From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v1 00/15] Maintenance updates for Protonic Holland boards
Date: Tue, 30 May 2023 14:03:30 +0200 [thread overview]
Message-ID: <20230530120345.2874900-1-o.rempel@pengutronix.de> (raw)
This patchset consists of several updates that address issues on
Protonic Holland's supported i.MX6-based devices, with a particular
focus on the USB subsystem configuration, thermal zones, and the naming
of GPIO keys. Some of these changes include the activation of USB over-
current detection on certain ports, the disabling of unused USB PHY
nodes, fixing USB-related warnings, adding trip points to thermal zones
on several devices, and renaming the 'power' key to meet the necessary
conventions.
David Jander (1):
ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
Oleksij Rempel (11):
ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
node
ARM: dts: imx6dl: Add trip points to thermal zones on several devices
ARM: dts: imx6dl: vicut1: Address USB related warnings
ARM: dts: imx6dl: alti6p: fix different USB related warnings
ARM: dts: imx6dl: prtmvt: fix different USB related warnings
ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
port
ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
port
ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
port
ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
warnings
ARM: dts: imx6qdl: vicut1: rename power to power-button
Robin van der Gracht (3):
ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
MDC
arch/arm/boot/dts/imx6dl-alti6p.dts | 10 +++++++
arch/arm/boot/dts/imx6dl-lanmcu.dts | 9 +++++++
arch/arm/boot/dts/imx6dl-plybas.dts | 2 +-
arch/arm/boot/dts/imx6dl-plym2m.dts | 24 +++++++++++++++++
arch/arm/boot/dts/imx6dl-prtmvt.dts | 11 +++++++-
arch/arm/boot/dts/imx6dl-prtrvt.dts | 4 +++
arch/arm/boot/dts/imx6dl-prtvt7.dts | 28 +++++++++++++++++---
arch/arm/boot/dts/imx6dl-victgo.dts | 24 +++++++++++++++++
arch/arm/boot/dts/imx6q-prtwd2.dts | 3 ---
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 11 +++++++-
arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 19 +++++++++++--
arch/arm/boot/dts/imx6qp-prtwd3.dts | 2 +-
arch/arm/boot/dts/imx6ul-prti6g.dts | 1 +
14 files changed, 137 insertions(+), 13 deletions(-)
--
2.39.2
next reply other threads:[~2023-05-30 12:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 12:03 Oleksij Rempel [this message]
2023-05-30 12:03 ` [PATCH v1 01/15] ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 02/15] ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 03/15] ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 04/15] ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 05/15] ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 06/15] ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 07/15] ARM: dts: imx6dl: Add trip points to thermal zones on several devices Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 08/15] ARM: dts: imx6dl: vicut1: Address USB related warnings Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 09/15] ARM: dts: imx6dl: alti6p: fix different " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 10/15] ARM: dts: imx6dl: prtmvt: " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 11/15] ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 12/15] ARM: dts: imx6ul: prti6g: fix USB over-current " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 13/15] ARM: dts: imx6dl: plybas: " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 14/15] ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 15/15] ARM: dts: imx6qdl: vicut1: rename power to power-button Oleksij Rempel
2023-06-04 13:08 ` [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530120345.2874900-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).