From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Robin van der Gracht <robin@protonic.nl>,
Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
NXP Linux Team <linux-imx@nxp.com>,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v1 04/15] ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC
Date: Tue, 30 May 2023 14:03:34 +0200 [thread overview]
Message-ID: <20230530120345.2874900-5-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20230530120345.2874900-1-o.rempel@pengutronix.de>
From: Robin van der Gracht <robin@protonic.nl>
This commit addresses a misconfiguration in the prtwd2 device tree
source. Specifically, the ENET MDIO and MDC pins were mistakenly
assigned to the Ethernet block, while they are actually used by the I2C4
interface.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boot/dts/imx6q-prtwd2.dts | 3 ---
1 file changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
index 54a57a4548e2..792b8903d345 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -156,9 +156,6 @@ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
/* nINTRP */
MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
-
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
>;
};
--
2.39.2
next prev parent reply other threads:[~2023-05-30 12:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 12:03 [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 01/15] ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 02/15] ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 03/15] ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion Oleksij Rempel
2023-05-30 12:03 ` Oleksij Rempel [this message]
2023-05-30 12:03 ` [PATCH v1 05/15] ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 06/15] ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 07/15] ARM: dts: imx6dl: Add trip points to thermal zones on several devices Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 08/15] ARM: dts: imx6dl: vicut1: Address USB related warnings Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 09/15] ARM: dts: imx6dl: alti6p: fix different " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 10/15] ARM: dts: imx6dl: prtmvt: " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 11/15] ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 12/15] ARM: dts: imx6ul: prti6g: fix USB over-current " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 13/15] ARM: dts: imx6dl: plybas: " Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 14/15] ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings Oleksij Rempel
2023-05-30 12:03 ` [PATCH v1 15/15] ARM: dts: imx6qdl: vicut1: rename power to power-button Oleksij Rempel
2023-06-04 13:08 ` [PATCH v1 00/15] Maintenance updates for Protonic Holland boards Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530120345.2874900-5-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=robin@protonic.nl \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).