[PATCH v3 11/11] arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 595533aeafc4..44a67c9274bd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -741,9 +741,9 @@ gcc: clock-controller@100000 {
 				 <&pcie0_lane>,
 				 <&pcie1_lane>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
 			clock-names = "bi_tcxo",
 				      "sleep_clk",
@@ -4064,7 +4064,7 @@ ufs_mem_hc: ufshc@1d84000 {
 			      <0 0x01d88000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -4114,10 +4114,8 @@ ufs_mem_hc: ufshc@1d84000 {
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sm8450-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref", "ref_aux", "qref";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -4125,17 +4123,11 @@ ufs_mem_phy: phy@1d87000 {
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy@1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		sdhc_2: mmc@8804000 {
-- 
2.39.2