[PATCH 2/4] clk: qcom: rcg2: Make hw_clk_ctrl toggleable

[Konrad Dybcio <konrad.dybcio@linaro.org>]

Certain SoCs use the HW_CLK_CTRL feature on some of the clocks they
host. This allows the clocks to be turned on automatically when a
downstream branch tries to change rate or config.

Make it togglable so that we can utilize this.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/clk-rcg.h  | 2 ++
 drivers/clk/qcom/clk-rcg2.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 01581f4d2c39..e6d84c8c7989 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -141,6 +141,7 @@ extern const struct clk_ops clk_dyn_rcg_ops;
  * @clkr: regmap clock handle
  * @cfg_off: defines the cfg register offset from the CMD_RCGR + CFG_REG
  * @parked_cfg: cached value of the CFG register for parked RCGs
+ * @hw_clk_ctrl: whether to enable hardware clock control
  */
 struct clk_rcg2 {
 	u32			cmd_rcgr;
@@ -152,6 +153,7 @@ struct clk_rcg2 {
 	struct clk_regmap	clkr;
 	u8			cfg_off;
 	u32			parked_cfg;
+	bool			hw_clk_ctrl;
 };
 
 #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 76551534f10d..e22baf3a7112 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -325,6 +325,8 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f,
 	cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
 	if (rcg->mnd_width && f->n && (f->m != f->n))
 		cfg |= CFG_MODE_DUAL_EDGE;
+	if (rcg->hw_clk_ctrl)
+		cfg |= CFG_HW_CLK_CTRL_MASK;
 
 	*_cfg &= ~mask;
 	*_cfg |= cfg;

-- 
2.40.1