From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 932DDC7EE29 for ; Tue, 30 May 2023 10:36:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229910AbjE3KgG (ORCPT ); Tue, 30 May 2023 06:36:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34902 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229741AbjE3KgF (ORCPT ); Tue, 30 May 2023 06:36:05 -0400 Received: from dfw.source.kernel.org (dfw.source.kernel.org [139.178.84.217]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2E42493; Tue, 30 May 2023 03:36:04 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id BDE25622ED; Tue, 30 May 2023 10:36:03 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id B2088C433D2; Tue, 30 May 2023 10:36:02 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=linuxfoundation.org; s=korg; t=1685442963; bh=ZVai/mTaWfY135wWyLAju++agFOOV34SkE1c25xveCs=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=EhKNtA9O9eeCZBKYvyCToCBa93l5OpVA575gmbD/JKdy6STHbYEpPWfC2zxA3SNQd iPNXnyKOPfK7IHeVRpvVtLChXXeYrWKBfudZV1RNamlo8w6YSqIVFndISjI4r+cxap t5JEKSt3uUStWoYByKntvhOGSGOv9gLYcLNZ/qcg= Date: Tue, 30 May 2023 11:36:00 +0100 From: Greg Kroah-Hartman To: Jisheng Zhang Cc: Thomas Gleixner , Marc Zyngier , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Palmer Dabbelt , Paul Walmsley , Albert Ou , Jiri Slaby , linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org, devicetree@vger.kernel.org, linux-serial@vger.kernel.org Subject: Re: [PATCH v4 04/10] serial: bflb_uart: add Bouffalolab UART Driver Message-ID: <2023053010-gondola-luminous-f5e7@gregkh> References: <20230518152244.2178-1-jszhang@kernel.org> <20230518152244.2178-5-jszhang@kernel.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20230518152244.2178-5-jszhang@kernel.org> Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org On Thu, May 18, 2023 at 11:22:38PM +0800, Jisheng Zhang wrote: > Add the driver for Bouffalolab UART IP which is found in Bouffalolab > SoCs such as bl808. New uarts are being created that are NOT 8250-like? Why???? > > UART driver probe will create path named "/dev/ttySx". > > Signed-off-by: Jisheng Zhang > --- > drivers/tty/serial/Kconfig | 18 + > drivers/tty/serial/Makefile | 1 + > drivers/tty/serial/bflb_uart.c | 586 +++++++++++++++++++++++++++++++ > include/uapi/linux/serial_core.h | 3 + > 4 files changed, 608 insertions(+) > create mode 100644 drivers/tty/serial/bflb_uart.c > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index 398e5aac2e77..abc30a0713f5 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -179,6 +179,24 @@ config SERIAL_ATMEL_TTYAT > > Say Y if you have an external 8250/16C550 UART. If unsure, say N. > > +config SERIAL_BFLB > + tristate "Bouffalolab serial port support" > + select SERIAL_CORE > + depends on COMMON_CLK > + help > + This enables the driver for the Bouffalolab's serial. > + > +config SERIAL_BFLB_CONSOLE > + bool "Support for console on Bouffalolab serial port" > + depends on SERIAL_BFLB=y > + select SERIAL_CORE_CONSOLE > + select SERIAL_EARLYCON > + help > + Say Y here if you wish to use a Bouffalolab UART as the > + system console (the system console is the device which > + receives all kernel messages and warnings and which allows > + logins in single user mode) as /dev/ttySn. > + > config SERIAL_KGDB_NMI > bool "Serial console over KGDB NMI debugger port" > depends on KGDB_SERIAL_CONSOLE > diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile > index cd9afd9e3018..5788a708d327 100644 > --- a/drivers/tty/serial/Makefile > +++ b/drivers/tty/serial/Makefile > @@ -25,6 +25,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250/ > > obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o > obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o > +obj-$(CONFIG_SERIAL_BFLB) += bflb_uart.o > obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o > obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o > obj-$(CONFIG_SERIAL_SA1100) += sa1100.o > diff --git a/drivers/tty/serial/bflb_uart.c b/drivers/tty/serial/bflb_uart.c > new file mode 100644 > index 000000000000..3f80bba8599a > --- /dev/null > +++ b/drivers/tty/serial/bflb_uart.c > @@ -0,0 +1,586 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Based on bflb_uart.c, by Bouffalolab team > + * > + * Copyright (C) 2022 Jisheng Zhang It is 2023 :) > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define UART_UTX_CONFIG 0x00 > +#define UART_CR_UTX_EN BIT(0) > +#define UART_CR_UTX_CTS_EN BIT(1) > +#define UART_CR_UTX_FRM_EN BIT(2) > +#define UART_CR_UTX_PRT_EN BIT(4) > +#define UART_CR_UTX_PRT_SEL BIT(5) > +#define UART_CR_UTX_BIT_CNT_D_MSK GENMASK(10, 8) > +#define UART_CR_UTX_BIT_CNT_P_MSK GENMASK(12, 11) > +#define UART_URX_CONFIG 0x04 > +#define UART_CR_URX_EN BIT(0) > +#define UART_CR_URX_PRT_EN BIT(4) > +#define UART_CR_URX_PRT_SEL BIT(5) > +#define UART_CR_URX_BIT_CNT_D_MSK GENMASK(10, 8) > +#define UART_BIT_PRD 0x08 > +#define UART_CR_UTX_BIT_PRD_MSK GENMASK(15, 0) > +#define UART_CR_URX_BIT_PRD_MSK GENMASK(31, 16) > +#define UART_DATA_CONFIG 0x0c > +#define UART_CR_UART_BIT_INV BIT(0) > +#define UART_URX_RTO_TIMER 0x18 > +#define UART_CR_URX_RTO_VALUE_MSK GENMASK(7, 0) > +#define UART_SW_MODE 0x1c > +#define UART_INT_STS 0x20 > +#define UART_UTX_END_INT BIT(0) > +#define UART_URX_END_INT BIT(1) > +#define UART_UTX_FIFO_INT BIT(2) > +#define UART_URX_FIFO_INT BIT(3) > +#define UART_URX_RTO_INT BIT(4) > +#define UART_URX_PCE_INT BIT(5) > +#define UART_UTX_FER_INT BIT(6) > +#define UART_URX_FER_INT BIT(7) > +#define UART_URX_LSE_INT BIT(8) > +#define UART_INT_MASK 0x24 > +#define UART_INT_CLEAR 0x28 > +#define UART_INT_EN 0x2c > +#define UART_STATUS 0x30 > +#define UART_STS_UTX_BUS_BUSY BIT(0) > +#define UART_FIFO_CONFIG_0 0x80 > +#define UART_DMA_TX_EN BIT(0) > +#define UART_DMA_RX_EN BIT(1) > +#define UART_TX_FIFO_CLR BIT(2) > +#define UART_RX_FIFO_CLR BIT(3) > +#define UART_TX_FIFO_OVERFLOW BIT(4) > +#define UART_TX_FIFO_UNDERFLOW BIT(5) > +#define UART_RX_FIFO_OVERFLOW BIT(6) > +#define UART_RX_FIFO_UNDERFLOW BIT(7) > +#define UART_FIFO_CONFIG_1 0x84 > +#define UART_TX_FIFO_CNT_MSK GENMASK(5, 0) > +#define UART_RX_FIFO_CNT_MSK GENMASK(13, 8) > +#define UART_TX_FIFO_TH_MSK GENMASK(20, 16) > +#define UART_RX_FIFO_TH_MSK GENMASK(28, 24) > +#define UART_FIFO_WDATA 0x88 > +#define UART_FIFO_RDATA 0x8c > +#define UART_FIFO_RDATA_MSK GENMASK(7, 0) > + > +#define BFLB_UART_MAXPORTS 8 > +#define BFLB_UART_BAUD 2000000 > +#define BFLB_UART_RX_FIFO_TH 7 > +#define BFLB_UART_TX_FIFO_TH 15 > +#define BFLB_UART_URX_RTO_TIME 0x4f > + > +struct bflb_uart_port { > + struct uart_port port; > + struct clk *clk; > +}; > + > +static struct bflb_uart_port *bflb_uart_ports[BFLB_UART_MAXPORTS]; > + > +static inline u32 rdl(struct uart_port *port, u32 reg) > +{ > + return readl_relaxed(port->membase + reg); > +} > + > +static inline void wrl(struct uart_port *port, u32 reg, u32 value) > +{ > + writel_relaxed(value, port->membase + reg); > +} > + > +static inline void wrb(struct uart_port *port, u32 reg, u8 value) > +{ > + writeb_relaxed(value, port->membase + reg); > +} > + > +static unsigned int bflb_uart_tx_empty(struct uart_port *port) > +{ > + return (rdl(port, UART_FIFO_CONFIG_1) & UART_TX_FIFO_CNT_MSK) ? TIOCSER_TEMT : 0; > +} > + > +static unsigned int bflb_uart_get_mctrl(struct uart_port *port) > +{ > + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; > +} > + > +static void bflb_uart_set_mctrl(struct uart_port *port, unsigned int sigs) > +{ > +} Why is a blank function required here? > --- a/include/uapi/linux/serial_core.h > +++ b/include/uapi/linux/serial_core.h > @@ -279,4 +279,7 @@ > /* Sunplus UART */ > #define PORT_SUNPLUS 123 > > +/* Bouffalolab UART */ > +#define PORT_BFLB 124 Why is this required? What userspace code is going to need this? thanks, greg k-h