From: Romain Perier <romain.perier@gmail.com>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Daniel Palmer <daniel@0x0f.com>,
Romain Perier <romain.perier@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/3] Add RTC for MStar SSD20xD SoCs
Date: Wed, 17 May 2023 16:41:41 +0200 [thread overview]
Message-ID: <20230517144144.365631-1-romain.perier@gmail.com> (raw)
This patches series adds a new driver for the RTC found in the Mstar
SSD20xD SoCs. It adds a basic rtc driver, the corresponding devicetree
bindings and its documentation.
The rtctest (from selftests) has been passed on this driver, with the
following output:
# rtctest
TAP version 13
1..8
# Starting 8 tests from 1 test cases.
# RUN rtc.date_read ...
# rtctest.c:52:date_read:Current RTC date/time is 17/05/2023 15:58:12.
# OK rtc.date_read
ok 1 rtc.date_read
# RUN rtc.date_read_loop ...
# rtctest.c:95:date_read_loop:Continuously reading RTC time for 30s (with 11ms breaks after every read).
# rtctest.c:122:date_read_loop:Performed 888 RTC time reads.
# OK rtc.date_read_loop
ok 2 rtc.date_read_loop
# RUN rtc.uie_read ...
# rtctest.c:137:uie_read:skip update IRQs not supported.
# OK rtc.uie_read
ok 3 rtc.uie_read
# RUN rtc.uie_select ...
# rtctest.c:166:uie_select:skip update IRQs not supported.
# OK rtc.uie_select
ok 4 rtc.uie_select
# RUN rtc.alarm_alm_set ...
# rtctest.c:214:alarm_alm_set:skip alarms are not supported.
# OK rtc.alarm_alm_set
ok 5 rtc.alarm_alm_set
# RUN rtc.alarm_wkalm_set ...
# rtctest.c:274:alarm_wkalm_set:skip alarms are not supported.
# OK rtc.alarm_wkalm_set
ok 6 rtc.alarm_wkalm_set
# RUN rtc.alarm_alm_set_minute ...
# rtctest.c:324:alarm_alm_set_minute:skip alarms are not supported.
# OK rtc.alarm_alm_set_minute
ok 7 rtc.alarm_alm_set_minute
# RUN rtc.alarm_wkalm_set_minute ...
# rtctest.c:384:alarm_wkalm_set_minute:skip alarms are not supported.
# OK rtc.alarm_wkalm_set_minute
ok 8 rtc.alarm_wkalm_set_minute
# PASSED: 8 / 8 tests passed.
# Totals: pass:8 fail:0 xfail:0 xpass:0 skip:0 error:0
Romain Perier (3):
rtc: Add support for the SSD20xD RTC
dt-bindings: rtc: Add Mstar SSD20xD RTC devicetree bindings
documentation
ARM: dts: mstar: Enable rtc for SSD20xD
.../bindings/rtc/mstar,ssd20xd-rtc.yaml | 37 +++
arch/arm/boot/dts/mstar-infinity2m.dtsi | 5 +
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-ssd20xd.c | 249 ++++++++++++++++++
5 files changed, 303 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/mstar,ssd20xd-rtc.yaml
create mode 100644 drivers/rtc/rtc-ssd20xd.c
--
2.39.2
next reply other threads:[~2023-05-17 14:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 14:41 Romain Perier [this message]
2023-05-17 14:41 ` [PATCH 1/3] rtc: Add support for the SSD20xD RTC Romain Perier
2023-05-29 22:40 ` Alexandre Belloni
2023-05-29 23:06 ` Daniel Palmer
2023-05-17 14:41 ` [PATCH 2/3] dt-bindings: rtc: Add Mstar SSD20xD RTC devicetree bindings documentation Romain Perier
2023-05-17 17:44 ` Conor Dooley
2023-05-22 6:47 ` Romain Perier
2023-05-22 7:16 ` Conor Dooley
2023-05-18 8:24 ` Krzysztof Kozlowski
2023-05-22 11:27 ` Romain Perier
2023-05-30 8:01 ` Krzysztof Kozlowski
2023-05-30 23:12 ` Daniel Palmer
2023-05-31 6:49 ` Krzysztof Kozlowski
2023-05-31 22:26 ` Daniel Palmer
2023-05-17 14:41 ` [PATCH 3/3] ARM: dts: mstar: Enable rtc for SSD20xD Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230517144144.365631-1-romain.perier@gmail.com \
--to=romain.perier@gmail.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=daniel@0x0f.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).