From: Tony Lindgren <tony@atomide.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH] arm64: dts: Unify pinctrl-single pin group nodes for stingray
Date: Fri, 19 May 2023 10:25:21 +0300 [thread overview]
Message-ID: <20230519072522.52263-1-tony@atomide.com> (raw)
We want to unify the pinctrl-single pin group nodes as these will add
make dtbs checks errors when pinctrl-single yaml binding is merged.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
.../broadcom/stingray/stingray-pinctrl.dtsi | 44 +++++++++----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -56,14 +56,14 @@ range: gpio-range {
};
/* pinctrl functions */
- tsio_pins: pinmux_gpio_14 {
+ tsio_pins: gpio-14-pins {
pinctrl-single,pins = <
0x038 MODE_NITRO /* tsio_0 */
0x03c MODE_NITRO /* tsio_1 */
>;
};
- nor_pins: pinmux_pnor_adv_n {
+ nor_pins: pnor-adv-n-pins {
pinctrl-single,pins = <
0x0ac MODE_PNOR /* nand_ce1_n */
0x0b0 MODE_PNOR /* nand_ce0_n */
@@ -119,7 +119,7 @@ nor_pins: pinmux_pnor_adv_n {
>;
};
- nand_pins: pinmux_nand_ce1_n {
+ nand_pins: nand-ce1-n-pins {
pinctrl-single,pins = <
0x0ac MODE_NAND /* nand_ce1_n */
0x0b0 MODE_NAND /* nand_ce0_n */
@@ -148,59 +148,59 @@ nand_pins: pinmux_nand_ce1_n {
>;
};
- pwm0_pins: pinmux_pwm_0 {
+ pwm0_pins: pwm-0-pins {
pinctrl-single,pins = <
0x10c MODE_NITRO
>;
};
- pwm1_pins: pinmux_pwm_1 {
+ pwm1_pins: pwm-1-pins {
pinctrl-single,pins = <
0x110 MODE_NITRO
>;
};
- pwm2_pins: pinmux_pwm_2 {
+ pwm2_pins: pwm-2-pins {
pinctrl-single,pins = <
0x114 MODE_NITRO
>;
};
- pwm3_pins: pinmux_pwm_3 {
+ pwm3_pins: pwm-3-pins {
pinctrl-single,pins = <
0x118 MODE_NITRO
>;
};
- dbu_rxd_pins: pinmux_uart1_sin_nitro {
+ dbu_rxd_pins: uart1-sin-nitro-pins {
pinctrl-single,pins = <
0x11c MODE_NITRO /* dbu_rxd */
0x120 MODE_NITRO /* dbu_txd */
>;
};
- uart1_pins: pinmux_uart1_sin_nand {
+ uart1_pins: uart1-sin-nand-pins {
pinctrl-single,pins = <
0x11c MODE_NAND /* uart1_sin */
0x120 MODE_NAND /* uart1_out */
>;
};
- uart2_pins: pinmux_uart2_sin {
+ uart2_pins: uart2-sin-pins {
pinctrl-single,pins = <
0x124 MODE_NITRO /* uart2_sin */
0x128 MODE_NITRO /* uart2_out */
>;
};
- uart3_pins: pinmux_uart3_sin {
+ uart3_pins: uart3-sin-pins {
pinctrl-single,pins = <
0x12c MODE_NITRO /* uart3_sin */
0x130 MODE_NITRO /* uart3_out */
>;
};
- i2s_pins: pinmux_i2s_bitclk {
+ i2s_pins: i2s-bitclk-pins {
pinctrl-single,pins = <
0x134 MODE_NITRO /* i2s_bitclk */
0x138 MODE_NITRO /* i2s_sdout */
@@ -229,21 +229,21 @@ mdio_pins: pinumx_ext_mdio {
>;
};
- i2c0_pins: pinmux_i2c0_sda {
+ i2c0_pins: i2c0-sda-pins {
pinctrl-single,pins = <
0x16c MODE_NITRO /* i2c0_sda */
0x170 MODE_NITRO /* i2c0_scl */
>;
};
- i2c1_pins: pinmux_i2c1_sda {
+ i2c1_pins: i2c1-sda-pins {
pinctrl-single,pins = <
0x174 MODE_NITRO /* i2c1_sda */
0x178 MODE_NITRO /* i2c1_scl */
>;
};
- sdio0_pins: pinmux_sdio0_cd_l {
+ sdio0_pins: sdio0-cd-l-pins {
pinctrl-single,pins = <
0x17c MODE_NITRO /* sdio0_cd_l */
0x180 MODE_NITRO /* sdio0_clk_sdcard */
@@ -262,7 +262,7 @@ sdio0_pins: pinmux_sdio0_cd_l {
>;
};
- sdio1_pins: pinmux_sdio1_cd_l {
+ sdio1_pins: sdio1-cd-l-pins {
pinctrl-single,pins = <
0x1b4 MODE_NITRO /* sdio1_cd_l */
0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
@@ -281,7 +281,7 @@ sdio1_pins: pinmux_sdio1_cd_l {
>;
};
- spi0_pins: pinmux_spi0_sck_nand {
+ spi0_pins: spi0-sck-nand-pins {
pinctrl-single,pins = <
0x1ec MODE_NITRO /* spi0_sck */
0x1f0 MODE_NITRO /* spi0_rxd */
@@ -290,7 +290,7 @@ spi0_pins: pinmux_spi0_sck_nand {
>;
};
- spi1_pins: pinmux_spi1_sck_nand {
+ spi1_pins: spi1-sck-nand-pins {
pinctrl-single,pins = <
0x1fc MODE_NITRO /* spi1_sck */
0x200 MODE_NITRO /* spi1_rxd */
@@ -299,7 +299,7 @@ spi1_pins: pinmux_spi1_sck_nand {
>;
};
- nuart_pins: pinmux_uart0_sin_nitro {
+ nuart_pins: uart0-sin-nitro-pins {
pinctrl-single,pins = <
0x20c MODE_NITRO /* nuart_rxd */
0x210 MODE_NITRO /* nuart_txd */
@@ -319,7 +319,7 @@ uart0_pins: pinumux_uart0_sin_nand {
>;
};
- drdu2_pins: pinmux_drdu2_overcurrent {
+ drdu2_pins: drdu2-overcurrent-pins {
pinctrl-single,pins = <
0x22c MODE_NITRO /* drdu2_overcurrent */
0x230 MODE_NITRO /* drdu2_vbus_ppc */
@@ -328,7 +328,7 @@ drdu2_pins: pinmux_drdu2_overcurrent {
>;
};
- drdu3_pins: pinmux_drdu3_overcurrent {
+ drdu3_pins: drdu3-overcurrent-pins {
pinctrl-single,pins = <
0x23c MODE_NITRO /* drdu3_overcurrent */
0x240 MODE_NITRO /* drdu3_vbus_ppc */
@@ -337,7 +337,7 @@ drdu3_pins: pinmux_drdu3_overcurrent {
>;
};
- usb3h_pins: pinmux_usb3h_overcurrent {
+ usb3h_pins: usb3h-overcurrent-pins {
pinctrl-single,pins = <
0x24c MODE_NITRO /* usb3h_overcurrent */
0x250 MODE_NITRO /* usb3h_vbus_ppc */
--
2.40.1
next reply other threads:[~2023-05-19 7:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 7:25 Tony Lindgren [this message]
2023-05-19 11:16 ` [PATCH] arm64: dts: Unify pinctrl-single pin group nodes for stingray Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230519072522.52263-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=olof@lixom.net \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).