From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Sakari Ailus <sakari.ailus@linux.intel.com>,
linux-media@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 08/21] media: i2c: imx258: Add support for 24MHz clock
Date: Tue, 30 May 2023 18:29:47 +0100 [thread overview]
Message-ID: <20230530173000.3060865-9-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20230530173000.3060865-1-dave.stevenson@raspberrypi.com>
There's no reason why only a clock of 19.2MHz is supported.
Indeed this isn't even a frequency listed in the datasheet.
Add support for 24MHz as well.
The PLL settings result in slightly different link frequencies,
so parameterise those.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/i2c/imx258.c | 137 ++++++++++++++++++++++++++++++-------
1 file changed, 111 insertions(+), 26 deletions(-)
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index 5a57d0b5fcd8..d40521f9a3c6 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -76,9 +76,6 @@
#define REG_CONFIG_MIRROR_FLIP 0x03
#define REG_CONFIG_FLIP_TEST_PATTERN 0x02
-/* Input clock frequency in Hz */
-#define IMX258_INPUT_CLOCK_FREQ 19200000
-
struct imx258_reg {
u16 address;
u8 val;
@@ -91,6 +88,7 @@ struct imx258_reg_list {
/* Link frequency config */
struct imx258_link_freq_config {
+ u64 link_frequency;
u32 pixels_per_line;
/* PLL registers for this link frequency */
@@ -115,7 +113,9 @@ struct imx258_mode {
};
/* 4208x3120 needs 1267Mbps/lane, 4 lanes */
-static const struct imx258_reg mipi_data_rate_1267mbps[] = {
+static const struct imx258_reg mipi_1267mbps_19_2mhz[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
{ 0x0301, 0x05 },
{ 0x0303, 0x02 },
{ 0x0305, 0x03 },
@@ -133,7 +133,29 @@ static const struct imx258_reg mipi_data_rate_1267mbps[] = {
{ 0x0823, 0xCC },
};
-static const struct imx258_reg mipi_data_rate_640mbps[] = {
+static const struct imx258_reg mipi_1272mbps_24mhz[] = {
+ { 0x0136, 0x18 },
+ { 0x0137, 0x00 },
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x04 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0xD4 },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+ { 0x0820, 0x13 },
+ { 0x0821, 0x4C },
+ { 0x0822, 0xCC },
+ { 0x0823, 0xCC },
+};
+
+static const struct imx258_reg mipi_640mbps_19_2mhz[] = {
+ { 0x0136, 0x13 },
+ { 0x0137, 0x33 },
{ 0x0301, 0x05 },
{ 0x0303, 0x02 },
{ 0x0305, 0x03 },
@@ -151,9 +173,27 @@ static const struct imx258_reg mipi_data_rate_640mbps[] = {
{ 0x0823, 0x00 },
};
+static const struct imx258_reg mipi_642mbps_24mhz[] = {
+ { 0x0136, 0x18 },
+ { 0x0137, 0x00 },
+ { 0x0301, 0x05 },
+ { 0x0303, 0x02 },
+ { 0x0305, 0x04 },
+ { 0x0306, 0x00 },
+ { 0x0307, 0x6B },
+ { 0x0309, 0x0A },
+ { 0x030B, 0x01 },
+ { 0x030D, 0x02 },
+ { 0x030E, 0x00 },
+ { 0x030F, 0xD8 },
+ { 0x0310, 0x00 },
+ { 0x0820, 0x0A },
+ { 0x0821, 0x00 },
+ { 0x0822, 0x00 },
+ { 0x0823, 0x00 },
+};
+
static const struct imx258_reg mode_common_regs[] = {
- { 0x0136, 0x13 },
- { 0x0137, 0x33 },
{ 0x3051, 0x00 },
{ 0x3052, 0x00 },
{ 0x4E21, 0x14 },
@@ -313,10 +353,6 @@ static const char * const imx258_supply_name[] = {
#define IMX258_NUM_SUPPLIES ARRAY_SIZE(imx258_supply_name)
-/* Configurations for supported link frequencies */
-#define IMX258_LINK_FREQ_634MHZ 633600000ULL
-#define IMX258_LINK_FREQ_320MHZ 320000000ULL
-
enum {
IMX258_LINK_FREQ_1267MBPS,
IMX258_LINK_FREQ_640MBPS,
@@ -335,25 +371,55 @@ static u64 link_freq_to_pixel_rate(u64 f)
}
/* Menu items for LINK_FREQ V4L2 control */
-static const s64 link_freq_menu_items[] = {
+/* Configurations for supported link frequencies */
+#define IMX258_LINK_FREQ_634MHZ 633600000ULL
+#define IMX258_LINK_FREQ_320MHZ 320000000ULL
+
+static const s64 link_freq_menu_items_19_2[] = {
IMX258_LINK_FREQ_634MHZ,
IMX258_LINK_FREQ_320MHZ,
};
+/* Configurations for supported link frequencies */
+#define IMX258_LINK_FREQ_636MHZ 636000000ULL
+#define IMX258_LINK_FREQ_321MHZ 321000000ULL
+
+static const s64 link_freq_menu_items_24[] = {
+ IMX258_LINK_FREQ_636MHZ,
+ IMX258_LINK_FREQ_321MHZ,
+};
+
/* Link frequency configs */
-static const struct imx258_link_freq_config link_freq_configs[] = {
+static const struct imx258_link_freq_config link_freq_configs_19_2[] = {
+ [IMX258_LINK_FREQ_1267MBPS] = {
+ .pixels_per_line = IMX258_PPL_DEFAULT,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mipi_1267mbps_19_2mhz),
+ .regs = mipi_1267mbps_19_2mhz,
+ }
+ },
+ [IMX258_LINK_FREQ_640MBPS] = {
+ .pixels_per_line = IMX258_PPL_DEFAULT,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mipi_640mbps_19_2mhz),
+ .regs = mipi_640mbps_19_2mhz,
+ }
+ },
+};
+
+static const struct imx258_link_freq_config link_freq_configs_24[] = {
[IMX258_LINK_FREQ_1267MBPS] = {
.pixels_per_line = IMX258_PPL_DEFAULT,
.reg_list = {
- .num_of_regs = ARRAY_SIZE(mipi_data_rate_1267mbps),
- .regs = mipi_data_rate_1267mbps,
+ .num_of_regs = ARRAY_SIZE(mipi_1272mbps_24mhz),
+ .regs = mipi_1272mbps_24mhz,
}
},
[IMX258_LINK_FREQ_640MBPS] = {
.pixels_per_line = IMX258_PPL_DEFAULT,
.reg_list = {
- .num_of_regs = ARRAY_SIZE(mipi_data_rate_640mbps),
- .regs = mipi_data_rate_640mbps,
+ .num_of_regs = ARRAY_SIZE(mipi_642mbps_24mhz),
+ .regs = mipi_642mbps_24mhz,
}
},
};
@@ -410,6 +476,9 @@ struct imx258 {
/* Current mode */
const struct imx258_mode *cur_mode;
+ const struct imx258_link_freq_config *link_freq_configs;
+ const s64 *link_freq_menu_items;
+
/*
* Mutex for serialized access:
* Protect sensor module set pad format and start/stop streaming safely.
@@ -717,7 +786,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd,
imx258->cur_mode = mode;
__v4l2_ctrl_s_ctrl(imx258->link_freq, mode->link_freq_index);
- link_freq = link_freq_menu_items[mode->link_freq_index];
+ link_freq = imx258->link_freq_menu_items[mode->link_freq_index];
pixel_rate = link_freq_to_pixel_rate(link_freq);
__v4l2_ctrl_s_ctrl_int64(imx258->pixel_rate, pixel_rate);
/* Update limits and set FPS to default */
@@ -731,7 +800,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd,
vblank_def);
__v4l2_ctrl_s_ctrl(imx258->vblank, vblank_def);
h_blank =
- link_freq_configs[mode->link_freq_index].pixels_per_line
+ imx258->link_freq_configs[mode->link_freq_index].pixels_per_line
- imx258->cur_mode->width;
__v4l2_ctrl_modify_range(imx258->hblank, h_blank,
h_blank, 1, h_blank);
@@ -751,7 +820,7 @@ static int imx258_start_streaming(struct imx258 *imx258)
/* Setup PLL */
link_freq_index = imx258->cur_mode->link_freq_index;
- reg_list = &link_freq_configs[link_freq_index].reg_list;
+ reg_list = &imx258->link_freq_configs[link_freq_index].reg_list;
ret = imx258_write_regs(imx258, reg_list->regs, reg_list->num_of_regs);
if (ret) {
dev_err(&client->dev, "%s failed to set plls\n", __func__);
@@ -986,9 +1055,9 @@ static int imx258_init_controls(struct imx258 *imx258)
imx258->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
&imx258_ctrl_ops,
V4L2_CID_LINK_FREQ,
- ARRAY_SIZE(link_freq_menu_items) - 1,
+ ARRAY_SIZE(link_freq_menu_items_19_2) - 1,
0,
- link_freq_menu_items);
+ imx258->link_freq_menu_items);
if (imx258->link_freq)
imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
@@ -1004,8 +1073,10 @@ static int imx258_init_controls(struct imx258 *imx258)
if (vflip)
vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY;
- pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
- pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]);
+ pixel_rate_max =
+ link_freq_to_pixel_rate(imx258->link_freq_menu_items[0]);
+ pixel_rate_min =
+ link_freq_to_pixel_rate(imx258->link_freq_menu_items[1]);
/* By default, PIXEL_RATE is read only */
imx258->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
V4L2_CID_PIXEL_RATE,
@@ -1123,11 +1194,25 @@ static int imx258_probe(struct i2c_client *client)
"no clock provided, using clock-frequency property\n");
device_property_read_u32(&client->dev, "clock-frequency", &val);
+ } else if (IS_ERR(imx258->clk)) {
+ return dev_err_probe(&client->dev, PTR_ERR(imx258->clk),
+ "error getting clock\n");
} else {
val = clk_get_rate(imx258->clk);
}
- if (val != IMX258_INPUT_CLOCK_FREQ) {
- dev_err(&client->dev, "input clock frequency not supported\n");
+
+ switch (val) {
+ case 19200000:
+ imx258->link_freq_configs = link_freq_configs_19_2;
+ imx258->link_freq_menu_items = link_freq_menu_items_19_2;
+ break;
+ case 24000000:
+ imx258->link_freq_configs = link_freq_configs_24;
+ imx258->link_freq_menu_items = link_freq_menu_items_24;
+ break;
+ default:
+ dev_err(&client->dev, "input clock frequency of %u not supported\n",
+ val);
return -EINVAL;
}
--
2.25.1
next prev parent reply other threads:[~2023-05-30 17:31 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 17:29 [PATCH 00/21] imx258 improvements series Dave Stevenson
2023-05-30 17:29 ` [PATCH 01/21] media: i2c: imx258: Remove unused defines Dave Stevenson
2023-05-31 15:08 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 02/21] media: i2c: imx258: Make image geometry meet sensor requirements Dave Stevenson
2023-05-31 15:09 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 03/21] media: i2c: imx258: Disable digital cropping on binned modes Dave Stevenson
2023-05-31 15:02 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 04/21] media: i2c: imx258: Remove redundant I2C writes Dave Stevenson
2023-05-31 15:10 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 05/21] media: i2c: imx258: Add regulator control Dave Stevenson
2023-05-31 15:11 ` Jacopo Mondi
2023-05-31 15:26 ` Dave Stevenson
2023-05-30 17:29 ` [PATCH 06/21] media: i2c: imx258: Make V4L2_CID_VBLANK configurable Dave Stevenson
2023-05-31 15:16 ` Jacopo Mondi
2023-05-31 15:33 ` Dave Stevenson
2023-05-30 17:29 ` [PATCH 07/21] media: i2c: imx258: Split out common registers from the mode based ones Dave Stevenson
2023-05-31 15:26 ` Jacopo Mondi
2023-05-30 17:29 ` Dave Stevenson [this message]
2023-06-02 12:59 ` [PATCH 08/21] media: i2c: imx258: Add support for 24MHz clock Jacopo Mondi
2023-05-30 17:29 ` [PATCH 09/21] media: i2c: imx258: Add support for running on 2 CSI data lanes Dave Stevenson
2023-05-30 17:37 ` Dave Stevenson
2023-05-31 8:07 ` kernel test robot
2023-06-02 13:23 ` Jacopo Mondi
2023-06-02 17:46 ` Dave Stevenson
2023-05-30 17:29 ` [PATCH 10/21] media: i2c: imx258: Follow normal V4L2 behaviours for clipping exposure Dave Stevenson
2023-05-31 15:27 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 11/21] media: i2c: imx258: Add get_selection for pixel array information Dave Stevenson
2023-06-02 13:24 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 12/21] media: i2c: imx258: Allow configuration of clock lane behaviour Dave Stevenson
2023-06-02 13:26 ` Jacopo Mondi
2023-06-02 15:18 ` Dave Stevenson
2023-05-30 17:29 ` [PATCH 13/21] media: i2c: imx258: Correct max FRM_LENGTH_LINES value Dave Stevenson
2023-06-02 13:33 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 14/21] media: i2c: imx258: Add support for long exposure modes Dave Stevenson
2023-06-02 13:38 ` Jacopo Mondi
2023-06-02 17:12 ` Dave Stevenson
2023-05-30 17:29 ` [PATCH 15/21] media: i2c: imx258: Issue reset before starting streaming Dave Stevenson
2023-06-02 13:42 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 16/21] media: i2c: imx258: Set pixel_rate range to the same as the value Dave Stevenson
2023-06-02 13:44 ` Jacopo Mondi
2023-05-30 17:29 ` [PATCH 17/21] media: i2c: imx258: Support faster pixel rate on binned modes Dave Stevenson
2023-05-30 17:29 ` [PATCH 18/21] dt-bindings: media: imx258: Rename to include vendor prefix Dave Stevenson
2023-05-30 17:35 ` Conor Dooley
2023-05-30 17:29 ` [PATCH 19/21] dt-bindings: media: imx258: Add alternate compatible strings Dave Stevenson
2023-05-30 17:38 ` Conor Dooley
2023-05-30 17:48 ` Dave Stevenson
2023-05-30 19:36 ` Conor Dooley
2023-05-30 17:29 ` [PATCH 20/21] media: i2c: imx258: Change register settings for variants of the sensor Dave Stevenson
2023-06-02 13:48 ` Jacopo Mondi
2023-06-02 14:30 ` Dave Stevenson
2023-05-30 17:30 ` [PATCH 21/21] media: i2c: imx258: Make HFLIP and VFLIP controls writable Dave Stevenson
2023-06-02 13:58 ` Jacopo Mondi
2023-06-02 14:42 ` Dave Stevenson
2023-07-18 12:08 ` [PATCH 00/21] imx258 improvements series Arnaud Ferraris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230530173000.3060865-9-dave.stevenson@raspberrypi.com \
--to=dave.stevenson@raspberrypi.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-media@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).