From: Dylan Van Assche <me@dylanvanassche.be>
To: agross@kernel.org, andersson@kernel.org,
konrad.dybcio@linaro.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org, amartinz@shiftphones.com,
Dylan Van Assche <me@dylanvanassche.be>
Subject: [PATCH 1/2] arm64: dts: qcom: pmi8998: add flash LED
Date: Wed, 17 May 2023 20:21:32 +0200 [thread overview]
Message-ID: <20230517182133.72590-2-me@dylanvanassche.be> (raw)
In-Reply-To: <20230517182133.72590-1-me@dylanvanassche.be>
Qualcomm PMIC PMI8998 has a 3 channel flash LED driver which is used
by many phones for 1 or 2 flash LEDs. Each LED can be used in flash mode
or torch mode. Add the flash LED node to PMI8998 DTS.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index ffe587f281d8..89f959353ad5 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -60,6 +60,12 @@ pmi8998_lpg: pwm {
status = "disabled";
};
+ pmi8998_flash: led-controller@d300 {
+ compatible = "qcom,spmi-flash-led";
+ reg = <0xd300>;
+ status = "disabled";
+ };
+
pmi8998_wled: leds@d800 {
compatible = "qcom,pmi8998-wled";
reg = <0xd800>, <0xd900>;
--
2.40.1
next prev parent reply other threads:[~2023-05-17 18:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-17 18:21 [PATCH 0/2] arm64: dts: qcom: pmi8998: add and enable flash LED Dylan Van Assche
2023-05-17 18:21 ` Dylan Van Assche [this message]
2023-05-17 19:07 ` [PATCH 1/2] arm64: dts: qcom: pmi8998: add " Krzysztof Kozlowski
2023-05-17 18:21 ` [PATCH 2/2] arm64: dts: qcom: sdm845-shift-axolotl: enable " Dylan Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230517182133.72590-2-me@dylanvanassche.be \
--to=me@dylanvanassche.be \
--cc=agross@kernel.org \
--cc=amartinz@shiftphones.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).