devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jack Zhu <jack.zhu@starfivetech.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
	bryan.odonoghue@linaro.org, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Eugen Hristev <eugen.hristev@collabora.com>,
	Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, changhuang.liang@starfivetech.com
Subject: Re: [PATCH v6 1/6] media: dt-bindings: Add JH7110 Camera Subsystem
Date: Thu, 1 Jun 2023 12:20:20 +0300	[thread overview]
Message-ID: <20230601092020.GF22609@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230525083202.67933-2-jack.zhu@starfivetech.com>

Hi Jack,

Thank you for the patch.

On Thu, May 25, 2023 at 04:31:57PM +0800, Jack Zhu wrote:
> Add the bindings documentation for Starfive JH7110 Camera Subsystem
> which is used for handing image sensor data.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Jack Zhu <jack.zhu@starfivetech.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  .../bindings/media/starfive,jh7110-camss.yaml | 180 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 187 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> new file mode 100644
> index 000000000000..c66586d90fa2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> @@ -0,0 +1,180 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive SoC CAMSS ISP
> +
> +maintainers:
> +  - Jack Zhu <jack.zhu@starfivetech.com>
> +  - Changhuang Liang <changhuang.liang@starfivetech.com>
> +
> +description:
> +  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
> +  consists of a VIN controller (Video In Controller, a top-level control unit)
> +  and an ISP.
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-camss
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: syscon
> +      - const: isp
> +
> +  clocks:
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: apb_func
> +      - const: wrapper_clk_c
> +      - const: dvp_inv
> +      - const: axiwr
> +      - const: mipi_rx0_pxl
> +      - const: ispcore_2x
> +      - const: isp_axi
> +
> +  resets:
> +    maxItems: 6
> +
> +  reset-names:
> +    items:
> +      - const: wrapper_p
> +      - const: wrapper_c
> +      - const: axird
> +      - const: axiwr
> +      - const: isp_top_n
> +      - const: isp_top_axi
> +
> +  power-domains:
> +    items:
> +      - description: JH7110 ISP Power Domain Switch Controller.
> +
> +  interrupts:
> +    maxItems: 4
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: Input port for receiving DVP data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              bus-type:
> +                enum: [5, 6]
> +
> +              bus-width:
> +                enum: [8, 10, 12]
> +
> +              data-shift:
> +                enum: [0, 2]
> +                default: 0
> +
> +              hsync-active:
> +                enum: [0, 1]
> +                default: 1
> +
> +              vsync-active:
> +                enum: [0, 1]
> +                default: 1
> +
> +            required:
> +              - bus-type
> +              - bus-width
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Input port for receiving CSI data.
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - power-domains
> +  - interrupts
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    isp@19840000 {
> +        compatible = "starfive,jh7110-camss";
> +        reg = <0x19840000 0x10000>,
> +              <0x19870000 0x30000>;
> +        reg-names = "syscon", "isp";
> +        clocks = <&ispcrg 0>,
> +                 <&ispcrg 13>,
> +                 <&ispcrg 2>,
> +                 <&ispcrg 12>,
> +                 <&ispcrg 1>,
> +                 <&syscrg 51>,
> +                 <&syscrg 52>;
> +        clock-names = "apb_func",
> +                      "wrapper_clk_c",
> +                      "dvp_inv",
> +                      "axiwr",
> +                      "mipi_rx0_pxl",
> +                      "ispcore_2x",
> +                      "isp_axi";
> +        resets = <&ispcrg 0>,
> +                 <&ispcrg 1>,
> +                 <&ispcrg 10>,
> +                 <&ispcrg 11>,
> +                 <&syscrg 41>,
> +                 <&syscrg 42>;
> +        reset-names = "wrapper_p",
> +                      "wrapper_c",
> +                      "axird",
> +                      "axiwr",
> +                      "isp_top_n",
> +                      "isp_top_axi";
> +        power-domains = <&pwrc 5>;
> +        interrupts = <92>, <87>, <88>, <90>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            port@0 {
> +                reg = <0>;
> +                vin_from_sc2235: endpoint {
> +                    remote-endpoint = <&sc2235_to_vin>;
> +                    bus-type = <5>;
> +                    bus-width = <8>;
> +                    data-shift = <2>;
> +                    hsync-active = <1>;
> +                    vsync-active = <0>;
> +                    pclk-sample = <1>;
> +                };
> +            };
> +
> +            port@1 {
> +                reg = <1>;
> +                vin_from_csi2rx: endpoint {
> +                    remote-endpoint = <&csi2rx_to_vin>;
> +                };
> +            };
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 869e1c7fc869..9ef5d0e5dff0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20070,6 +20070,13 @@ M:	Ion Badulescu <ionut@badula.org>
>  S:	Odd Fixes
>  F:	drivers/net/ethernet/adaptec/starfire*
>  
> +STARFIVE CAMERA SUBSYSTEM DRIVER
> +M:	Jack Zhu <jack.zhu@starfivetech.com>
> +M:	Changhuang Liang <changhuang.liang@starfivetech.com>
> +L:	linux-media@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> +
>  STARFIVE DEVICETREES
>  M:	Emil Renner Berthing <kernel@esmil.dk>
>  S:	Maintained

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2023-06-01  9:20 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-25  8:31 [PATCH v6 0/6] Add StarFive Camera Subsystem driver Jack Zhu
2023-05-25  8:31 ` [PATCH v6 1/6] media: dt-bindings: Add JH7110 Camera Subsystem Jack Zhu
2023-06-01  9:20   ` Laurent Pinchart [this message]
2023-05-25  8:31 ` [PATCH v6 2/6] media: admin-guide: Add starfive_camss.rst for Starfive " Jack Zhu
2023-05-25  8:31 ` [PATCH v6 3/6] media: starfive: Add basic driver Jack Zhu
2023-06-01 10:44   ` Laurent Pinchart
2023-06-16  7:02     ` Jack Zhu
2023-06-16 13:13   ` Bryan O'Donoghue
2023-06-19  7:27     ` Jack Zhu
2023-05-25  8:32 ` [PATCH v6 4/6] media: starfive: Add video driver Jack Zhu
2023-06-01 12:59   ` Laurent Pinchart
2023-06-16  7:15     ` Jack Zhu
2023-05-25  8:32 ` [PATCH v6 5/6] media: starfive: Add ISP driver Jack Zhu
2023-05-25  8:32 ` [PATCH v6 6/6] media: starfive: Add VIN driver Jack Zhu
2023-06-01 10:37 ` [PATCH v6 0/6] Add StarFive Camera Subsystem driver Laurent Pinchart
2023-06-16  7:20   ` Jack Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230601092020.GF22609@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=eugen.hristev@collabora.com \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jack.zhu@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=rfoss@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=todor.too@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).