From: Neil Armstrong <neil.armstrong@linaro.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH v2 0/2] typec: add support for the ON Semiconductor nb7vpq904m Type-C Linear Redriver
Date: Wed, 07 Jun 2023 09:51:07 +0200 [thread overview]
Message-ID: <20230601-topic-sm8x50-upstream-redriver-v2-0-dda89b22b1c0@linaro.org> (raw)
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
and DisplayPort ALT Mode Linear Redriver chip found on some devices
with a Type-C port.
The redriver compensates ultra High-Speeed DisplayPort and USB
Super Speed signal integrity losses mainly due to PCB & transmission
cables.
The redriver doesn't support SuperSpeed lines swapping, but
can support Type-C SBU lines swapping.
Support is designed as a Type-C Switch and Retimer, and can propagate
orientation settings to the source endpoint, which is usually
a Super Speed PHY which does the data lanes swapping.
Bindings are added first and can handle the fact data lanes pairs
can be swapped on the PCB.
Compile-time dependencies:
- svid removal at [1]
[1] https://lore.kernel.org/all/20230526131434.46920-1-heikki.krogerus@linux.intel.com/
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v2:
- Switch to "retimer" infrastructure
- Slight style fixups after switch to retimer
- Bindings updates (did not keep Reviewed-by tag for those reasons)
- Update maintainer, was using Bjorn with invalid email
- Fixed swapped lanes mapping
- Switched to retimer-switch
- Fixed i2c top node in example
- Link to v1: https://lore.kernel.org/r/20230601-topic-sm8x50-upstream-redriver-v1-0-6ad21094ff6f@linaro.org
---
Dmitry Baryshkov (1):
usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
Neil Armstrong (1):
dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings
.../devicetree/bindings/usb/onnn,nb7vpq904m.yaml | 141 ++++++
drivers/usb/typec/mux/Kconfig | 8 +
drivers/usb/typec/mux/Makefile | 1 +
drivers/usb/typec/mux/nb7vpq904m.c | 529 +++++++++++++++++++++
4 files changed, 679 insertions(+)
---
base-commit: ac9a78681b921877518763ba0e89202254349d1b
change-id: 20230601-topic-sm8x50-upstream-redriver-6e261edd5cb4
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
next reply other threads:[~2023-06-07 7:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-07 7:51 Neil Armstrong [this message]
2023-06-07 7:51 ` [PATCH v2 1/2] dt-bindings: usb: add ON Semiconductor nb7vpq904m Type-C Linear Redriver bindings Neil Armstrong
2023-06-07 7:51 ` [PATCH v2 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver neil.armstrong
2023-06-08 8:03 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230601-topic-sm8x50-upstream-redriver-v2-0-dda89b22b1c0@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).