Re: [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Thu, May 25, 2023 at 10:36:38PM +0100, Conor Dooley wrote:
> Greg,
> 
> On Thu, May 18, 2023 at 07:27:50PM +0800, Minda Chen wrote:
> > Add USB wrapper layer and Cadence USB3 controller dts
> > configuration for StarFive JH7110 SoC and VisionFive2
> > Board.
> > USB controller connect to PHY, The PHY dts configuration
> > are also added.
> > 
> > Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> 
> > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > index 71a8e9acbe55..b65f06c5b1b7 100644
> > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > @@ -366,6 +366,59 @@
> >  			status = "disabled";
> >  		};
> >  
> > +		usb0: usb@10100000 {
> > +			compatible = "starfive,jh7110-usb";
> > +			ranges = <0x0 0x0 0x10100000 0x100000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +			starfive,stg-syscon = <&stg_syscon 0x4>;
> > +			clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
> 
> Please don't pick this patch, if the rest of the series is applicable,
> as this will break building the dtb as stgcrg does not yet exist in any
> maintainer tree.

Ok, I'll just take patch 6/7 then.

thanks,

greg k-h