devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	Chen-Yu Tsai <wenst@chromium.org>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Inki Dae <inki.dae@samsung.com>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Marek Vasut <marex@denx.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V8 2/7] drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
Date: Thu, 25 May 2023 22:05:54 -0500	[thread overview]
Message-ID: <20230526030559.326566-3-aford173@gmail.com> (raw)
In-Reply-To: <20230526030559.326566-1-aford173@gmail.com>

According to Table 13-45 of the i.MX8M Mini Reference Manual, the min
and max values for M and the frequency range for the VCO_out
calculator were incorrect.  This information was contradicted in other
parts of the mini, nano and plus manuals.  After reaching out to my
NXP Rep, when confronting him about discrepencies in the Nano manual,
he responded with:
 "Yes it is definitely wrong, the one that is part
  of the NOTE in MIPI_DPHY_M_PLLPMS register table against PMS_P,
  PMS_M and PMS_S is not correct. I will report this to Doc team,
  the one customer should be take into account is the Table 13-40
  DPHY PLL Parameters and the Note above."

These updated values also match what is used in the NXP downstream
kernel.

To fix this, make new variables to hold the min and max values of m
and the minimum value of VCO_out, and update the PMS calculator to
use these new variables instead of using hard-coded values to keep
the backwards compatibility with other parts using this driver.

Fixes: 4d562c70c4dc ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
---
 drivers/gpu/drm/bridge/samsung-dsim.c | 22 ++++++++++++++++++++--
 include/drm/bridge/samsung-dsim.h     |  3 +++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index a2d1eaf0ed1c..ead922c3ce9f 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -407,6 +407,9 @@ static const struct samsung_dsim_driver_data exynos3_dsi_driver_data = {
 	.num_bits_resol = 11,
 	.pll_p_offset = 13,
 	.reg_values = reg_values,
+	.m_min = 41,
+	.m_max = 125,
+	.min_freq = 500,
 };
 
 static const struct samsung_dsim_driver_data exynos4_dsi_driver_data = {
@@ -420,6 +423,9 @@ static const struct samsung_dsim_driver_data exynos4_dsi_driver_data = {
 	.num_bits_resol = 11,
 	.pll_p_offset = 13,
 	.reg_values = reg_values,
+	.m_min = 41,
+	.m_max = 125,
+	.min_freq = 500,
 };
 
 static const struct samsung_dsim_driver_data exynos5_dsi_driver_data = {
@@ -431,6 +437,9 @@ static const struct samsung_dsim_driver_data exynos5_dsi_driver_data = {
 	.num_bits_resol = 11,
 	.pll_p_offset = 13,
 	.reg_values = reg_values,
+	.m_min = 41,
+	.m_max = 125,
+	.min_freq = 500,
 };
 
 static const struct samsung_dsim_driver_data exynos5433_dsi_driver_data = {
@@ -443,6 +452,9 @@ static const struct samsung_dsim_driver_data exynos5433_dsi_driver_data = {
 	.num_bits_resol = 12,
 	.pll_p_offset = 13,
 	.reg_values = exynos5433_reg_values,
+	.m_min = 41,
+	.m_max = 125,
+	.min_freq = 500,
 };
 
 static const struct samsung_dsim_driver_data exynos5422_dsi_driver_data = {
@@ -455,6 +467,9 @@ static const struct samsung_dsim_driver_data exynos5422_dsi_driver_data = {
 	.num_bits_resol = 12,
 	.pll_p_offset = 13,
 	.reg_values = exynos5422_reg_values,
+	.m_min = 41,
+	.m_max = 125,
+	.min_freq = 500,
 };
 
 static const struct samsung_dsim_driver_data imx8mm_dsi_driver_data = {
@@ -471,6 +486,9 @@ static const struct samsung_dsim_driver_data imx8mm_dsi_driver_data = {
 	 */
 	.pll_p_offset = 14,
 	.reg_values = imx8mm_dsim_reg_values,
+	.m_min = 64,
+	.m_max = 1023,
+	.min_freq = 1050,
 };
 
 static const struct samsung_dsim_driver_data *
@@ -549,12 +567,12 @@ static unsigned long samsung_dsim_pll_find_pms(struct samsung_dsim *dsi,
 			tmp = (u64)fout * (_p << _s);
 			do_div(tmp, fin);
 			_m = tmp;
-			if (_m < 41 || _m > 125)
+			if (_m < driver_data->m_min || _m > driver_data->m_max)
 				continue;
 
 			tmp = (u64)_m * fin;
 			do_div(tmp, _p);
-			if (tmp < 500 * MHZ ||
+			if (tmp < driver_data->min_freq  * MHZ ||
 			    tmp > driver_data->max_freq * MHZ)
 				continue;
 
diff --git a/include/drm/bridge/samsung-dsim.h b/include/drm/bridge/samsung-dsim.h
index 6a37d1e079bf..2c20b9460c9a 100644
--- a/include/drm/bridge/samsung-dsim.h
+++ b/include/drm/bridge/samsung-dsim.h
@@ -54,11 +54,14 @@ struct samsung_dsim_driver_data {
 	unsigned int has_freqband:1;
 	unsigned int has_clklane_stop:1;
 	unsigned int num_clks;
+	unsigned int min_freq;
 	unsigned int max_freq;
 	unsigned int wait_for_reset;
 	unsigned int num_bits_resol;
 	unsigned int pll_p_offset;
 	const unsigned int *reg_values;
+	u16 m_min;
+	u16 m_max;
 };
 
 struct samsung_dsim_host_ops {
-- 
2.39.2


  parent reply	other threads:[~2023-05-26  3:06 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-26  3:05 [PATCH V8 0/7] drm: bridge: samsung-dsim: Support variable clocking Adam Ford
2023-05-26  3:05 ` [PATCH V8 1/7] drm: bridge: samsung-dsim: fix blanking packet size calculation Adam Ford
2023-05-26  3:05 ` Adam Ford [this message]
2023-05-26  3:05 ` [PATCH V8 3/7] drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically Adam Ford
2023-05-26  3:05 ` [PATCH V8 4/7] drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY Adam Ford
2023-05-26  3:05 ` [PATCH V8 5/7] drm: bridge: samsung-dsim: Dynamically configure DPHY timing Adam Ford
2023-05-26  3:05 ` [PATCH V8 6/7] drm: bridge: samsung-dsim: Support non-burst mode Adam Ford
2023-05-26  3:05 ` [PATCH V8 7/7] dt-bindings: bridge: samsung-dsim: Make some flags optional Adam Ford
2023-05-26 18:19   ` Conor Dooley
2023-05-26 19:24     ` Adam Ford
2023-05-26 19:30       ` Conor Dooley
2023-05-30  7:48         ` Krzysztof Kozlowski
2023-05-26  7:22 ` [PATCH V8 0/7] drm: bridge: samsung-dsim: Support variable clocking Neil Armstrong
2023-05-26  7:24   ` Neil Armstrong
2023-05-26 14:04     ` Adam Ford
2023-05-30  8:01       ` Neil Armstrong
2023-06-07 13:15 ` Rasmus Villemoes
2023-06-07 13:27   ` Adam Ford
2023-06-07 14:23     ` Adam Ford
2023-06-08 11:40     ` Rasmus Villemoes
2023-06-08 12:30       ` Adam Ford
2023-06-08 12:52         ` Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230526030559.326566-3-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=aford@beaconembedded.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=inki.dae@samsung.com \
    --cc=jagan@amarulasolutions.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=marex@denx.de \
    --cc=neil.armstrong@linaro.org \
    --cc=rfoss@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).