023-05-10 20:16 ` kernel test robot
2023-06-22 13:39 ` Andy Shevchenko
2023-06-22 12:36 ` [PATCHv4 0/4] Wiegand bus driver and GPIO bitbanged Wiegand Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230510162243.95820-2-m.zatovic1@gmail.com \
--to=m.zatovic1@gmail.com \
--cc=arnd@arndb.de \
--cc=beanhuo@micron.com \
--cc=benjamin.tissoires@redhat.com \
--cc=bvanassche@acm.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=jacek.lawrynowicz@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@zary.sk \
--cc=masahiroy@kernel.org \
--cc=mwen@igalia.com \
--cc=nipun.gupta@amd.com \
--cc=ogabbay@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox