From: Jisheng Zhang <jszhang@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>, Guo Ren <guoren@kernel.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, Yangtao Li <frank.li@vivo.com>,
Wei Fu <wefu@redhat.com>, Icenowy Zheng <uwu@icenowy.me>
Subject: [PATCH v2 7/9] riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
Date: Fri, 19 May 2023 02:45:39 +0800 [thread overview]
Message-ID: <20230518184541.2627-8-jszhang@kernel.org> (raw)
In-Reply-To: <20230518184541.2627-1-jszhang@kernel.org>
Sipeed's Lichee Pi 4A development board uses Lichee Module 4A core
module which is powered by T-HEAD's TH1520 SoC. Add minimal device
tree files for the core module and the development board.
Support basic uart/gpio/dmac drivers, so supports booting to a basic
shell.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/thead/Makefile | 2 +
.../dts/thead/th1520-lichee-module-4a.dtsi | 38 +++++++++++++++++++
.../boot/dts/thead/th1520-lichee-pi-4a.dts | 32 ++++++++++++++++
4 files changed, 73 insertions(+)
create mode 100644 arch/riscv/boot/dts/thead/Makefile
create mode 100644 arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
create mode 100644 arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index f0d9f89054f8..1e884868ccba 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -2,6 +2,7 @@
subdir-y += allwinner
subdir-y += sifive
subdir-y += starfive
+subdir-y += thead
subdir-y += canaan
subdir-y += microchip
subdir-y += renesas
diff --git a/arch/riscv/boot/dts/thead/Makefile b/arch/riscv/boot/dts/thead/Makefile
new file mode 100644
index 000000000000..e311fc9a5939
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_THEAD) += th1520-lichee-pi-4a.dtb
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
new file mode 100644
index 000000000000..4b0249ac710f
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "th1520.dtsi"
+
+/ {
+ model = "Sipeed Lichee Module 4A";
+ compatible = "sipeed,lichee-module-4a", "thead,th1520";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x2 0x00000000>;
+ };
+};
+
+&osc {
+ clock-frequency = <24000000>;
+};
+
+&osc_32k {
+ clock-frequency = <32768>;
+};
+
+&apb_clk {
+ clock-frequency = <62500000>;
+};
+
+&uart_sclk {
+ clock-frequency = <100000000>;
+};
+
+&dmac0 {
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
new file mode 100644
index 000000000000..a1248b2ee3a3
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include "th1520-lichee-module-4a.dtsi"
+
+/ {
+ model = "Sipeed Lichee Pi 4A";
+ compatible = "sipeed,lichee-pi-4a", "sipeed,lichee-module-4a", "thead,th1520";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--
2.40.0
next prev parent reply other threads:[~2023-05-18 18:57 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 18:45 [PATCH v2 0/9] Add Sipeed Lichee Pi 4A RISC-V board support Jisheng Zhang
2023-05-18 18:45 ` [PATCH v2 1/9] dt-bindings: interrupt-controller: Add T-HEAD's TH1520 PLIC Jisheng Zhang
2023-05-18 19:36 ` Conor Dooley
2023-05-21 13:14 ` Guo Ren
2023-05-18 18:45 ` [PATCH v2 2/9] dt-bindings: timer: Add T-HEAD TH1520 clint Jisheng Zhang
2023-05-18 19:37 ` Conor Dooley
2023-05-18 18:45 ` [PATCH v2 3/9] dt-bindings: riscv: Add T-HEAD TH1520 board compatibles Jisheng Zhang
2023-05-18 19:40 ` Conor Dooley
2023-05-19 15:50 ` Icenowy Zheng
2023-05-18 18:45 ` [PATCH v2 4/9] dt-binding: riscv: add T-HEAD CPU reset Jisheng Zhang
2023-05-18 19:39 ` Rob Herring
2023-05-18 19:53 ` Conor Dooley
2023-05-22 2:16 ` Guo Ren
2023-05-22 7:09 ` Conor Dooley
2023-05-22 7:42 ` Guo Ren
2023-05-30 12:55 ` Krzysztof Kozlowski
2023-05-18 18:45 ` [PATCH v2 5/9] riscv: Add the T-HEAD SoC family Kconfig option Jisheng Zhang
2023-05-18 19:42 ` Conor Dooley
2023-05-18 18:45 ` [PATCH v2 6/9] riscv: dts: add initial T-HEAD TH1520 SoC device tree Jisheng Zhang
2023-05-18 21:02 ` Conor Dooley
2023-05-26 2:21 ` Yixun Lan
2023-05-18 18:45 ` Jisheng Zhang [this message]
2023-05-18 21:03 ` [PATCH v2 7/9] riscv: dts: thead: add sipeed Lichee Pi 4A board " Conor Dooley
2023-05-18 18:45 ` [PATCH v2 8/9] MAINTAINERS: add entry for T-HEAD RISC-V SoC Jisheng Zhang
2023-05-18 20:57 ` Conor Dooley
2023-05-18 18:45 ` [PATCH v2 9/9] riscv: defconfig: enable T-HEAD SoC Jisheng Zhang
2023-05-18 20:58 ` Conor Dooley
2023-05-19 20:56 ` Palmer Dabbelt
2023-05-20 1:16 ` Guo Ren
2023-05-26 2:19 ` [PATCH v2 0/9] Add Sipeed Lichee Pi 4A RISC-V board support Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230518184541.2627-8-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank.li@vivo.com \
--cc=guoren@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=uwu@icenowy.me \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).