[PATCH v4 5/6] arm64: dts: qcom: sm8550-mtp: add pmic glink port/endpoints

[Neil Armstrong <neil.armstrong@linaro.org>]

Add nodes to support Type-C USB/DP functionality.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 66 ++++++++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index ec86c5f38045..67e0a2d2042c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -80,7 +80,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
 					};
 				};
 			};
@@ -500,6 +508,37 @@ vreg_l3g_1p2: ldo3 {
 	};
 };
 
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				fsa4480_sbu_mux: endpoint {
+					remote-endpoint = <&pmic_glink_sbu>;
+				};
+			};
+		};
+	};
+};
+
 &lpass_tlmm {
 	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
 		pins = "gpio17";
@@ -558,6 +597,15 @@ &mdss_dsi0_phy {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
 &pcie_1_phy_aux_clk {
 	clock-frequency = <1000>;
 };
@@ -781,7 +829,7 @@ &usb_1_dwc3_hs {
 };
 
 &usb_1_dwc3_ss {
-	remote-endpoint = <&pmic_glink_ss_in>;
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 };
 
 &usb_1_hsphy {
@@ -797,9 +845,23 @@ &usb_dp_qmpphy {
 	vdda-phy-supply = <&vreg_l3e_1p2>;
 	vdda-pll-supply = <&vreg_l3f_0p91>;
 
+	orientation-switch;
+
 	status = "okay";
 };
 
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
 &xo_board {
 	clock-frequency = <76800000>;
 };

-- 
2.34.1