From: <marius.cristea@microchip.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <robh+dt@kernel.org>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <marius.cristea@microchip.com>
Subject: [PATCH 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
Date: Fri, 19 May 2023 19:01:44 +0300 [thread overview]
Message-ID: <20230519160145.44208-2-marius.cristea@microchip.com> (raw)
In-Reply-To: <20230519160145.44208-1-marius.cristea@microchip.com>
From: Marius Cristea <marius.cristea@microchip.com>
This is the device tree schema for iio driver for
Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
Delta-Sigma ADCs with an SPI interface.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
---
.../bindings/iio/adc/microchip,mcp3564.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
new file mode 100644
index 000000000000..407a125e3776
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP346X and MCP356X ADC Family
+
+maintainers:
+ - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+ Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
+ Delta-Sigma ADCs with an SPI interface.
+
+properties:
+ compatible:
+ enum:
+ - microchip,mcp3461
+ - microchip,mcp3462
+ - microchip,mcp3464
+ - microchip,mcp3461r
+ - microchip,mcp3462r
+ - microchip,mcp3464r
+ - microchip,mcp3561
+ - microchip,mcp3562
+ - microchip,mcp3564
+ - microchip,mcp3561r
+ - microchip,mcp3562r
+ - microchip,mcp3564r
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ vref-supply:
+ description:
+ Some devices have a specific reference voltage supplied on a different
+ pin to the other supplies. Needed to be able to establish channel scaling
+ unless there is also an internal reference available (e.g. mcp3564r)
+
+ microchip,hw-device-address:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 3
+ description:
+ The address is set on a per-device basis by fuses in the factory,
+ configured on request. If not requested, the fuses are set for 0x1.
+ The device address is part of the device markings to avoid
+ potential confusion. This address is coded on two bits, so four possible
+ addresses are available when multiple devices are present on the same
+ SPI bus with only one Chip Select line for all devices.
+
+ "#io-channel-cells":
+ const: 1
+
+dependencies:
+ spi-cpol: [ spi-cpha ]
+ spi-cpha: [ spi-cpol ]
+
+required:
+ - compatible
+ - microchip,hw-device-address
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "microchip,mcp3564r";
+ reg = <0>;
+ vref-supply = <&vref_reg>;
+ spi-cpha;
+ spi-cpol;
+ spi-max-frequency = <10000000>;
+ microchip,hw-device-address = <1>;
+ };
+ };
+...
--
2.34.1
next prev parent reply other threads:[~2023-05-19 16:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-19 16:01 [PATCH 0/2] Adding support for Microchip MCP3564 ADC family marius.cristea
2023-05-19 16:01 ` marius.cristea [this message]
2023-05-19 18:29 ` [PATCH 1/2] dt-bindings: iio: adc: adding MCP3564 ADC Conor Dooley
2023-05-20 15:17 ` Jonathan Cameron
2023-06-08 19:34 ` Rob Herring
2023-06-09 17:41 ` Jonathan Cameron
2023-05-20 13:20 ` Jonathan Cameron
2023-05-24 10:37 ` Mike Looijmans
2023-05-28 19:16 ` Jonathan Cameron
2023-05-19 16:01 ` [PATCH 2/2] iio: adc: adding support for " marius.cristea
2023-05-20 15:15 ` Jonathan Cameron
2023-06-22 11:32 ` Marius.Cristea
2023-07-02 10:28 ` Jonathan Cameron
2023-05-24 11:05 ` Mike Looijmans
2023-05-28 19:20 ` Jonathan Cameron
2023-06-20 14:34 ` Mike Looijmans
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230519160145.44208-2-marius.cristea@microchip.com \
--to=marius.cristea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).